neo coolcam motion sensor with temp sensor, unknown in domoticz

For Z-Wave related questions in Domoticz
Post Reply
ActionHenk
Posts: 18
Joined: Monday 05 March 2018 4:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by ActionHenk » Saturday 14 April 2018 23:00

Hi,

I have 3 neo coolcam pir sensors PD01Z, they work oke and i can set any parameters in the open z-wave hardware settings tab in domoticz.
013 (0x0d) pir xxxx Neo CoolCam Battery Powered PIR Sensor Neo CoolCam 0x1083 0x0003 2018-04-14 21:32:45 Nee

003 (0x03) pir xxxx Neo CoolCam Battery Powered PIR Sensor Neo CoolCam 0x1083 0x0003 2018-04-14 22:34:15 Nee

002 (0x02) pir xxxx Neo CoolCam Battery Powered PIR Sensor Neo CoolCam 0x1083 0x0003 2018-04-14 22:39:07 Nee

Now i received 3 x neo coolcam pir sensors with temp sensor and it seems they are not fully regonized in latest stable build domoticz v3.8153. They work and they give me 7 devices in the device list. So thats oke, i get the motion, lux and temp sensors. But, i can't set any parameters in the open z-wave hardware settings tab in domoticz. The only thing i can set is the wakeup interval in seconds.

What do i need to do to make domoticz or the z-wave stick (Aeotec ZW090 Z-Stick Gen5 EU) regonize my new pir+temp motion sensors?
I readed about someone that said that later beta builds of domoticz do regonize newer z-wave products. But i want to stay at this stable build. Is their a way i can import the needed files from a beta domoticz build into my stable v3.8153 build? Thanks!!!
022 (0x16) pir xxxx Neo CoolCam Unknown: type=0003, id=108d Neo CoolCam 0x108d 0x0003 2018-04-14 15:38:42 Nee

021 (0x15) pir xxxx Neo CoolCam Unknown: type=0003, id=108d Neo CoolCam 0x108d 0x0003 2018-04-14 15:38:09 Nee

020 (0x14) pir xxxx Neo CoolCam Unknown: type=0003, id=108d Neo CoolCam 0x108d 0x0003 2018-04-14 22:34:25 Nee
Attachments
new pir.jpg
the new pir temp settings
new pir.jpg (38.34 KiB) Viewed 733 times

admin
Site Admin
Posts: 9
Joined: Friday 05 July 2013 18:21
Target OS: -
Domoticz version:
Contact:

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by admin » Sunday 15 April 2018 1:01

Try excluding, updating to the latest beta and include again

ActionHenk
Posts: 18
Joined: Monday 05 March 2018 4:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by ActionHenk » Sunday 15 April 2018 1:51

oke, but then i have holes in my node ID's :D i'm a little autistic and last time i tried to exclude a node, i found out the hard way that the node id that is excluded isn't free. So as autistic as i am i wanted to fill up that hole and i hard resetted everything and included all sensors again. Luckely i found out that if i included all the sensors in the same order as they where before the hard reset, all the devices id's and name's and scenes in domotics where working again without changing anything!

Anyway, i have +- 200 sensors in my devices list and i am stable, so going to a beta release is a bit to much for me i guess. Isn't there a way to import certain files into the stable build?

Is there any sign of a new stable domoticz release? I'm new in this world and really love domoticz but it seems the recent stable build is out for a while?

Thanks for your answer!!

User avatar
Siewert308SW
Posts: 607
Joined: Monday 29 December 2014 16:47
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands - Zoutkamp (gn)
Contact:

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by Siewert308SW » Sunday 15 April 2018 3:58

Why not manual download the beta zip.
Take the Zwave "Config" folder and copy it into your existing Domoticz.
Restart Domoticz and it should be recognized...
Setup:
- RPi3 - PIco HV3.0A / Domo Beta 3.9XXX / RFXtrx433E / Aeotec Gen5
- RPi3 - PIco HV3.0A / PiHole / PiVPN / NAS / Print Server
- Youless Elec&Gas
- FI9803P Cams
- KD101 detectors
- Zwave & KaKu

MyDomoticz scripts: @GitHub
PIco UPS Toolkit: @GitHub

ActionHenk
Posts: 18
Joined: Monday 05 March 2018 4:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by ActionHenk » Sunday 15 April 2018 5:58

I would like that! But, all downloads are .tgz Linux files except for the windows version wich is a zip file but only has an .exe in it.

Can i install the windows version and take the zwave config folder? Or do i have to get the zwave config folder from a Linux/raspberry install? Thanks!

User avatar
Siewert308SW
Posts: 607
Joined: Monday 29 December 2014 16:47
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands - Zoutkamp (gn)
Contact:

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by Siewert308SW » Sunday 15 April 2018 7:50

Why not unzipping the .tgz and copy those config files to your rpi?
There are tons of programs to unzip like 7zip
Setup:
- RPi3 - PIco HV3.0A / Domo Beta 3.9XXX / RFXtrx433E / Aeotec Gen5
- RPi3 - PIco HV3.0A / PiHole / PiVPN / NAS / Print Server
- Youless Elec&Gas
- FI9803P Cams
- KD101 detectors
- Zwave & KaKu

MyDomoticz scripts: @GitHub
PIco UPS Toolkit: @GitHub

ActionHenk
Posts: 18
Joined: Monday 05 March 2018 4:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: neo coolcam motion sensor with temp sensor, unknown in domoticz

Post by ActionHenk » Sunday 15 April 2018 23:54

Oke i tried it, didnt work out :( also excluded and included a sensor.

I guess i have to wait till an new stable build comes out. By the way, i copied the zwave.me folder from the beta .tgz file to the config folder of my raspberry where i first deleted the original zwave.me folder.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest