Cubietruck with OS Debian GNU/Linux 8.10 (jessie)
Domotics version 3.8153 Build Hash: 494fff7
In the Zwave setup the following is found concerning the FGS213
Code: Select all
node id Name Description Manufacture id Type Last seen polling 029 (0x1d) Badkamer_Ventilator FIBARO System FGS213 Switch FIBARO System 0x1000 0x0403 2017-12-14 19:27:48 No
under the devices the switch is given as follow: The icon is not indicating a switch but rather something measuring power
In attach the z-wave cache file can be found.
When I want to control the switch with the blockly script the following is written in the log
The condition is made with a Fibaro FGBS001 universal sensor which is working fine.
Code: Select all
2017-12-14 21:04:11.333 EventSystem: Event triggered: Side_Camera_Alert_1 2017-12-14 21:04:11.337 (Z-Wave ) Light/Switch (Side_Camera_Alert) 2017-12-14 21:04:11.345 OpenZWave: Domoticz has send a Switch command!, Level: 255, NodeID: 29(0x1d) 2017-12-14 21:04:11.367 (Z-Wave ) Light/Switch (Badkamer_Ventilator) 2017-12-14 21:04:15.943 EventSystem: Event triggered: Side_Camera_Alert_2 2017-12-14 21:04:15.947 (Z-Wave ) Light/Switch (Side_Camera_Alert) 2017-12-14 21:04:15.981 OpenZWave: Domoticz has send a Switch command!, Level: 0, NodeID: 29 (0x1d) 2017-12-14 21:04:16.008 (Z-Wave ) Light/Switch (Badkamer_Ventilator)
In the log the device is controlled with dim values instead of on/off.
At the end the switch is not changing state.
When in the 'OpenZWave Control Panel'
I'm able to control the switch.
So I'm not able to control the switch fgs-213 via Domoticz.
Can someone give some advice how to get this working?