Mi-Light / LimitlessLED / Applamp

Compatibility (hardware, devices and OS)
marcotrumpet
Posts: 111
Joined: Saturday 18 February 2017 9:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by marcotrumpet » Saturday 29 April 2017 18:56

I can give you settings when wifibridge works .. if it doesn't work (like now, again, damn) I can't acces it. Real problem is that since 3 or 4 days ago everything worked like a charm

Inviato dal mio SM-G950F utilizzando Tapatalk

marcotrumpet
Posts: 111
Joined: Saturday 18 February 2017 9:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by marcotrumpet » Sunday 30 April 2017 10:07

I completely reset the wifibridge. Reinstall all the lights and set them in domoticz like before. If it doesn't work I'll try to buy a new one.
Those are the settings ImageImageImageImage

Inviato dal mio SM-G950F utilizzando Tapatalk

marcotrumpet
Posts: 111
Joined: Saturday 18 February 2017 9:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by marcotrumpet » Sunday 30 April 2017 10:54

Nothing.. error it's here again.. I'll try to buy the lamp (so I can use it in my bedroom) with wifibridge inside.. also in milight android app doesn't work the plus button, I use my ipad

Inviato dal mio SM-G950F utilizzando Tapatalk

Jarn
Posts: 24
Joined: Wednesday 03 February 2016 21:59
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by Jarn » Sunday 30 April 2017 12:32

In the "STA Setting" mode.
You have "Obtain an IP address automaticly set to "Enable", change this to "Disable" and give the bridge a correct ip/subnet.

marcotrumpet
Posts: 111
Joined: Saturday 18 February 2017 9:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RE: Re: Mi-Light / LimitlessLED / Applamp

Post by marcotrumpet » Sunday 30 April 2017 12:41

Jarn wrote:In the "STA Setting" mode.
You have "Obtain an IP address automaticly set to "Enable", change this to "Disable" and give the bridge a correct ip/subnet.
I did it yesterday before reset and the problem aas still there

Inviato dal mio SM-G950F utilizzando Tapatalk

Onkytonk
Posts: 14
Joined: Saturday 24 June 2017 2:47
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by Onkytonk » Friday 30 June 2017 6:03

I've just bought a few Mi.Lights but am having some problems.

I have the wifi bridge v6 (ibox2) and an assortment of bulbs - RGB+CCT and CCT only.

I have configured domoticz to control the RGB+CCT bulb using IP:5987 and that is working with mode set to RGBWW.

However, I can't get the WHITE only bulbs to work. They are working with the mi.lights app, but are not functioning with domoticz. I've added the WHITE mode but they will not control these bulbs.

Obviously I have the IP:PORT set correctly, otherwise the RGB+CCT wouldn't be working.

Can anyone lend some advice please?

neo_hijacker
Posts: 6
Joined: Tuesday 12 August 2014 11:23
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by neo_hijacker » Monday 28 August 2017 0:49

Hi there,

I am pleased to see that the RGB-CCT lamps (with the Mi-light v6 protocol) are finally supported since a few months on the beta versions.

However, the implementation of RGB-CCT (RGBWW) lamps was carried out on the same model as traditional RGBW lamps.

RGB-CCT lamps now have the ability to handle saturation.
If you do not see what I'm talking about: these lamps have the ability to adjust the power of white LEDs while the color LED's are operating. This allows a less aggressive light, by measuring the power of color, warm white, and cold white.

Unfortunately, even with the last beta, it is not possible to manage the saturation by moving the slider from left to right on the color square.

If one of the developers passes on this forum, could he look to add this function? We would be very grateful to him :-)

Nautilus
Posts: 637
Joined: Friday 02 October 2015 12:12
Target OS: Raspberry Pi
Domoticz version: beta
Location: Finland
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by Nautilus » Monday 28 August 2017 9:18

+1 :)

ingepheus
Posts: 1
Joined: Monday 28 August 2017 9:55
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by ingepheus » Monday 28 August 2017 10:11

+1

Hi everyone,

Indeed, the saturation of the milight is a wonderful functionality.
It would be formidable that Domoticz can integrate it ! 8-)

Please ! Please ! :-D

Swifty
Posts: 64
Joined: Saturday 31 December 2016 22:03
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Mi-Light / LimitlessLED / Applamp

Post by Swifty » Friday 15 September 2017 18:18

Can anyone tell me if a full list of the 256 available colour coded for v4/v5 lamps exists anywhere?

I'm working on a solution for integrating a generic led type, but need to know the actual colours and corresponding codes for the milight/limitledsled bulbs.

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests