replace KAKU ACM-3500-3 with Z-Wave

For Z-Wave related questions in Domoticz
Post Reply
NoClaim
Posts: 30
Joined: Sunday 17 May 2015 19:01
Target OS: Raspberry Pi
Domoticz version: 2.2284
Location: the Netherlands
Contact:

replace KAKU ACM-3500-3 with Z-Wave

Post by NoClaim » Sunday 14 January 2018 18:39

Hi,

A few years ago I did my first steps in domotica. I started out with KaKu and now I'm up for the next step.... (at least I believe z-wave is the next step :) )
I replaced already a few lights with Hue (Zigbee), but I also want to replace some switches.

For a central ventilation box of Itho with perilex connector I used the KaKu switch ACM-3500-3 (3 way switch).
Image
I created a blockly event (the base for this schema can be found on this forum) and is working pretty good.... except..... it is 433MHz

What is the best way to transform this ACM-3500-3 to a z-wave solution?

Thank you

Philos31
Posts: 59
Joined: Friday 15 August 2014 22:37
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: replace KAKU ACM-3500-3 with Z-Wave

Post by Philos31 » Sunday 21 January 2018 11:11

Following, very interested.
Saw your solution a while ago, that was very clever.
RasPi2/KaKu/HUE/Xiaomi/Z-Wave/Nuki/Daikin 3,5kw Ururu Sarara/IR Heating Panels all working together with domoticz

NoClaim
Posts: 30
Joined: Sunday 17 May 2015 19:01
Target OS: Raspberry Pi
Domoticz version: 2.2284
Location: the Netherlands
Contact:

Re: replace KAKU ACM-3500-3 with Z-Wave

Post by NoClaim » Sunday 04 February 2018 14:13

:? Unfortunately no-one seems to have the answer. And I was hoping on a simple solution :?

DennisD
Posts: 69
Joined: Friday 18 September 2015 21:46
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: replace KAKU ACM-3500-3 with Z-Wave

Post by DennisD » Sunday 04 February 2018 16:15

https://www.robbshop.nl/domotica/z-wave ... ventilatie, Only 2 speeds or you have to use the 0-10v solution

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest