Danalock V2 Circle howto

Compatibility (hardware, devices and OS)
Post Reply
Hanfelt
Posts: 4
Joined: Tuesday 29 March 2016 14:30
Target OS: Raspberry Pi
Domoticz version:
Contact:

Danalock V2 Circle howto

Post by Hanfelt » Tuesday 29 March 2016 14:40

Code: Select all

 
 <Manufacturer id="010e" name="Polycontrol">
                <Product type="0002" id="0001" name="Danalock Keypad" config="polycontrol/keypad.xml"/>
                <Product type="0003" id="0002" name="Danalock Circle/Square" config="polycontrol/doorlock.xml"/>
                <Product type="0001" id="0001" name="Polylock" config="polycontrol/polylock.xml"/>
                <Product type="0008" id="0002" name="Danalock Circle/Square" config="polycontrol/doorlock.xml"/> 
 </Manufacturer>
First i edited manufacturer_specific.xml under domoticz/Config and added the line: <Product type="0008" id="0002" name="Danalock Circle/Square" config="polycontrol/doorlock.xml"/>

Then i include the Danalock with include secure node.
Skärmklipp.PNG
Skärmklipp.PNG (51.73 KiB) Viewed 1964 times
I didnt change the switch to a door lock because its inversed so i decided to go with regular light switch and upload a new icon template instead.
Skärmklipp.PNG
Skärmklipp.PNG (21.61 KiB) Viewed 1964 times
Danalock.zip
(2.87 KiB) Downloaded 94 times

hvb83
Posts: 9
Joined: Tuesday 04 November 2014 14:02
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Danalock V2 Circle howto

Post by hvb83 » Sunday 03 April 2016 11:23

Thanks for the how-to. What is your experience with this lock so far? The previous version did rather bad in all reviews, but this one is said to be much better.

User avatar
Derik
Posts: 1862
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: Danalock V2 Circle howto

Post by Derik » Sunday 03 April 2016 17:10

Perhaps this send to openzwave...
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups

smedberg
Posts: 7
Joined: Sunday 08 January 2017 16:31
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Danalock V2 Circle howto

Post by smedberg » Sunday 08 January 2017 16:47

Has anyone got the inverted status problem solved?

losholmen
Posts: 3
Joined: Saturday 14 January 2017 17:38
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Danalock V2 Circle howto

Post by losholmen » Saturday 14 January 2017 17:47

Hi Hanfelt
Iam
I'm new and need a step by step instruction how I add Dana Lock in domoticz. I have managed to include it in the Z-Wave stick. and can see that the hardware tab. But it is not in units. Can you help me with an instruction for dummies?

NStafford
Posts: 6
Joined: Tuesday 14 February 2017 0:32
Target OS: -
Domoticz version:
Contact:

Re: Danalock V2 Circle howto

Post by NStafford » Tuesday 21 February 2017 2:19

How is the hardware of the lock so far?

I always have an issue with weak motors not being able to overcome issues with misaligned doors. (And the issues with doors is they are always falling out of alignment).

Any issue with a false lock or unlock readings? Full extension without catching on the strike, or semi-extended bolts?

PABben
Posts: 80
Joined: Friday 31 January 2014 15:32
Target OS: Windows
Domoticz version:
Location: Norway
Contact:

Re: Danalock V2 Circle howto

Post by PABben » Tuesday 28 February 2017 17:27

Hardware seems to be fine, but poor bluetooth. Been using my lock for 6 months.

Had problems with timeout from z-wave. Ended up doing a har reset of controller and now it's working.

Their customer service is sh** though. They only ansver if there is an easy ansver. I even got banned by asking gently about how to activate async without z-wave.

bjacobse
Posts: 44
Joined: Tuesday 06 September 2016 9:08
Target OS: Raspberry Pi
Domoticz version:
Location: Bunkeflostrand, SE
Contact:

Re: Danalock V2 Circle howto

Post by bjacobse » Sunday 23 July 2017 21:30

I have an Aeon zwave usb stik S2 with latest firmware 3.08 and I'm not able to make an inclusion to my Danalock V2 circle - anyone have successfully done this with this Aeon S2 usb stick?
Regardless if I set via Domoticz, OpenZwave control panel-> inclusion secure and press and hold the button until 2 beeps sounds and then release, or if I use the Android app adn try to connect zwave through this. Physical distance between those were 20cm. nothing happens and I wonder if it's because the Aeon zwave USB S2 stick is using an older chip generation, and the Danalock v2 using Gen 5 and somehow isn't backwards compatible?

smedberg
Posts: 7
Joined: Sunday 08 January 2017 16:31
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Danalock V2 Circle howto

Post by smedberg » Sunday 23 July 2017 21:44

I'm using a Aeon z-stick gen5. Are you sure you have the z-wave enabled model of the lock? I made the mistake and bought the wrong version first. :)

bjacobse
Posts: 44
Joined: Tuesday 06 September 2016 9:08
Target OS: Raspberry Pi
Domoticz version:
Location: Bunkeflostrand, SE
Contact:

Re: Danalock V2 Circle howto

Post by bjacobse » Thursday 27 July 2017 22:56

Thanks Smedberg,
How do you check the Danalock V2 circle if it's only BT or BT & zwave?

smedberg
Posts: 7
Joined: Sunday 08 January 2017 16:31
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Danalock V2 Circle howto

Post by smedberg » Thursday 27 July 2017 23:17

I got this from support
" Is your lock z-wave compatible? ( if you take the top lid off, there should be a letter E on a small chip)"

I think you have to have the square board with eu+ , see the image below.

Image

bjacobse
Posts: 44
Joined: Tuesday 06 September 2016 9:08
Target OS: Raspberry Pi
Domoticz version:
Location: Bunkeflostrand, SE
Contact:

Re: Danalock V2 Circle howto

Post by bjacobse » Saturday 29 July 2017 16:27

Thank you once again Smedberg, now I understand why my Danalock V2 isn't working with Z-wave at all
Apparently the lock I bought in Bauhus.se is without Zwave and only BT:-(
Danalock_v2_BT_only.png
Danalock_v2_BT_only.png (379.99 KiB) Viewed 689 times

bjacobse
Posts: 44
Joined: Tuesday 06 September 2016 9:08
Target OS: Raspberry Pi
Domoticz version:
Location: Bunkeflostrand, SE
Contact:

Re: Danalock V2 Circle howto

Post by bjacobse » Monday 31 July 2017 14:49

I talked to the nice Danalock support, and they would upgrade my PCB, so that I also will get Zwave in my danalock V2

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests