domoticz in synology as package! Available now.

Others (MiLight, Hue, Toon etc...)
User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Monday 19 February 2018 8:58

moonface wrote:
Monday 19 February 2018 0:25
Hello Jumbotroll,

I have a synology DS 918 + and i couldn’t find any working drivers in your website for my aeotec z stick s2 .

Is it possible for you to build appropriate drivers ?

Many thanks

Best regards

Moonface
DS 918+ use arch-apollolake. All drivers are included in the domoticz packages.
Regards
Jumbotroll
http://www.jadahl.com

moonface
Posts: 9
Joined: Thursday 22 January 2015 15:12
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by moonface » Monday 19 February 2018 9:53

Thanks for your answer and I tried to install apollolake drivers.

The problem is the log shows :


[ 113.034899] usbserial: version magic '4.4.15 SMP preempt mod_unload ' should be '4.4.15+ SMP preempt mod_unload '
[ 113.068743] ftdi_sio: Unknown symbol usb_serial_handle_sysrq_char (err 0)
[ 113.077302] ftdi_sio: Unknown symbol usb_serial_generic_open (err 0)
[ 113.099729] ftdi_sio: Unknown symbol usb_serial_handle_dcd_change (err 0)
[ 113.118669] ftdi_sio: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.143888] ftdi_sio: Unknown symbol usb_serial_generic_unthrottle (err 0)
[ 113.186683] ftdi_sio: Unknown symbol usb_serial_handle_break (err 0)
[ 113.227666] ftdi_sio: Unknown symbol usb_serial_generic_get_icount (err 0)
[ 113.267654] ftdi_sio: Unknown symbol usb_serial_generic_tiocmiwait (err 0)
[ 113.308653] ftdi_sio: Unknown symbol usb_serial_generic_throttle (err 0)
[ 113.349664] ftdi_sio: Unknown symbol usb_serial_register_drivers (err 0)
[ 113.421865] cp210x: Unknown symbol usb_serial_generic_open (err 0)
[ 113.461653] cp210x: Unknown symbol usb_serial_generic_close (err 0)
[ 113.502715] cp210x: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.538687] cp210x: Unknown symbol usb_serial_register_drivers (err 0)

Do you have any idea ?

Thanks for your help.

Moonface

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Monday 19 February 2018 9:57

moonface wrote:
Monday 19 February 2018 9:53
Thanks for your answer and I tried to install apollolake drivers.

The problem is the log shows :


[ 113.034899] usbserial: version magic '4.4.15 SMP preempt mod_unload ' should be '4.4.15+ SMP preempt mod_unload '
[ 113.068743] ftdi_sio: Unknown symbol usb_serial_handle_sysrq_char (err 0)
[ 113.077302] ftdi_sio: Unknown symbol usb_serial_generic_open (err 0)
[ 113.099729] ftdi_sio: Unknown symbol usb_serial_handle_dcd_change (err 0)
[ 113.118669] ftdi_sio: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.143888] ftdi_sio: Unknown symbol usb_serial_generic_unthrottle (err 0)
[ 113.186683] ftdi_sio: Unknown symbol usb_serial_handle_break (err 0)
[ 113.227666] ftdi_sio: Unknown symbol usb_serial_generic_get_icount (err 0)
[ 113.267654] ftdi_sio: Unknown symbol usb_serial_generic_tiocmiwait (err 0)
[ 113.308653] ftdi_sio: Unknown symbol usb_serial_generic_throttle (err 0)
[ 113.349664] ftdi_sio: Unknown symbol usb_serial_register_drivers (err 0)
[ 113.421865] cp210x: Unknown symbol usb_serial_generic_open (err 0)
[ 113.461653] cp210x: Unknown symbol usb_serial_generic_close (err 0)
[ 113.502715] cp210x: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.538687] cp210x: Unknown symbol usb_serial_register_drivers (err 0)

Do you have any idea ?

Thanks for your help.

Moonface
What DSM version do you use? DSM 6.1 or DSM 6.2 beta?
Regards
Jumbotroll
http://www.jadahl.com

moonface
Posts: 9
Joined: Thursday 22 January 2015 15:12
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by moonface » Monday 19 February 2018 9:59

DSM 6.1

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Monday 19 February 2018 10:06

Try to uninstall domoticz and if you have installed older drivers and reinstall domoticz.
This problem with the drivers should be fixed in newest beta.
viewtopic.php?f=17&t=20479
Regards
Jumbotroll
http://www.jadahl.com

moonface
Posts: 9
Joined: Thursday 22 January 2015 15:12
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by moonface » Monday 19 February 2018 10:09

Thank you but in fact I use jeedom so just need the drivers.

Will it be possible to download them directly from your website ?

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Monday 19 February 2018 10:17

moonface wrote:
Monday 19 February 2018 10:09
Thank you but in fact I use jeedom so just need the drivers.

Will it be possible to download them directly from your website ?
Did you test my UsbSerialDrivers_apollolake-6.1_6-11.spk driver ?
Download from here: http://www.jadahl.com/drivers/DSM_6.1/
Regards
Jumbotroll
http://www.jadahl.com

moonface
Posts: 9
Joined: Thursday 22 January 2015 15:12
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by moonface » Monday 19 February 2018 10:38

Thank you.

Tried the last version you provided with the following approach :

Copy your drivers into /usr/lib/modules using a cp -f command (cp -f * from the downloaded directory to /usr/lib/modules)
Restarting the nas

Unfortunately the result is the same :(

Any idea ?

Thank you.

Moonface

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Monday 19 February 2018 18:25

@moonface
Why is not working for you, but working for another users I don't know.
http://www.domoticz.com/forum/viewtopic ... start=1180
Maybe you have some older .ko files in your system.
It's working for domoticz users.
Regards
Jumbotroll
http://www.jadahl.com

moonface
Posts: 9
Joined: Thursday 22 January 2015 15:12
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by moonface » Monday 19 February 2018 18:38

Indeed, it's disappointing ....

Usbserial.ko is only in the following path :

/volume1/@appstore/UsbSerialDrivers/modules/usbserial.ko -> Extracted from your pkg
/usr/lib/modules/usbserial.ko -> Copy of file above

Moonface

moonface
Posts: 9
Joined: Thursday 22 January 2015 15:12
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by moonface » Monday 19 February 2018 21:55

Jumbotroll,

I have tried to remove cp210x.ko and usbserial.ko from my system.

I have rebooted by NAS and install Domoticz package ....

Even with it, I have the following errors and the USB key is not recognized by Domoticz either :

[ 113.173539] cp210x: Unknown symbol usb_serial_generic_open (err 0)
[ 113.180477] cp210x: Unknown symbol usb_serial_generic_close (err 0)
[ 113.187697] cp210x: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.195247] cp210x: Unknown symbol usb_serial_register_drivers (err 0)
[ 113.250909] pl2303: Unknown symbol usb_serial_handle_sysrq_char (err 0)
[ 113.258434] pl2303: Unknown symbol usb_serial_generic_open (err 0)
[ 113.265429] pl2303: Unknown symbol usb_serial_generic_close (err 0)
[ 113.272537] pl2303: Unknown symbol usb_serial_handle_dcd_change (err 0)
[ 113.279958] pl2303: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.287475] pl2303: Unknown symbol usb_serial_handle_break (err 0)
[ 113.294504] pl2303: Unknown symbol usb_serial_generic_tiocmiwait (err 0)
[ 113.302052] pl2303: Unknown symbol usb_serial_register_drivers (err 0)
[ 113.369558] ch341: Unknown symbol usb_serial_generic_open (err 0)
[ 113.376445] ch341: Unknown symbol usb_serial_generic_close (err 0)
[ 113.383429] ch341: Unknown symbol usb_serial_handle_dcd_change (err 0)
[ 113.390834] ch341: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.398273] ch341: Unknown symbol usb_serial_generic_tiocmiwait (err 0)
[ 113.405717] ch341: Unknown symbol usb_serial_register_drivers (err 0)
[ 113.466790] ti_usb_3410_5052: Unknown symbol usb_serial_deregister_drivers (err 0)
[ 113.476539] ti_usb_3410_5052: Unknown symbol usb_serial_generic_get_icount (err 0)
[ 113.496853] ti_usb_3410_5052: Unknown symbol usb_serial_generic_tiocmiwait (err 0)
[ 113.531618] ti_usb_3410_5052: Unknown symbol usb_serial_register_drivers (err 0)

Moonface

michaelb
Posts: 9
Joined: Wednesday 25 January 2017 20:37
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by michaelb » Tuesday 20 February 2018 22:47

Hi,
I've installed the latest beta for DMS6.1 with Python (domoticz_cedarview-6.1_3.0.8924-7) and it's running like clockwork!

However the time in Domoticz is 1 hour behind the time set on the NAS. I cannot find a setting for this but it puts my schedule off with one hour. Any fix for this?

Thanks for your excellent work Jumbotroll!

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Tuesday 20 February 2018 22:55

michaelb wrote:
Tuesday 20 February 2018 22:47
Hi,
I've installed the latest beta for DMS6.1 with Python (domoticz_cedarview-6.1_3.0.8924-7) and it's running like clockwork!

However the time in Domoticz is 1 hour behind the time set on the NAS. I cannot find a setting for this but it puts my schedule off with one hour. Any fix for this?

Thanks for your excellent work Jumbotroll!
Try to set your location in Setup -> latitude and longitude.
Regards
Jumbotroll
http://www.jadahl.com

michaelb
Posts: 9
Joined: Wednesday 25 January 2017 20:37
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by michaelb » Tuesday 20 February 2018 23:41

jumbotroll wrote:
michaelb wrote:
Tuesday 20 February 2018 22:47
Hi,
I've installed the latest beta for DMS6.1 with Python (domoticz_cedarview-6.1_3.0.8924-7) and it's running like clockwork!

However the time in Domoticz is 1 hour behind the time set on the NAS. I cannot find a setting for this but it puts my schedule off with one hour. Any fix for this?

Thanks for your excellent work Jumbotroll!
Try to set your location in Setup -> latitude and longitude.
Strangely the location was set correctly but changing it twice did the trick. Thanks for the quick response!

Verstuurd vanaf mijn SM-J510FN met Tapatalk


teo1966
Posts: 7
Joined: Saturday 18 November 2017 13:09
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by teo1966 » Saturday 24 February 2018 11:46

Hello Jumbotroll

cant you for me make a domoticz package for this synology DS508 whit this soft/hardware DSM 4.0-2265 Freescale PowerQUICC III MPC8543 PPC

thanks

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Saturday 24 February 2018 13:08

teo1966 wrote:
Saturday 24 February 2018 11:46
Hello Jumbotroll

cant you for me make a domoticz package for this synology DS508 whit this soft/hardware DSM 4.0-2265 Freescale PowerQUICC III MPC8543 PPC

thanks
Sorry, it is not possible to compile on that DSM version.
I did test to compile for DSM 4.0-2265 ppc854x, but it's to many errors and the toolchain/kernel is to old for that DSM version to build domoticz.
Regards
Jumbotroll
http://www.jadahl.com

teo1966
Posts: 7
Joined: Saturday 18 November 2017 13:09
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by teo1966 » Saturday 24 February 2018 13:42

jumbotroll wrote:
Saturday 24 February 2018 13:08
teo1966 wrote:
Saturday 24 February 2018 11:46
Hello Jumbotroll

cant you for me make a domoticz package for this synology DS508 whit this soft/hardware DSM 4.0-2265 Freescale PowerQUICC III MPC8543 PPC

thanks
Sorry, it is not possible to compile on that DSM version.
I did test to compile for DSM 4.0-2265 ppc854x, but it's to many errors and the toolchain/kernel is to old for that DSM version to build domoticz.
thanks i donate 10 euro for all the work for now and in the future ;)

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Saturday 24 February 2018 13:44

teo1966 wrote:
Saturday 24 February 2018 13:42

thanks i donate 10 euro for all the work for now and in the future ;)
Thanks! :)
Regards
Jumbotroll
http://www.jadahl.com

jnoel68
Posts: 12
Joined: Tuesday 14 June 2016 15:44
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: domoticz in synology as package! Available now.

Post by jnoel68 » Wednesday 07 March 2018 10:52

Hi Jumbotroll
Just upgraded to beta version (domoticz_x86-6.1_3.0.8975-7.spk), but it's clearly not working. I'm no more able to get any page (only a combobox at the top left corner of the page) .... so trying back to revert to stable version, but the synology package center doesn't allow me to rollback to this older version.
Any idea why ? How can I rollback to a stable version which is working fine ?
Thx for your help

User avatar
jumbotroll
Posts: 621
Joined: Tuesday 13 January 2015 15:36
Target OS: NAS (Synology & others)
Domoticz version: Beta
Location: Oslo,Norway
Contact:

Re: domoticz in synology as package! Available now.

Post by jumbotroll » Wednesday 07 March 2018 15:30

jnoel68 wrote:
Wednesday 07 March 2018 10:52
Hi Jumbotroll
Just upgraded to beta version (domoticz_x86-6.1_3.0.8975-7.spk), but it's clearly not working. I'm no more able to get any page (only a combobox at the top left corner of the page) .... so trying back to revert to stable version, but the synology package center doesn't allow me to rollback to this older version.
Any idea why ? How can I rollback to a stable version which is working fine ?
Thx for your help
Very strange! I use domoticz_x86-6.1_3.0.8975-7.spk on DS712+ here without any problem.
Try to clear your browser.
You can't roll back domoticz packages on synology, but you can take backup of database/script and reinstall to the stable package..
Regards
Jumbotroll
http://www.jadahl.com

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests