Script to read ELV/eQ-3 MAX Temperatur to Domoticz Dummy Device

Must be cleaned all topics go to the right subforum
Post Reply
Gonetolunch
Posts: 3
Joined: Thursday 22 December 2016 15:33
Target OS: Windows
Domoticz version:
Contact:

Script to read ELV/eQ-3 MAX Temperatur to Domoticz Dummy Device

Post by Gonetolunch » Tuesday 14 November 2017 18:47

I found a interesting free software "MAX! HOME AUTOMATION" http://www.dmitry-kazakov.de/ada/max_ho ... mation.htm for Linux or Windows to read out all temperatures or status or to change settings of my ELV/eQ-3 MAX-Devices. This software looks and works very well, but my knowledge about domoticz (script, lua, ect.) is too low to read this values ​​into dummy-devices.

The readout from the "MAX! HOME AUTOMATION" is very simple eg with a http-request:
http://<max-home-automation>/get-temperature?cube=<address>&device=<address>

This query is responded with the current temperature measured eg by a wall-mounted thermostat:
21.8

or:
http://<max-home-automation>/get-valve?cube=<address>&device=<address>

This query is responded with the current valve position of a radiator thermostat 0-100%. The value 100% corresponds to the fully opened valve:
48%

so far so good ... but now i have to put this values eg every minute into my domoticz dummy sensors ...

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests