inclusion of Minimote

Compatibility (hardware, devices and OS)
Post Reply
valdoison
Posts: 141
Joined: Monday 03 March 2014 19:33
Target OS: Linux
Domoticz version: 4576
Contact:

inclusion of Minimote

Post by valdoison » Friday 24 July 2015 18:10

Good evening,

Is it a coincidence, but since the directory AEON_LABS turned into AEOTEC in "domoticz/Config" the Minimote is no longer recognized.

Mozart
Posts: 75
Joined: Monday 19 January 2015 15:35
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: inclusion of Minimote

Post by Mozart » Sunday 26 July 2015 11:31

I have the same problem with the Minimote. I'm using the SD Card image with version 2563.
Raspberry 3
Aeon Labs Z-Wave Stick Series 2 - RFLink USB Gateway
Z-Wave switches
433 MHz Temperature + Humidity sensors
Philips Hue Lights
Mi-Light WiFi Bridge + RGBW Controllers

valdoison
Posts: 141
Joined: Monday 03 March 2014 19:33
Target OS: Linux
Domoticz version: 4576
Contact:

Re: inclusion of Minimote

Post by valdoison » Sunday 26 July 2015 11:59

I have the version 2659

Mozart
Posts: 75
Joined: Monday 19 January 2015 15:35
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: inclusion of Minimote

Post by Mozart » Sunday 26 July 2015 12:38

Ok, I fixed it. Here is what I did:

1. Remove the old device from your zwave devices list
2. Remove the buttons that you added (learned) from your switches tab in Domoticz
3. Make sure the old device is really gone from the zwave devices list
4. Reset your Minimote (check the manual how to do that)
5. In Domoticz, go to the zwave hardware page and choose 'Include Node'
6. On the Minimote press the 'Learn' button

That did the trick for me. O, I also updated the firmware on the Minimote to version 1.19 because I did not know if I was on that version.
Raspberry 3
Aeon Labs Z-Wave Stick Series 2 - RFLink USB Gateway
Z-Wave switches
433 MHz Temperature + Humidity sensors
Philips Hue Lights
Mi-Light WiFi Bridge + RGBW Controllers

valdoison
Posts: 141
Joined: Monday 03 March 2014 19:33
Target OS: Linux
Domoticz version: 4576
Contact:

Re: inclusion of Minimote

Post by valdoison » Sunday 26 July 2015 18:09

Good evening,

Indeed, with this method, Domoticz included my Minimote.

But, despite the paramettre 250 is set to "scene", pressing on the buttons does not create new devices.

My MiniMote is updated.

Mozart
Posts: 75
Joined: Monday 19 January 2015 15:35
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: inclusion of Minimote

Post by Mozart » Sunday 26 July 2015 18:12

Yes, that's something I haven't been able to do as well :(
Raspberry 3
Aeon Labs Z-Wave Stick Series 2 - RFLink USB Gateway
Z-Wave switches
433 MHz Temperature + Humidity sensors
Philips Hue Lights
Mi-Light WiFi Bridge + RGBW Controllers

valdoison
Posts: 141
Joined: Monday 03 March 2014 19:33
Target OS: Linux
Domoticz version: 4576
Contact:

Re: inclusion of Minimote

Post by valdoison » Tuesday 25 August 2015 11:48

Hello,
a little "up".
I just do another test. Domoticz recognizes my MiniMote but it is still impossible to create devices.

Mozart
Posts: 75
Joined: Monday 19 January 2015 15:35
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: inclusion of Minimote

Post by Mozart » Tuesday 25 August 2015 12:11

I gave up... I bought the rflink gateway and now use a 433mhz remote to do what I want.
Raspberry 3
Aeon Labs Z-Wave Stick Series 2 - RFLink USB Gateway
Z-Wave switches
433 MHz Temperature + Humidity sensors
Philips Hue Lights
Mi-Light WiFi Bridge + RGBW Controllers

valdoison
Posts: 141
Joined: Monday 03 March 2014 19:33
Target OS: Linux
Domoticz version: 4576
Contact:

Re: inclusion of Minimote

Post by valdoison » Tuesday 25 August 2015 13:00

I will try other ZWAVE remote control.

Mozart
Posts: 75
Joined: Monday 19 January 2015 15:35
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: inclusion of Minimote

Post by Mozart » Tuesday 26 January 2016 18:12

It's an old thread but I got it working. I also created a page on the wiki how to do it:
http://domoticz.com/wiki/Aeotec_Minimote
Raspberry 3
Aeon Labs Z-Wave Stick Series 2 - RFLink USB Gateway
Z-Wave switches
433 MHz Temperature + Humidity sensors
Philips Hue Lights
Mi-Light WiFi Bridge + RGBW Controllers

lmet
Posts: 11
Joined: Wednesday 19 July 2017 22:35
Target OS: Raspberry Pi
Domoticz version: v3.8153
Location: France
Contact:

Re: inclusion of Minimote

Post by lmet » Wednesday 19 July 2017 22:42

Hello,
I can include the minimote but can not change parameter 250 (Scene Mode).
Minimote is v 1.19 firmware . Domoticz last beta version
Seen and tested all above without success. Is there a newer solution ?
thank you in advance for your help

User avatar
Egregius
Posts: 2416
Joined: Thursday 09 April 2015 12:19
Target OS: Raspberry Pi
Domoticz version: BetaRPi2
Location: Beitem, BE
Contact:

Re: inclusion of Minimote

Post by Egregius » Wednesday 19 July 2017 23:25

Why do you wan't scene mode? Group mode works perfect.

lmet
Posts: 11
Joined: Wednesday 19 July 2017 22:35
Target OS: Raspberry Pi
Domoticz version: v3.8153
Location: France
Contact:

Re: inclusion of Minimote

Post by lmet » Friday 21 July 2017 19:28

I read the wiki here "Changing settings" : "Before we can use the Minimote in Domoticz we have to change the parameter: 250. Mode: Group"
I will try again
Thanks

Trevelian
Posts: 4
Joined: Tuesday 11 August 2015 10:30
Target OS: Linux
Domoticz version: 3.8206
Location: BE
Contact:

Re: inclusion of Minimote

Post by Trevelian » Thursday 10 August 2017 0:27

Up, same problem here.

The minimote don't want to wakeup

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests