Kerui D026

Compatibility (hardware, devices and OS)
User avatar
EdddieN
Posts: 131
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 3.5877
Location: Scotland
Contact:

Re: Kerui D026

Post by EdddieN » Wednesday 28 June 2017 22:27

Hi,

I'm testing this one too, I have it recognised with RFXcom as Lighting4 sensor. However Domoticz shows them always as ON, but I can see on the logs that both, open and closed are received as:

Code: Select all

(RFX433) Lighting 4 (Unknown)
I have RFXtrx433E version with fw Type2/1017

Are you able to get it working as open closed?

denman091
Posts: 1
Joined: Monday 31 July 2017 15:22
Target OS: Raspberry Pi
Domoticz version: 3.8153
Contact:

Re: Kerui D026

Post by denman091 » Friday 11 August 2017 10:20

Hi Guys,

I'm a new domoticz user. I have a RFXCom433e with Ext2/1020 firmware.
I want a door sensor witch i can add as a single security device. Open and Closed. I read that de Kerui D026 is supported in version 1012 by rfxcom but witch one i should by?
https://www.aliexpress.com/item/433MHz- ... 40451.html?
Or:
https://www.aliexpress.com/item/D026-Wi ... 30002.html?

Or are these 2 identical?

iLLiac4
Posts: 13
Joined: Thursday 31 August 2017 8:13
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by iLLiac4 » Thursday 31 August 2017 8:18

I was testing D026 sensor with RFXTfx433E (1020) and if i enable only lightning4 protocol it receives open, close and temper signal but no battery status.
If i enable also x10 and lightning 4 protocol all three (open, close, temper) are sended as one signal, which is kind of not usefull.

Code: Select all

31. 08. 2017 08:16:34
Packettype    = Security1
subtype       = X10 security
Sequence nbr  = 1
id1-3         = 110D00 decimal:1117440
status        = Alarm + Tamper
battery level = OK
Signal level  = 8  -56dBm
Is this a normal behaviour?

b_weijenberg
Posts: 618
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Kerui D026

Post by b_weijenberg » Thursday 31 August 2017 8:23

Is the tamper switch closed?
What is received with X10 disabled?
RFXtrx433, RFXtrx433E

iLLiac4
Posts: 13
Joined: Thursday 31 August 2017 8:13
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by iLLiac4 » Thursday 31 August 2017 9:01

Hmm. Is seems that it is domotics bug. As it lists as only one status. Will investigate further.
Status in rfx is:
------------------------------------------------
31. 08. 2017 09:00:57
------------------------------------------------
31. 08. 2017 09:00:58
Packettype = Security1
subtype = X10 security
Sequence nbr = 0
id1-3 = 110D00 decimal:1117440
status = Normal
battery level = OK
Signal level = 8 -56dBm
------------------------------------------------
31. 08. 2017 09:01:01
------------------------------------------------
31. 08. 2017 09:01:01
Packettype = Security1
subtype = X10 security
Sequence nbr = 1
id1-3 = 110D00 decimal:1117440
status = Alarm
battery level = OK
Signal level = 8 -56dBm
------------------------------------------------
31. 08. 2017 09:01:03
------------------------------------------------
31. 08. 2017 09:01:03
Packettype = Security1
subtype = X10 security
Sequence nbr = 2
id1-3 = 110D00 decimal:1117440
status = Alarm + Tamper
battery level = OK
Signal level = 8 -56dBm

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests