Home Easy (HE876) Dimmer

Others (MiLight, Hue, Toon etc...)
Post Reply
smq
Posts: 32
Joined: Monday 11 August 2014 23:23
Target OS: Raspberry Pi
Domoticz version:
Contact:

Home Easy (HE876) Dimmer

Post by smq » Monday 07 September 2015 22:09

Hello,

I bought several Home Easy HE876 dimmers and paired their with RFX Com and Domoticz.
It's working to send On command but when I trying to set some level of light - it's not working properly. Light level is going up and down unconstant without even touching.
Unfortunately for now dimmers are not usable at all ;(
Anybody has this king of problems? I'm looking for some solutions.

Thank you in advance.

b_weijenberg
Posts: 668
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Home Easy (HE876) Dimmer

Post by b_weijenberg » Tuesday 08 September 2015 12:11

The HE878 shows the same problem. It is not possible to set these modules to a dim level.
The module will switch to a certain dim level but not the correct one and after this command the module becomes frozen for a number of commands following the set dim level.
The HomeEasy EU ON/Off and ARC On/Off operates correct. But the module becomes in a dim cycle on a 2nd On command.
RFXtrx433, RFXtrx433E

s3rgi
Posts: 1
Joined: Thursday 19 May 2016 14:34
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Home Easy (HE876) Dimmer

Post by s3rgi » Sunday 05 June 2016 23:49

I have another problem with one Home Easy HE876. The pairing with Domoticz and RFlink seems to be correct. When I do the automatic search and I press the button of the remote control corresponding the HE876, domoticz creates a switch and see the status of the dimmer when I press the remote control, but when I try to send On/Off command from domoticz the dimmer do not do anything...

DomoB
Posts: 1
Joined: Tuesday 02 August 2016 22:33
Target OS: Raspberry Pi
Domoticz version: 3.4834
Location: Gelderland
Contact:

Re: Home Easy (HE876) Dimmer

Post by DomoB » Wednesday 03 August 2016 12:01

Same problem here, is use scene's to set all my wall lighting to the same dim level but this is not possible with this dimmer.... :-(
Is there a solution or nice work around for this ?

I use the dimmer with rfxcom as: Lighting 2 HomeEasy EU device.

Hesmink
Posts: 175
Joined: Monday 22 June 2015 10:48
Target OS: Raspberry Pi
Domoticz version:
Location: The Netherlands
Contact:

Re: Home Easy (HE876) Dimmer

Post by Hesmink » Sunday 09 October 2016 15:00

Any update on this?
Apparently, the method of dimming for this switch is: 1. Turn lamp on. 2. Turn lamp on again, lamp starts cycling dim levels. 3. Press 'lamp on' again.

Although I'm sending dim levels, the dimmer doesn't respond to it.

reindje
Posts: 3
Joined: Wednesday 14 September 2016 21:07
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Home Easy (HE876) Dimmer

Post by reindje » Sunday 02 April 2017 13:20

Same problem here, no one has get this work with setting dimlevel?

edezwaan82
Posts: 1
Joined: Sunday 24 December 2017 14:37
Target OS: -
Domoticz version:
Contact:

Re: Home Easy (HE876) Dimmer

Post by edezwaan82 » Sunday 24 December 2017 14:39

Hi All,

What is the ID for HE878. Unfortunately I lost my remote so I need to configure it manually.
Can anyone help?

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests