Cheap chinese z-wave products

For Z-Wave related questions in Domoticz
geezerrr
Posts: 119
Joined: Tuesday 02 December 2014 23:16
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Cheap chinese z-wave products

Postby geezerrr » Tuesday 20 December 2016 19:15

deennoo wrote:just get a wall plug and a pir, no probleme to add them with domoticz last stable + gen5 w090


Can you try to change the report state (lux) to anytime else then the default 100?

Because I'm unable to change it.
Thnx in advance

deennoo
Posts: 637
Joined: Wednesday 10 December 2014 14:06
Target OS: Linux
Domoticz version: beta
Location: Bordeaux France
Contact:

Re: Cheap chinese z-wave products

Postby deennoo » Tuesday 20 December 2016 19:38

geezerrr wrote:
deennoo wrote:just get a wall plug and a pir, no probleme to add them with domoticz last stable + gen5 w090


Can you try to change the report state (lux) to anytime else then the default 100?

Because I'm unable to change it.
Thnx in advance


Will try but as this is a batterie device it spend lot of his time to sleep (moon icon)

New configuration will be send when device is wake up (each 43200 sec by default (12 Hours)).
Domoticz stable 3.5877 for real & Domoticz beta for test
Rfxtrxe / RFLink / Milight / Yeelight / ESP8266 / MQTT / BLE
http://domo-attitude.fr

deennoo
Posts: 637
Joined: Wednesday 10 December 2014 14:06
Target OS: Linux
Domoticz version: beta
Location: Bordeaux France
Contact:

Re: Cheap chinese z-wave products

Postby deennoo » Wednesday 21 December 2016 10:11

geezerrr wrote:
deennoo wrote:just get a wall plug and a pir, no probleme to add them with domoticz last stable + gen5 w090


Can you try to change the report state (lux) to anytime else then the default 100?

Because I'm unable to change it.
Thnx in advance


got a way to wakeup and udate pr confg quicker :

take pir with you
open it
Make your change on domoticz zwave config and set config to device (clik OK)
then click one time on PIR Button.
and voila.

On mine Lux value isn't send (it creat lux sensor one time and never update, exclud and include again, and lux sensor never came back).
Domoticz stable 3.5877 for real & Domoticz beta for test
Rfxtrxe / RFLink / Milight / Yeelight / ESP8266 / MQTT / BLE
http://domo-attitude.fr

geezerrr
Posts: 119
Joined: Tuesday 02 December 2014 23:16
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Cheap chinese z-wave products

Postby geezerrr » Wednesday 21 December 2016 10:31

Does this mean that you’r not able to change “Ambient Illumination Lux Level Report” parameter 9 from
http://www.pepper1.net/zwavedb/device/894 as well?

deennoo
Posts: 637
Joined: Wednesday 10 December 2014 14:06
Target OS: Linux
Domoticz version: beta
Location: Bordeaux France
Contact:

Re: Cheap chinese z-wave products

Postby deennoo » Wednesday 21 December 2016 10:55

I can change it, but it doesn't send anything to my system
Domoticz stable 3.5877 for real & Domoticz beta for test
Rfxtrxe / RFLink / Milight / Yeelight / ESP8266 / MQTT / BLE
http://domo-attitude.fr

JohnBoy32
Posts: 10
Joined: Friday 04 March 2016 10:23
Target OS: Raspberry Pi
Domoticz version:

Re: Cheap chinese z-wave products

Postby JohnBoy32 » Wednesday 21 December 2016 11:00

geezerrr wrote:Does this mean that you’r not able to change “Ambient Illumination Lux Level Report” parameter 9 from
http://www.pepper1.net/zwavedb/device/894 as well?


I guess that because the sensor is long time in sleeping modus, you will have to wait (untill the sensor is awake) before your update of values is operational in the sensor. Update now and wait and see later (eg tomorrow) that your change has become effective.
Or use the trick mentioned above.

domcao
Posts: 2
Joined: Monday 19 December 2016 22:56
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Cheap chinese z-wave products

Postby domcao » Wednesday 21 December 2016 22:37

lost wrote:Welcome in the happy Neo buyers club...


There are many happy buyers; over 90 people (and the numbers are rising) and I do not see complaints @
https://www.aliexpress.com/item/NEO-COO ... 49261.html
:lol: :lol: :lol:
Не отправленные с моего BlackBerry через Tapatalk

lost
Posts: 66
Joined: Thursday 10 November 2016 10:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Cheap chinese z-wave products

Postby lost » Thursday 22 December 2016 9:23

geezerrr wrote:
deennoo wrote:just get a wall plug and a pir, no probleme to add them with domoticz last stable + gen5 w090


Can you try to change the report state (lux) to anytime else then the default 100?

Because I'm unable to change it.
Thnx in advance


On my side, this is the parameter 6, re-trigger interval, that cannot be changed.
It's at 8s, wanting to set it at 30s or a minute, with param 2 (on/off duration) set to 120s (this setup worked, as well as sentivity change, param 1).

I already included latest config patches (there is a quite recent one that's not in current domoticz stable)

The module finally works, but looks quite problematic on the inclusion side as well as for configuration.

Justinb81
Posts: 38
Joined: Wednesday 22 June 2016 15:58
Target OS: Raspberry Pi
Domoticz version:
Location: The Netherlands
Contact:

Re: Cheap chinese z-wave products

Postby Justinb81 » Thursday 22 December 2016 17:05

nieass4 wrote:
Justinb81 wrote:
nieass4 wrote:I recently recieved my Neo Coolcam Sensors.

5 door/window sensors
8 power plugs
1 flood sensor
1 siren alarm

They are working great so far but the signal doesn't reach that far (with all these sensors together the mesh network looks pretty fine though).

One of the power plugs doesn't seem to work by the way, got it paired but after that it's not working at all and no options to hard reset the plug.
Have to get a new one for that.

I didn't include the siren alarm yet because there is no xml file for it yet and I'm pretty new to domoticz.
Anyone else here also got the siren alarm and created a xml file for it yet?


I have the AS-AB01Z siren as well, and studying on how to create the XML file... just not studying hard enough..
All info needed is here: http://products.z-wavealliance.org/products/1962

Only the Device ID is wrong, that should be
Neo CoolCam Battery Powered Siren/Doorbell: type=0003, id=1088

I am forced by my wife to stay the Christmas holidays with the family in a vacation park, so maybe I will give it a go when there. ;)


I just created the xml file, I'll test it out and submit it to openzwave github


May I test your XML as well?

User avatar
marigo
Posts: 28
Joined: Sunday 31 May 2015 11:04
Target OS: Raspberry Pi
Domoticz version: V3.5877
Location: The Netherlands, Veenendaal
Contact:

Re: Cheap chinese z-wave products

Postby marigo » Friday 23 December 2016 19:36

Today I received the Neo coolcam wall plug. Including was easy in domoticz. Just set domoticz to learn mode en insert de wall plug.
The plug wil be automaticlly added and will show in the hardware list.

What I noticed is that I need to use a F, CEE 7/4 Schuko plug to switch a device. I first used a flat "euro" plug and it seems that the two pins are sometimes to small te make a good connection with the inside of the Neo Coolcam wall plug. So be aware.
Last edited by marigo on Saturday 24 December 2016 10:24, edited 1 time in total.

u01pei
Posts: 30
Joined: Sunday 04 January 2015 17:17
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Cheap chinese z-wave products

Postby u01pei » Friday 23 December 2016 22:57

Price drop for the plug:
http://s.aliexpress.com/ZFnEJvyI

mschut
Posts: 121
Joined: Sunday 23 February 2014 22:40
Target OS: Raspberry Pi
Domoticz version: V3.5613
Location: Netherlands
Contact:

Re: RE: Re: Cheap chinese z-wave products

Postby mschut » Friday 23 December 2016 23:17

LouiS22 wrote:
zalsson wrote:so, now one of my power plugs are dead :( Stopped responding, no reaction when i push the green button. Nothing.... quailty haha


Have you really tried it? You have to push three times quickly. If you hear any clicking noise then it's working. Maybe you should try it with another socket, etc.

Hmmm, two questions about the wall plug. Have a few now and are working great.

However:
-) Two new plugs did not survive being connected to my fridge plug. Was grounded, so don't really know what the problem is. But, cannot find a fuse. There isn't one is there...

-) The plugs do result in a few devices, sometimes a kwh meter, besides Watt. But this one is so not stable. Any idea how I can improve this device?


Verstuurd vanaf mijn SM-G920F met Tapatalk
Last edited by mschut on Saturday 24 December 2016 11:13, edited 1 time in total.

zalsson
Posts: 19
Joined: Friday 04 November 2016 16:18
Target OS: -
Domoticz version:
Contact:

Re: Cheap chinese z-wave products

Postby zalsson » Saturday 24 December 2016 0:30

The one that broke for me is the only one that was used with ground pin connected

Skickat från min A0001 via Tapatalk

Justintime
Posts: 312
Joined: Thursday 21 May 2015 9:08
Target OS: Raspberry Pi
Domoticz version: Beta
Contact:

Re: Cheap chinese z-wave products

Postby Justintime » Saturday 24 December 2016 0:38

The wait is for in wall switches... I have two doorsensors and a wall plug. I think price quality is very good.
Me happy buyer

User avatar
LouiS22
Posts: 261
Joined: Friday 27 February 2015 14:21
Target OS: Raspberry Pi
Domoticz version: beta
Location: Budapest, Hungary
Contact:

Re: Cheap chinese z-wave products

Postby LouiS22 » Saturday 24 December 2016 1:20

My second door sensor was somewhat damaged (actually the reed tube was broken), but I fixed it and it's working. Only it has a loud clicking noise upon contacting/breaking with the magnet. It's somehat funny cause this sensor is placed onto the toilet door. No more sneaking quietly into the loo :D

kurniawan77
Posts: 63
Joined: Wednesday 21 January 2015 21:23
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands
Contact:

Re: Cheap chinese z-wave products

Postby kurniawan77 » Wednesday 28 December 2016 10:32

Received two wall plugs and they work wel! Even works with Eneco toon though without energy readings. In domoticz there is kWh but I get strange results...

Image

Image

Anyone knows why?

Sent from my Nexus 6P using Tapatalk

sincze
Posts: 565
Joined: Monday 02 June 2014 22:46
Target OS: Linux
Domoticz version: 3.6179
Location: Netherlands
Contact:

Re: RE: Re: Cheap chinese z-wave products

Postby sincze » Wednesday 28 December 2016 11:06

domcao wrote:
lost wrote:Welcome in the happy Neo buyers club...


There are many happy buyers; over 90 people (and the numbers are rising) and I do not see complaints @
https://www.aliexpress.com/item/NEO-COO ... 49261.html

Не отправленные с моего BlackBerry через Tapatalk

Great to read the NEO hardware experiences. The store owner is probably reading this forum as well and keeps increasing the price. Now at Fibaro pricing level of §55.
That is twice the 11-11 sales price so probably increasing his margin a bit.

Sent from my SM-G925F using Tapatalk

kurniawan77
Posts: 63
Joined: Wednesday 21 January 2015 21:23
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands
Contact:

Re: Cheap chinese z-wave products

Postby kurniawan77 » Wednesday 28 December 2016 12:09

Well I got mine from here €32,-

Home Automation Z wave Sensor Smart Home EU Power Plug Compatible with Z-wave 300 series and 500 series
http://s.aliexpress.com/fmY3AZbq
(from AliExpress Android)

Sent from my Nexus 6P using Tapatalk

sincze
Posts: 565
Joined: Monday 02 June 2014 22:46
Target OS: Linux
Domoticz version: 3.6179
Location: Netherlands
Contact:

Re: Cheap chinese z-wave products

Postby sincze » Wednesday 28 December 2016 12:16

kurniawan77 wrote:Well I got mine from here €32,-

Home Automation Z wave Sensor Smart Home EU Power Plug Compatible with Z-wave 300 series and 500 series
http://s.aliexpress.com/fmY3AZbq
(from AliExpress Android)

Sent from my Nexus 6P using Tapatalk


Yes keep a look out for different sellers always a good idea :)

trixwood
Posts: 510
Joined: Friday 18 March 2016 8:20
Target OS: -
Domoticz version: Offline
Contact:

Re: Cheap chinese z-wave products

Postby trixwood » Wednesday 28 December 2016 12:51

Some of the sellers are different, with the same post address :-) and they rotate the 'sale' :-)


Return to “Z-Wave”

Who is online

Users browsing this forum: No registered users and 3 guests