I have recently added an OTGW to my home automation setup, and would like to add it into Domoticz. I think I must be doing something wrong, as no devices appear in Domoticz.
-I am on Rpi, on the latest stable 3.5877
-Allow new hardware devices = on
-Read on this forum that issuing a PS=0 or PS=1 might help. When I do that I see it in being issued in the log, but does not seem to do much
-Reset of ESP chip (serial bridge connected to OTGW) does not help, nor does restarting the entire OTGW, same goes for resetting the boiler but leaving OTGW on -> no devices appear
-On my test setup have also tried updating to beta 3.5985 with the same result
-My OTGW has an ESP chip with esplink (a serial gateway) on it. Connection is nice and stable. In the software on the ESP chip I can see the serial logging without any errors
-When I use otmonitor I can see that the OTGW is working as should.
-When looking in Domoticz's log I see plenty of log entries from the OTGW
-Have even tried enabling relay server in otmonitor and having domoticz connect to that. No different results.2016-11-27 13:56:37.517 OTGW: B40000200
2016-11-27 13:56:38.518 OTGW: T10010600
2016-11-27 13:56:38.518 OTGW: BD0010600
2016-11-27 13:56:39.518 OTGW: T00110000
2016-11-27 13:56:40.519 OTGW: BC011D100
2016-11-27 13:56:40.519 OTGW: T80190000
and so on. I guess a little more than 60 entries per minute.
Have been messing around with this for about a day now.. Any ideas on what I should try next in order to fix this? Running out of ideas.. Any suggestions appreciated!