Kerui D026

Compatibility (hardware, devices and OS)
robertje221
Posts: 10
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Kerui D026

Post by robertje221 » Friday 18 November 2016 9:19

Hello!

I am new to domoticz with an raspberry pi 3 and a RFXTRX433E

On aliexpress i bought some KERUI D026 door sensors
http://www.aliexpress.com/item/32590916 ... 16896.html


But they are not recognized by RFXTRX433E and Domoticz. Is there ant way to make them work?

b_weijenberg
Posts: 618
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Kerui D026

Post by b_weijenberg » Friday 18 November 2016 10:14

Check with RFXmngr on a Windows system and Lighting4 enabled
RFXtrx433, RFXtrx433E

robertje221
Posts: 10
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by robertje221 » Saturday 19 November 2016 13:33

Thank you for your reply! I checked today with RFXmngr with Lighting 4 enabled.

CLOSE

------------------------------------------------
------------------------------------------------
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 154
Code = 424087 decimal:4341895
S1- S24 = 0100 0010 0100 0000 1000 0111
Pulse = 317 usec
Signal level = 8 -56dBm



OPEN
------------------------------------------------
------------------------------------------------
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 155
Code = 42408E decimal:4341902
S1- S24 = 0100 0010 0100 0000 1000 1110
Pulse = 317 usec
Signal level = 8 -56dBm
------------------------------------------------
------------------------------------------------

robertje221
Posts: 10
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by robertje221 » Saturday 19 November 2016 13:34

PANIC

------------------------------------------------
------------------------------------------------
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 234
Code = 42408B decimal:4341899
S1- S24 = 0100 0010 0100 0000 1000 1011
Pulse = 315 usec
Signal level = 8 -56dBm
------------------------------------------------
------------------------------------------------

robertje221
Posts: 10
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by robertje221 » Sunday 20 November 2016 3:17

Is there a way to add thus sensor ?


Verzonden vanaf mijn iPhone met Tapatalk

josimd
Posts: 46
Joined: Saturday 09 January 2016 20:47
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by josimd » Friday 25 November 2016 21:14

I have also some Kerui D026 sensors and they working with Domoticz. I'm running SW version 1009, you can download it from the RFXcom website, you can only reload the firmware/SW version via the windows program (not via Domoticz). You have to selected lighting4 (modus instellen)... :-)

TacticalLeader
Posts: 9
Joined: Tuesday 19 January 2016 14:19
Target OS: Raspberry Pi
Domoticz version: latest
Location: Szeged, Hungary
Contact:

Re: Kerui D026

Post by TacticalLeader » Thursday 01 December 2016 21:05

robertje221 wrote:Is there a way to add thus sensor ?

Verzonden vanaf mijn iPhone met Tapatalk
Dear friend,

I bought a Kerui D026 sensor and I made it work with my RFLINK gateway as easy as 1-2-3. The only problem is that the ON means closed and OFF means opened, and I want to swap it but cannot find the solution.. But the sensor is working flawless!

robertje221
Posts: 10
Joined: Friday 18 November 2016 9:15
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by robertje221 » Monday 05 December 2016 18:00

Thanks for your reply. I know that these sensors are supported with the RFlink. But I have a RFXTRX433E / RFXCOM and i wonder if it is possible to make them work with that unit.


Verzonden vanaf mijn iPhone met Tapatalk

User avatar
Derik
Posts: 1802
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: Kerui D026

Post by Derik » Monday 05 December 2016 19:52

TacticalLeader wrote:
robertje221 wrote:Is there a way to add thus sensor ?

Verzonden vanaf mijn iPhone met Tapatalk
Dear friend,

I bought a Kerui D026 sensor and I made it work with my RFLINK gateway as easy as 1-2-3. The only problem is that the ON means closed and OFF means opened, and I want to swap it but cannot find the solution.. But the sensor is working flawless!
Make a Dummy
Make Blockley
When open cloe the the dummy
When close open the dummy..
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups

TacticalLeader
Posts: 9
Joined: Tuesday 19 January 2016 14:19
Target OS: Raspberry Pi
Domoticz version: latest
Location: Szeged, Hungary
Contact:

Re: Kerui D026

Post by TacticalLeader » Monday 05 December 2016 20:52

Derik wrote:
TacticalLeader wrote:
robertje221 wrote:Is there a way to add thus sensor ?

Verzonden vanaf mijn iPhone met Tapatalk
Dear friend,

I bought a Kerui D026 sensor and I made it work with my RFLINK gateway as easy as 1-2-3. The only problem is that the ON means closed and OFF means opened, and I want to swap it but cannot find the solution.. But the sensor is working flawless!
Make a Dummy
Make Blockley
When open cloe the the dummy
When close open the dummy..
I will have 17 dummys for reversing and 17*2 switches for nothing. It's not too elegant.

User avatar
Derik
Posts: 1802
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: Kerui D026

Post by Derik » Monday 05 December 2016 20:59

ok ....
Only it is a solution... [ did not now you have 17 contact.. ]
And Domoticz can run with the dummy no problem..
Think i do have 100+ dummy timer active etc etc ..
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups

TacticalLeader
Posts: 9
Joined: Tuesday 19 January 2016 14:19
Target OS: Raspberry Pi
Domoticz version: latest
Location: Szeged, Hungary
Contact:

Re: Kerui D026

Post by TacticalLeader » Monday 05 December 2016 21:13

Derik wrote:ok ....
Only it is a solution... [ did not now you have 17 contact.. ]
And Domoticz can run with the dummy no problem..
Think i do have 100+ dummy timer active etc etc ..
By the way, the solution is working and do the reversing. Maybe, if there will be a solution to hide selected switches or other devices :) Now the switches menu is crowded, like a christmas market.

b_weijenberg
Posts: 618
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Kerui D026

Post by b_weijenberg » Tuesday 06 December 2016 19:17

On request a beta version Ext2 (for the RFXtrx433E) is available. This firmware reports Kerui sensors as one security sensor.
RFXtrx433, RFXtrx433E

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by Melissen » Sunday 11 December 2016 19:18

Should this work with RFXcom433E (ver1011)? And does this one have ON and OFF switch? So I can see of the door is closed or opened?
It's not really Kerui, but does have the same D026 code.... Chinese sellers aren't always sincere in their ads.

https://www.aliexpress.com/item/High-gr ... 2167&tpp=1

Or should I go for a real Kerui D026?


UPDATE 23/12: Device works great... Gonna buy some more:)
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

buxol
Posts: 16
Joined: Saturday 02 January 2016 0:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by buxol » Tuesday 27 December 2016 12:42

Updated the firmware of my RFXcom433E to ver1012.
The Kerui D026 is now a proper security sensor with three states (normal, alarm and alarm+tamper).

Unfortunately only 3 of 5 identical Kerui D026 sensors are successfully added to Domoticz.
The other two won't even show up in the RFXcom manager log.
They do seem to work; the led blinks and signal sending is audible.
Any suggestions?

b_weijenberg
Posts: 618
Joined: Friday 12 July 2013 18:13
Target OS: -
Domoticz version:
Location: Netherlands
Contact:

Re: Kerui D026

Post by b_weijenberg » Tuesday 27 December 2016 12:44

Please contact support rfxcom.com as this is not a Domoticz problem!
RFXtrx433, RFXtrx433E

buxol
Posts: 16
Joined: Saturday 02 January 2016 0:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by buxol » Tuesday 27 December 2016 12:56

No need to shout. Thank you for your reply, I will contact support at rfxcom.

buxol
Posts: 16
Joined: Saturday 02 January 2016 0:21
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Kerui D026

Post by buxol » Tuesday 27 December 2016 17:23

The two sensors are indeed working. I have collected undecoded ARC for both sensors and contacted RFXcom with the information.

josimd
Posts: 46
Joined: Saturday 09 January 2016 20:47
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by josimd » Thursday 29 December 2016 14:28

Hi Boxel, also I have some Kerui, 4 units are not responding in RFXcom, how did you manage to get them working?

Melissen
Posts: 41
Joined: Wednesday 16 November 2016 10:39
Target OS: -
Domoticz version:
Contact:

Re: Kerui D026

Post by Melissen » Thursday 12 January 2017 19:14

Hi,

Problem with the Kerui sensors is: the look the same, but they have different protocols.
Also if you have Rubicson enabled, the most sensors won't respond.

They are working on a fix (new firmware), but it's not perfect yet.

At least, I've got mine working with a lot of support. (thx Bert)
RFXcom433e ver1009,Raspberry Pi,Domoticz v3.5877

KaKu:16c remote,dimmer,wall-sockets,sunscreenswitch
Promax:wall sockets Elro:wall sockets Somfy:RFY screens
TFA:weather station Chinese temperature sensors, smoke detectors, power switches

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests