Low cost window/door sensor

Compatibility (hardware, devices and OS)
b_weijenberg
Posts: 630
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Low cost window/door sensor

Post by b_weijenberg » Thursday 22 December 2016 21:20

If you can use Ext2 firmware enable Lighting4 and X10 and the Kerui sensor will be decoded by the RFXtrx433E as a X10 security sensor.
RFXtrx433, RFXtrx433E

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by Melissen » Friday 23 December 2016 17:35

Hi, my sensor came in today. Tried to learn it AUTOMATIC, but no succes. (clone of a Kerui D026, but also a KR-D026)
Sensor lights when door is closed, opens or the switch on the back goes to 'unmounted' (protection if someone removes the switch)

In RFXmngr with Undec ON and only Lighting 4 ON, I get these messages:

How should I install this sensor? I already installed version 1012 on my RFXcom433E.
Attachments
20161223_161829.jpg
20161223_161829.jpg (72.86 KiB) Viewed 1703 times
20161223_161758.jpg
20161223_161758.jpg (80.51 KiB) Viewed 1703 times
Schermafdruk 2016-12-23 16.05.53.png
Schermafdruk 2016-12-23 16.05.53.png (73.48 KiB) Viewed 1703 times
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by Melissen » Friday 23 December 2016 18:13

Here another pic of the manual of the door-sensor.
Attachments
20161223_171020.jpg
20161223_171020.jpg (42.04 KiB) Viewed 1696 times
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by Melissen » Friday 23 December 2016 19:04

Already got it to work in Domoticz. Was maybe a problem with too may protocols on. Turned almost every protocol off and now it works...

Now finding out what the statusses are for programming the switch in LUA
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by Melissen » Thursday 12 January 2017 19:15

Hi,

Problem with the Kerui sensors is: the look the same, but they have different protocols.
Also if you have Rubicson enabled, the most sensors won't respond.

They are working on a fix (new firmware), but it's not perfect yet.

At least, I've got mine working with a lot of support. (thx Bert)
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Friday 17 February 2017 14:54

Hi Melissen,

Do they send andON signal only, or ON & OFF?
I am looking now for new sensors, but i want them to report ON/OFF

User avatar
sincze
Posts: 722
Joined: Monday 02 June 2014 22:46
Target OS: Linux
Domoticz version: 3.8153
Location: Netherlands
Contact:

Re: Low cost window/door sensor

Post by sincze » Saturday 18 February 2017 23:38

ArieKanarie wrote:Hi Melissen,

Do they send andON signal only, or ON & OFF?
I am looking now for new sensors, but i want them to report ON/OFF
+1 for this question indeed. :D
Using Pass2php since 2016-12
LAN: RFLink, P1-Port, OTGW, MySensors
USB: RFXCom, ZWave
WIFI: Mi-light Wifi-Bridge, Sonoff, ESP8266, Xiaomi Gateway
Solar: Omnik Inverter, PVOutput
Video: Kodi clients with Harmony HUB
Sensors: You name it I probably got 1.

bernardstef
Posts: 4
Joined: Friday 24 February 2017 10:04
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by bernardstef » Friday 24 February 2017 10:07

Hi, I can confirm, they send 3 different signals : On, off, and tamper (when dismounted from the door/wall)

Link : https://fr.aliexpress.com/item/High-gra ... 21054.html

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Friday 24 February 2017 10:17

"Désolé, cet article n'est plus disponible !" :-(

bernardstef
Posts: 4
Joined: Friday 24 February 2017 10:04
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by bernardstef » Friday 24 February 2017 13:46

Oh I just see that .... I bought this set 2 weeks ago and received them this week ... from this listing.

Sorry ... But I can confirm they are the same as pictured by Melissen (same insides)

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Thursday 02 March 2017 18:56


jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Friday 03 March 2017 13:00

Just ordered these.. now hope they send different open close tamper signal that rflink van decode. They don't have the brand name on it..
@ariekanarie: did You manage to get the other two up and running? You reported that two sensors could not be paired with your system.

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Friday 03 March 2017 15:15

Yes, finally I succeeded, with help. (disabeling all other protocols was the trick)
But that was not with the sensors from my last post, that was with other doorsensors, which I wanna replace because they only send ON signal.
The ones from my last post should be the same as the ones from Bernardstef.

jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Friday 10 March 2017 9:00

Received them very fast. Using IT with rflink but receive continuous other id and unit. Not useable this way. Maybe i should contact rflink team...

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Tuesday 14 March 2017 11:03

That is a shame :-(

tontze
Posts: 238
Joined: Thursday 12 January 2017 16:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by tontze » Tuesday 14 March 2017 13:16

jackderuiter wrote:Received them very fast. Using IT with rflink but receive continuous other id and unit. Not useable this way. Maybe i should contact rflink team...
Sooo .. they are not working with rflink ?
-----------------------------------------
Rpi 3 / Razberry 2
RFLink 433mhz / Nrf 2.4Ghz
Mi Light
ESP82xx

jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Tuesday 14 March 2017 16:31

Not yet. Had a reply from rflink guys but it is not yet working. Should use learning mode but debug log shows IT is not showing correct responses.

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Tuesday 02 May 2017 9:48

Any luck yet?
Still looking for some nice door/window sensors with on/off signal..

scottydj2
Posts: 16
Joined: Monday 06 February 2017 12:09
Target OS: Windows
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by scottydj2 » Tuesday 02 May 2017 9:59

I also also ordered these.

They worked out of the box with RFLink R46 firmware for me:

Unit 0 off for close
Unit 1 on for open
Unit 2 on for tamper alarm.

Commands seem to be sent 3 times each.

Cheers

Scott

jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Tuesday 02 May 2017 21:14

I did not get it up and running with these or at least similar looking sensors. Still gave me different main and unit ids. Rflink progamming command feature did not work for me.

Verstuurd vanaf mijn XT1562 met Tapatalk

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests