connect domoticz with Jäger bridge

Others (MiLight, Hue, Toon etc...)
Post Reply
ivovangastel
Posts: 6
Joined: Tuesday 31 January 2017 19:05
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Netherlands
Contact:

connect domoticz with Jäger bridge

Post by ivovangastel » Saturday 23 December 2017 22:28

hi people,
I have an enocean wireless switch and aktor (dimmer) from Jäger (not busch-jäger) called Opus bridge.
also I have the USB300 gateway, which i connected to my raspberry pi 3.
I coupled the emitter and aktor together. But I am not able to connect Domoticz to the aktor.
to couple the emitter to the aktor, I had to put the aktor in learning mode and push 3x within 2 seconds on the emittor.
do i need to push the test button also 3 times?
i created a blocky to send a "on" signal at 0.5s, 1,3s and 1,5s after activation of the blocky. but this does not work.
I can read the wireless traffic from the devices with the programm Dolphinview on my windows pc and the usb gateway. so i assume the usb gateway and wireless switch and aktor are compatible with each other.
does anyone have an idea to connect domoticz with my aktor?

regard and happy holidays,
Ivo

ivovangastel
Posts: 6
Joined: Tuesday 31 January 2017 19:05
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Netherlands
Contact:

Re: connect domoticz with Jäger bridge

Post by ivovangastel » Monday 25 December 2017 18:27

I see in the log of domoticz that the enocean traffic can be read. i also see the message: "EnOcean: Need Teach-In for 050BFACC".

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest