Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Others (MiLight, Hue, Toon etc...)
Post Reply
User avatar
dk78
Posts: 31
Joined: Monday 07 March 2016 16:50
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Veldhoven
Contact:

Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by dk78 » Wednesday 27 September 2017 9:20

Hello fellow Domoticans,

I've this light switch from Neo Coolcam: http://www.szneo.com/en/products/show.php?id=196

Image

It's a Z-wave Light Switch (EU-2) and I can add it in Domoticz. It has the ID 0x108b and type 0x0003 but the description is Neo CoolCam Unknown: type=0003, id=108b+. The switch functions work also in Domoticz V3.8441. But in my device overview I got 3 devices (switches). It looks like the first and second one are the same (when toggle them, I see the same button change) and the third is the other one. Does someone have the same switch and knows what's the difference is in the first 2 devices in Domoticz?

User avatar
LouiS22
Posts: 488
Joined: Friday 27 February 2015 14:21
Target OS: Raspberry Pi
Domoticz version: beta
Location: Budapest, Hungary
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by LouiS22 » Wednesday 27 September 2017 10:16

dk78 wrote:
Wednesday 27 September 2017 9:20
Hello fellow Domoticans,

I've this light switch from Neo Coolcam: http://www.szneo.com/en/products/show.php?id=196

Image

It's a Z-wave Light Switch (EU-2) and I can add it in Domoticz. It has the ID 0x108b and type 0x0003 but the description is Neo CoolCam Unknown: type=0003, id=108b+. The switch functions work also in Domoticz V3.8441. But in my device overview I got 3 devices (switches). It looks like the first and second one are the same (when toggle them, I see the same button change) and the third is the other one. Does someone have the same switch and knows what's the difference is in the first 2 devices in Domoticz?
Hi, the device is supported by Domoticz, I myself added the corresponding xmls into openzwave a gizmocouz pulled this into domoticz 22 days ago :)

Solution: exclude it from your network, then include it again. Domoticz should recognize it then (I don't remember if it's in the latest stable, but pretty sure latest beta contains it).

Regarding the 3 switch thing: it's correct, there will be 3 switches where 2 are the same. Don't know why, but doesn't care :) I simply added the two correct switches and deleted the 3rd one.

User avatar
dk78
Posts: 31
Joined: Monday 07 March 2016 16:50
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Veldhoven
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by dk78 » Wednesday 27 September 2017 10:46

Thanks! Didn't know I have to exclude and include it again, but makes sense.

It did fix it!

User avatar
LouiS22
Posts: 488
Joined: Friday 27 February 2015 14:21
Target OS: Raspberry Pi
Domoticz version: beta
Location: Budapest, Hungary
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by LouiS22 » Wednesday 27 September 2017 10:59

dk78 wrote:
Wednesday 27 September 2017 10:46
Thanks! Didn't know I have to exclude and include it again, but makes sense. How do I do this with this device?
First, Start the exclusion with your z-wave device (you can do this from Domoticz's openzwave tab). As far as I remember, you have to press one of the switches for at least 10 seconds, the led will flash red once it's finished - also you can see at domoticz that the device was removed.

delfisastre
Posts: 11
Joined: Wednesday 05 October 2016 11:08
Target OS: Raspberry Pi
Domoticz version: 3.8153
Location: Catalonia, Barcelona
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by delfisastre » Wednesday 27 September 2017 11:06

I have one of this switch and works perfectly in my domoticz, ( Version: 3.8392) with RPI3.
Attachments
coolcam.JPG
coolcam.JPG (22.67 KiB) Viewed 1716 times

User avatar
dk78
Posts: 31
Joined: Monday 07 March 2016 16:50
Target OS: Raspberry Pi
Domoticz version: Beta
Location: Veldhoven
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by dk78 » Wednesday 27 September 2017 13:05

I've solved my problem. The switch has now the description: Neo CoolCam Wall Switch (2 channels)+

User avatar
Lange1975
Posts: 10
Joined: Tuesday 04 October 2016 22:19
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by Lange1975 » Friday 29 September 2017 6:06

Is this a item bought on AliExpress?

johanvandyck
Posts: 2
Joined: Sunday 12 February 2017 11:19
Target OS: Linux
Domoticz version:
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by johanvandyck » Friday 09 March 2018 17:34

Hi

Removing via Domoticz's openzwave tab and adding via Domoticz doesn't seem to work for me. The device is recognised and 3 switches are created, however no possebility to config the settings.
After reboot, my zwcfg_0xXXXXXXX.xls has an added neo device, but also here the name is "Unknown: type=0003, id=108b+"

I have to mention my Domo version is 3.8153 (latest prod) and I copied the ls02ch.xml manually from the github to <domo root>/Config/shenzen_neo.
I use a aeotec zwave gen5 usb stick.

Should I do other things. (I'll like to stay on the latest prod version and not go to the beta).

Regards

Johan.

mjaqb
Posts: 4
Joined: Sunday 22 October 2017 12:59
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by mjaqb » Wednesday 14 March 2018 1:22

I use this switch, but time to time domoticz don't update light state that was changed manually. What can be a problem?

edwindred
Posts: 17
Joined: Friday 27 May 2016 17:52
Target OS: -
Domoticz version:
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by edwindred » Friday 11 May 2018 13:40

johanvandyck wrote:
Friday 09 March 2018 17:34
Removing via Domoticz's openzwave tab and adding via Domoticz doesn't seem to work for me. The device is recognised and 3 switches are created, however no possebility to config the settings.
After reboot, my zwcfg_0xXXXXXXX.xls has an added neo device, but also here the name is "Unknown: type=0003, id=108b+"


Regards

Johan.
i have the same issue, the device is working but unable to get config from device and set parameter, i am also on: Version 3.8153 (July 30h 2017)
Did an exclude and include again , but that did not help
any suggestions?
control_ozw1.JPG
control_ozw1.JPG (50.18 KiB) Viewed 670 times
control_ozw3.JPG
control_ozw3.JPG (81.73 KiB) Viewed 670 times
Attachments
control_ozw2.JPG
control_ozw2.JPG (39.96 KiB) Viewed 670 times

edwindred
Posts: 17
Joined: Friday 27 May 2016 17:52
Target OS: -
Domoticz version:
Contact:

Re: Neo CoolCamlight switch: Unknown: type=0003, id=108b+

Post by edwindred » Monday 14 May 2018 18:22

Solution found.
the openzwave xmls are not completely up to date.
i found that adding one line in the manufacturer_specific.xml did the trick.

<Product type="0003" id="108d" name="Battery Powered PIR Sensor" config="shenzen_neo/nas-pd01z.xml"/>

And then excluded and include again. Now I am able to set parameters

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest