Low cost window/door sensor

Compatibility (hardware, devices and OS)
jarwis
Posts: 13
Joined: Wednesday 11 November 2015 14:11
Target OS: Raspberry Pi
Domoticz version: 2.3530
Location: Finland
Contact:

Re: Low cost window/door sensor

Post by jarwis » Thursday 08 September 2016 17:34

SteGe wrote:I also ordered the Oudi door sensor. But when I add it as a switch it only turn on, and never gets off (also won't turn off when I click it by hand). Should I change it to another type of switch?
You need to set off delay. I've set it to 10 seconds but you can use what ever suits you.
Attachments
Screen Shot 2016-09-08 at 6.30.45 PM.png
Screen Shot 2016-09-08 at 6.30.45 PM.png (168.12 KiB) Viewed 1728 times

SteGe
Posts: 35
Joined: Saturday 02 July 2016 13:54
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Low cost window/door sensor

Post by SteGe » Sunday 11 September 2016 14:30

Thx, that's works! Now I'm getting a notification when somebody opens my postbox. Will get a camera in the near future so that I can get a picture when somebody is at the door or opens the letterbox.
Raspberry pi 3b
RFXtrx433E
Sompfy sunscreen
Cresta weatherstation
4 elro power switches
Doorbell/chime
Letterbox "reader"
Eneco Toon (also for reading smartmeter by P1)
MySensors (Humidity, Temperature, Lux)

sploutchi
Posts: 15
Joined: Friday 11 July 2014 10:46
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by sploutchi » Monday 24 October 2016 11:30

Hi all !

I just found this product : https://fr.aliexpress.com/af/detecteur- ... lanktest=0

Do you know if it is compatible with Domoticz , if yes, which protocol.
Do you know if it send ON and OFF signal to notify when a door is open and when it is closed?

Thx !

Bastien

jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Saturday 12 November 2016 22:18

just bought this sensor and can report it's working ok with RFLink and Domoticz. Battery (23A) was included altough not clearly specified. Just ordered another two of these. mounted it in my snail mail box by soldering a wired reed contact so it fitted better and the main unit could be mounted on the inside of the door. Don;t know yet about battery life, but we'll see. Noticed some other sensors in Domotics device list that are probably the same (ev1527 and eurodomest) with some similar codes...

Treve
Posts: 15
Joined: Thursday 05 November 2015 11:37
Target OS: Raspberry Pi
Domoticz version: v3.5877
Location: Rotterdam, NL
Contact:

Re: Low cost window/door sensor

Post by Treve » Sunday 13 November 2016 10:09

jackderuiter wrote:just bought this sensor and can report it's working ok with RFLink and Domoticz. Battery (23A) was included altough not clearly specified. Just ordered another two of these. mounted it in my snail mail box by soldering a wired reed contact so it fitted better and the main unit could be mounted on the inside of the door. Don;t know yet about battery life, but we'll see. Noticed some other sensors in Domotics device list that are probably the same (ev1527 and eurodomest) with some similar codes...
Witch signal generates this sensor? on/off, on or off?
RFXtrx433E,
Raspberry Pi2,
Domoticz v3.5877,
Devices (7x switch, 3x doorcontact, 4x temp. sensor, 2x Pir sensor, 1 smoke sensor, 4 Mi-light lamps)

jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Sunday 20 November 2016 17:23

only on. However somtimes ip pops up as a ev1527 and then as eurodomest, both with other id's so don't know if it's a domoticz/rflink/transmitter issue.. Worked ok last week, but since this weekend it switched ID..

jackderuiter
Posts: 19
Joined: Thursday 27 October 2016 22:36
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by jackderuiter » Friday 02 December 2016 20:10

IMG-20161202-WA0008.jpeg
IMG-20161202-WA0008.jpeg (39.92 KiB) Viewed 1448 times
Just received another 433 door contact with ev1527. really Nice casing compared to some other uggly Chinese door sensors. Don't know yet about battery Life ofcourse but we will see. Only reporting on signal as usual with these sensors.

josimd
Posts: 51
Joined: Saturday 09 January 2016 20:47
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by josimd » Friday 02 December 2016 22:32

I bought several Kerui D026, they are cheap and are looking very nice! Works fine with domoticz + RFX

jumping
Posts: 11
Joined: Tuesday 19 July 2016 14:49
Target OS: Raspberry Pi
Domoticz version: 3.5877
Location: Italy
Contact:

Re: Low cost window/door sensor

Post by jumping » Saturday 03 December 2016 13:08

josimd wrote:I bought several Kerui D026, they are cheap and are looking very nice! Works fine with domoticz + RFX
Does the kerui d026 generate on/off signal?

I'm looking for a cheap door sensor able to send an on/off signal :D :D
thanks
Domoticz + Mysensors 2.0 ESP8266 GW + RFlink + Philips Hue 2.0 + Netatmo Thermostat

josimd
Posts: 51
Joined: Saturday 09 January 2016 20:47
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by josimd » Saturday 03 December 2016 23:07

Yes, generates an On and Off pulse..


Verzonden vanaf mijn iPhone met Tapatalk

robertje221
Posts: 14
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by robertje221 » Monday 05 December 2016 18:03

josimd wrote:I bought several Kerui D026, they are cheap and are looking very nice! Works fine with domoticz + RFX
How did you get it worked with a RFX?


Verzonden vanaf mijn iPhone met Tapatalk

josimd
Posts: 51
Joined: Saturday 09 January 2016 20:47
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by josimd » Monday 05 December 2016 18:08

robertje221 wrote:
josimd wrote:I bought several Kerui D026, they are cheap and are looking very nice! Works fine with domoticz + RFX
How did you get it worked with a RFX?


Yes, works with RFX


Verzonden vanaf mijn iPhone met Tapatalk

robertje221
Posts: 14
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by robertje221 » Monday 05 December 2016 18:09

josimd wrote:
robertje221 wrote:
josimd wrote:I bought several Kerui D026, they are cheap and are looking very nice! Works fine with domoticz + RFX
How did you get it worked with a RFX?


Yes, works with RFX


Verzonden vanaf mijn iPhone met Tapatalk
How did you add the kerui d026 sensor? Is it protocol lightning 4 and then learning mode or manual mode?


Verzonden vanaf mijn iPhone met Tapatalk

josimd
Posts: 51
Joined: Saturday 09 January 2016 20:47
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by josimd » Monday 05 December 2016 18:13

robertje221 wrote:
josimd wrote:
robertje221 wrote:
How did you get it worked with a RFX?


Yes, works with RFX


Verzonden vanaf mijn iPhone met Tapatalk
How did you add the kerui d026 sensor? Is it protocol lightning 4 and then learning mode or manual mode?


Verzonden vanaf mijn iPhone met Tapatalk
Yes lightning 4 (hardware tab) after sensing the kerui it will apear in 'apparaten'


Verzonden vanaf mijn iPhone met Tapatalk

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Tuesday 06 December 2016 15:59

I bought some Kerui-like sensors form AlieExpress, and connected them yesterday without any problems. (PT2262, lightning 4)
That is.... 3 of 5 connected flawless when I used the learning mode.
But 2 of the sensors won't connect, no matter what I try, the sensor has a red led which flashes when activated (sensor disconnects), and that still works, I only get so see the hiddious "Time Out, Try again" in Domoticz.


Any suggestions what I could try?

b_weijenberg
Posts: 630
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Low cost window/door sensor

Post by b_weijenberg » Tuesday 06 December 2016 18:39

@ArieKanarie: please check with RFXmngr with only Lighting4 and undec on enabled. If you don't receive all contact support rfxcom.com

On request a beta version Ext2 firmware is available for real Kerui sensors to receive these sensors as security sensor.
RFXtrx433, RFXtrx433E

ArieKanarie
Posts: 32
Joined: Saturday 12 December 2015 14:25
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by ArieKanarie » Tuesday 06 December 2016 23:32

@b_weijenberg
When connected with RFXmngr I can see the messages being transmitted.

Code: Select all

------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:0CFCE0 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:12DFF380 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:0EFF38 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:12DFF380 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:0BF980 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:0AFC40 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:11BFE700 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:14F7FCE0 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:12DFF380 
------------------------------------------------
------------------------------------------------
Packettype        = UNDECODED RF Message
UNDECODED ARC:0FFF9C 
------------------------------------------------
------------------------------------------------
Connected the rfxtrx back to the pi, (updated the firmware to 1011) and learning the switch still fails.

b_weijenberg
Posts: 630
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Low cost window/door sensor

Post by b_weijenberg » Wednesday 07 December 2016 10:16

The sensor does not transmit correct Lighting4 packets and is not a Kerui compatible sensor.
Contact support rfxcom.com for further investigation.
RFXtrx433, RFXtrx433E

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by Melissen » Sunday 11 December 2016 19:34

Does this one work with ver1011? Or should I buy real Kerui-sensors? This one should have ON and OFF mode too

https://www.aliexpress.com/item/High-gr ... 2167&tpp=1
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

sploutchi
Posts: 15
Joined: Friday 11 July 2014 10:46
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Low cost window/door sensor

Post by sploutchi » Thursday 22 December 2016 19:24

Hi !
I just received these 6 KERUI door sensor and i try to configure it in domotic.
Image


When i open the door, the device "Ouverture chambre" receive a message
When i close the door, the device "
Image

In "Switch" tab ... no update on devices ....

Please can someone post screenshot of his device configuration pls ?

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests