Error Mochad cannot decode 'Not supported 24'

Client tools or tools that can connect with Domoticz. Tools for Windows, iOS, Android, Linux etc.
Post Reply
munion
Posts: 4
Joined: Sunday 13 November 2016 19:23
Target OS: Raspberry Pi
Domoticz version: 3.5837
Location: Madrid, Spain
Contact:

Error Mochad cannot decode 'Not supported 24'

Post by munion » Thursday 12 January 2017 23:30

Hello, I'm munion and I'm having hundreds of errors in my domoticz.log

2017-01-12 22:05:10.329 Error: Mochad: Cannot decode 'Not supported 24'
2017-01-12 22:05:10.331 Error: Mochad: Cannot decode '5D 24 00 00 00 00 00 '
2017-01-12 22:05:10.413 Error: Mochad: Cannot decode 'Not supported 24'
2017-01-12 22:05:10.415 Error: Mochad: Cannot decode '5D 24 00 00 00 00 00 '
2017-01-12 22:05:10.497 Error: Mochad: Cannot decode 'Not supported 24'
2017-01-12 22:05:10.499 Error: Mochad: Cannot decode '5D 24 00 00 00 00 00 '

This is my environment

Raspberry P3 3 and Domoticz V3.5877 installed with domoticz-raspberrypi-sdcard-4834.img
RFXCOM RFXtrx433 USB 433.92MHz Transceiver Version: Ext2/1012

All my devices are working fine, but with that amount of errors my log grows a lot and is very difficult to trace the log.

Do anybody have the same problem, can you help me to fix the problem?.

Best regards

munion

munion
Posts: 4
Joined: Sunday 13 November 2016 19:23
Target OS: Raspberry Pi
Domoticz version: 3.5837
Location: Madrid, Spain
Contact:

Solved Mochad cannot decode 'Not supported 24'

Post by munion » Wednesday 15 February 2017 17:53

I've found the way to hide the problem. I'm not a programmer, just know a little, so of course this is not the best and professional solution but it works.

The solution is to comment out the part of the script that show the error in the log in the configuration file decode.c and recompile it as I did for install mochad.

See lines from #endif to end, are commented with /* * * * */

#if 0
case 0x5A: // CM15A internal RF to PL repeater is on so disable it
dbprintf("Disabling internal RF to PL repeater\n");
x10_write((unsigned char *)"\xdb\x1f\xf0", 3);
x10_write((unsigned char *)"\xfb\x20\x00\x02", 4);
x10_write((unsigned char *)"\xbb\x00\x00\x05\x00\x14\x20\x28", 8);
break;
#endif
/* case 0x24: // ???? quitado por Inaki 2017-01-17 11:42:12.413 Error: Mochad: Cannot decode '5D 24 00 00 00 00 00 '
* case 0x28: // ????
* // 5D 24 EE 11 8E 79 40
* // 5d 28 33 2d 18 e6 a5
* // 5d 28 33 2c 19 e6 a5
* default:
* sockprintf(fd, "Not supported %02X\n", buf[1]);
* sockhexdump(fd, buf, len);
* break;
*/

seansco
Posts: 10
Joined: Tuesday 01 March 2016 21:51
Target OS: Linux
Domoticz version:
Contact:

Re: Error Mochad cannot decode 'Not supported 24'

Post by seansco » Tuesday 09 May 2017 22:17

Interesting. I get the same but with '29'

Code: Select all

Error: Mochad: Cannot decode 'Raw data received: 5D 29 ......
What kind of hardware are you running?

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests