[MyDomoAtHome] Support thread

Client tools or tools that can connect with Domoticz. Tools for Windows, iOS, Android, Linux etc.
User avatar
mlamie
Posts: 127
Joined: Friday 25 October 2013 17:12
Target OS: Raspberry Pi
Domoticz version: 3.5877
Location: The Netherlands
Contact:

Re: [MyDomoAtHome] Support thread

Postby mlamie » Tuesday 22 November 2016 12:05

Hi Luigi,

I will tell you my experiences. I wanted a wall tablet interface. First I tried the frontpage.html, but that was quite a challenge for me to configure it. So I decided to give ImperiHome a try. It looks nice and is easy to configure. I did purchase the ImperiHome app on iOS and Android. The Android app has some more options LINK. So I continued with Android instead.

I do not have any Nginx experience. My Domoticz installation can only be accessed via the local network. I use OpenVPN if I need to access my local network.

The MyDomoAtHome is installed on my Rpi via the instructions given on github (not the wiki).

The Alarm Panel of Domoticz (the numeric keypad) will not open when you press it in ImperiHome, you can only see the status. So I made a workaround and included a virtual Alarm Active switch (script) to arm/disarm the alarm. See below 2 screenshots. So first image you see 3 buttons at the bottom for the alarm.
1) Deuren, you can see quickly checks if all doors/windows are closed. (in imperihome it is the "composite security widget" this widget contains the status of several sensors and can turn green or red)
2) Alarm Active, when pressed it change the Domoticz security panel status from disarmed to armed. (in imperihome it is a simple switch, green or red)
3) Domoticz Security Panel. (in imperihome "sensor widget" it shows the current sensor value, no green or red only text status update)

Still i'm not 100% happy I would like to include a delay in the Alarm Active switch, but did not manage that yet. It would be nice if the numeric keypad can be opened from the 3rd button.

P.s you can also set the secpanel url in imperihome, but that did not look nice.

I also read you can create a popup if the doorbell is pressed that the front door camera view will be maximized, but also that is still on the to-do list.

First page
Image

Second page:
Image
Gateway: Raspberry Pi 3, RaZberry, RFXtrx433
Parts: Vision ZD 2102, Vision ZM 1601, Greenwave Smart plug 6, KlikAanKlikUit ACDB-7000BC, APIR-2150, AWMR-230, ESP8266 NodeMCU and a Essent E-thermostaat
IP camera: Dahua 4MP IPC-HDBW4421R-AS, Vivotek FD8134V

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Tuesday 22 November 2016 12:08

Hello, Nginx in on your side, both conf are the same.

Imperihome app has no possibility to key in a code, this is a limitation on the app side.
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

Luigi87
Posts: 38
Joined: Thursday 17 March 2016 15:58
Target OS: Linux
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby Luigi87 » Tuesday 22 November 2016 16:30

Thanks for the info.
the app is really looking good and customizable, very nice.

But, does the app also have voice control?

Soon I will update my system with this app and the Nginx proxy :D :D

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Tuesday 22 November 2016 16:37

You have to ask the app developpers (that' not me ;-) : http://www.evertygo.com/imperihome
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

User avatar
mlamie
Posts: 127
Joined: Friday 25 October 2013 17:12
Target OS: Raspberry Pi
Domoticz version: 3.5877
Location: The Netherlands
Contact:

Re: [MyDomoAtHome] Support thread

Postby mlamie » Tuesday 22 November 2016 17:44

Luigi87 wrote:Thanks for the info.
the app is really looking good and customizable, very nice.

But, does the app also have voice control?

Soon I will update my system with this app and the Nginx proxy :D :D


Yes it has. I have tested that, but the build-in version in ImperiHome (android) did not get all my commands.

I can reccommand: Home Automation Voice Commands the app has a bad design, but it works and is not so complicated as Tasker with Autovoice. I can say "Ok Google" it start listening and then for example "turn on the tv lights" those words are captured by the Home Automation Voice Commands app and will switch on (or off) idx ## in Domoticz. Really fun, wife and kids are have a great time. I don't need to buy a Google Home device. The tablet provides the same functionality. Can start Spotify etc. I can even speak dutch, but in English more commands are available.

Another topic is the screen wake-up based on front facing camera motion. I can recommend that as well! Tasker incl. Motion Detector.
Gateway: Raspberry Pi 3, RaZberry, RFXtrx433
Parts: Vision ZD 2102, Vision ZM 1601, Greenwave Smart plug 6, KlikAanKlikUit ACDB-7000BC, APIR-2150, AWMR-230, ESP8266 NodeMCU and a Essent E-thermostaat
IP camera: Dahua 4MP IPC-HDBW4421R-AS, Vivotek FD8134V

Luigi87
Posts: 38
Joined: Thursday 17 March 2016 15:58
Target OS: Linux
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby Luigi87 » Tuesday 22 November 2016 23:12

mlamie wrote:
Luigi87 wrote:Thanks for the info.
the app is really looking good and customizable, very nice.

But, does the app also have voice control?

Soon I will update my system with this app and the Nginx proxy :D :D


Yes it has. I have tested that, but the build-in version in ImperiHome (android) did not get all my commands.

I can reccommand: Home Automation Voice Commands the app has a bad design, but it works and is not so complicated as Tasker with Autovoice. I can say "Ok Google" it start listening and then for example "turn on the tv lights" those words are captured by the Home Automation Voice Commands app and will switch on (or off) idx ## in Domoticz. Really fun, wife and kids are have a great time. I don't need to buy a Google Home device. The tablet provides the same functionality. Can start Spotify etc. I can even speak dutch, but in English more commands are available.

Another topic is the screen wake-up based on front facing camera motion. I can recommend that as well! Tasker incl. Motion Detector.


Oke, nice but i think we will use on our smartphones the Domoticz app because of the rooms overview you can create. and this lacks in imperihome.
But for a cental display the imperirihome is very nice, also the voice commands. What kind of display/tablet do you use

User avatar
mlamie
Posts: 127
Joined: Friday 25 October 2013 17:12
Target OS: Raspberry Pi
Domoticz version: 3.5877
Location: The Netherlands
Contact:

Re: [MyDomoAtHome] Support thread

Postby mlamie » Tuesday 22 November 2016 23:45

Can be any kind of tablet, I use a Nexus 7 (2013), but a chinese android device will work as well.
Gateway: Raspberry Pi 3, RaZberry, RFXtrx433
Parts: Vision ZD 2102, Vision ZM 1601, Greenwave Smart plug 6, KlikAanKlikUit ACDB-7000BC, APIR-2150, AWMR-230, ESP8266 NodeMCU and a Essent E-thermostaat
IP camera: Dahua 4MP IPC-HDBW4421R-AS, Vivotek FD8134V

TroisSix
Posts: 9
Joined: Monday 11 January 2016 10:29
Target OS: Raspberry Pi
Domoticz version: 3.6765
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby TroisSix » Thursday 24 November 2016 16:15

I have a fully fonctionnal Pi2+Domoticz+MDAH, working well 8-)
and for fun I tested the automated packages on syno, and it works also very well 8-)

Great job epierre and jumbotroll, that's excellent to see there is now a automated package for synology, a big change since mdah image in docker ;-)

EDIT: I believed I had a problem with jdah, but no, it was just a port to open (3002, coz it wasn't in firewall rules), and a json fil to copy in /etc/mydomoathome. Works perfect on my DS.
Pi2, Domoticz v3.6765 beta, RFXCOM RFXtrx433, Aeotec Z-Stick Gen5, APC ES700
- rts: dio, oregon, somfy
- zwave: aeotec extender, fibaro fgs212 switch, aeotec smart switch gen5, vision ZG8101
- logitech harmony hub, philips hue, gps Pilot

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Sunday 27 November 2016 12:28

Luigi87 wrote:Oke, nice but i think we will use on our smartphones the Domoticz app because of the rooms overview you can create. and this lacks in imperihome.
But for a cental display the imperirihome is very nice, also the voice commands. What kind of display/tablet do you use


I do the sorting by room, and in Imperihome you can import in the landscape mode your image to do the same as in domticz
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Sunday 27 November 2016 12:28

TroisSix wrote:I have a fully fonctionnal Pi2+Domoticz+MDAH, working well 8-)
and for fun I tested the automated packages on syno, and it works also very well 8-)

Great job epierre and jumbotroll, that's excellent to see there is now a automated package for synology, a big change since mdah image in docker ;-)


great !
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Sunday 27 November 2016 12:29

for those who asked, I am looking at pm2 to replace forever. PM2 says about memory used by the app, see below:

pm2 list
┌──────────┬────┬─────────┬───────┬────────┬─────────┬────────┬─────────────┬──────────┐
│ App name │ id │ mode │ pid │ status │ restart │ uptime │ memory │ watching │
├──────────┼────┼─────────┼───────┼────────┼─────────┼────────┼─────────────┼──────────┤
│ MDAH │ 0 │ cluster │ 15072 │ online │ 2 │ 47s │ 54.859 MB │ enabled │
└──────────┴────┴─────────┴───────┴────────┴─────────┴────────┴─────────────┴──────────┘
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

kubrik
Posts: 52
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby kubrik » Wednesday 30 November 2016 16:17

Hi all!
I'm playing with a domoticz installation on my Synology DS211j.
I'm trying to find a possible solution to MyDomoAtHome that do not install...and the problem is nodejs.
The last installable version is the 0.10 but MDAH requires v4...and ARMv5 (my cpu) isn't more supported by node.

What workaround can i apply to use only synology and imperihome app?
Is there an old version of mdah i can use?

Thanks in advance for your help :)

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Wednesday 30 November 2016 16:19

@kubrik aren't you DSM6 ? in DSM6 you have the right nodejs see: https://www.synology.com/en-global/supp ... oad/DS211j

for those in DSM5, there is this one: http://www.e-nef.com/domoticz/mdah/node ... 0.1.56.spk
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

kubrik
Posts: 52
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby kubrik » Wednesday 30 November 2016 16:30

hi @epierre thanks for your reply.

I've installed nodejs 0.10.
When i try to install MDAH it fails telling that needs v4.0...

Take a look at screesnhots.

node.JPG
node.JPG (13.33 KiB) Viewed 692 times


mdah.JPG
mdah.JPG (20.55 KiB) Viewed 692 times


DSM 6.0

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Wednesday 30 November 2016 16:34

yes from DSM6 there is a nodejs_v4 package available

https://www.synology.com/en-global/dsm/ ... Node_js_v4

but right DS211J is not in...

you have the 0.12 which is good too (0.10 is to be dropped...) :https://www.synology.com/en-global/dsm/app_packages/Node_js

and try the above package and tell me if it works, or I'll resubmit one with DSM6 path and 0.12
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

kubrik
Posts: 52
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby kubrik » Wednesday 30 November 2016 17:30

I can only see 0,10 version as screenshot...i press update into package center but the 0.12 version isn't showed...
How can i download and manually install this 0.12 version?

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Wednesday 30 November 2016 17:39

this should be developer category in the package manager, don't know more...
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

kubrik
Posts: 52
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby kubrik » Wednesday 30 November 2016 17:52

I can confirm that for armv5 the last version is 0.10.
It can be see browsing here:
http://download.synology.com/download/Package/spk/

Probably the 0.12 was broken and removed:
https://forum.synology.com/enu/viewtopic.php?t=106230

Hi,

AMRv5-based Synology NAS (like the x11 models) can only compile Node.js version 0.10.x (See New Node.js 0.12 package is broken on Armada370)
More recent ARM models support node v.0.12.x
...

User avatar
epierre
Posts: 726
Joined: Wednesday 05 March 2014 14:16
Target OS: Linux
Domoticz version:
Location: France
Contact:

Re: [MyDomoAtHome] Support thread

Postby epierre » Wednesday 30 November 2016 17:57

I don't have the link here but they were out before from the community, don't know your arch name:
https://synocommunity.com/package/node

armv7 crashes on armv5 (arm v5 is PI 1 (and 2?)...)
ImperiHome & MyDomoAtHome on top of:
868.42Mhz - Vera Lite - Fibaro SS-101, S-211, K-101, FWP - Fortress SSA2
433Mhz - Cubie Domoticz + RFXtrx + Oregon || Foscam 9821W
2,4Ghz - Cubie MySensors Gateway + COV + TempHumidity + Pressure + WaterMeter

kubrik
Posts: 52
Joined: Wednesday 30 November 2016 16:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: [MyDomoAtHome] Support thread

Postby kubrik » Wednesday 30 November 2016 18:02

Linux DiskStation 2.6.32.12 #8451 Wed Aug 17 05:12:01 CST 2016 armv5tel GNU/Linux synology_88f6281_211j


Return to “Third party and supplementary tools”

Who is online

Users browsing this forum: No registered users and 1 guest