RFlink doesn't detect divices

Post Reply
mwmaster
Posts: 4
Joined: Sunday 15 October 2017 21:22
Target OS: Raspberry Pi
Domoticz version:
Contact:

RFlink doesn't detect divices

Post by mwmaster » Sunday 15 October 2017 21:49

Hi every one,

I recently bought a arduino mega connected my rf tranciver.
Installed the software on the arduino, checked if the setup worked on my laptop (it does).
After installation I connected the arduino to my raspberry and tried to learn my devices in domoticz.

Nothing happened....
Checked my logs:
After connecting it showed the RF link version
And received pongs from my RF link
No errors so far...

2017-10-15 21:41:20.495 RFLink: 20;8D;PONG;
2017-10-15 21:42:10.870 RFLink: 20;8E;PONG;
2017-10-15 21:43:00.816 RFLink: 20;8F;PONG;
2017-10-15 21:43:50.777 RFLink: 20;90;PONG;


I have a raspberry pi 2
I run domoticz version 3.8590
RFlink version 47
433 mHz devices impuls, pro max

Can anyone tell me what I'm doing wrong :?

User avatar
Stuntteam
Posts: 437
Joined: Wednesday 06 May 2015 16:39
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RFlink doesn't detect divices

Post by Stuntteam » Sunday 15 October 2017 22:02

Are your devices actually supported?
Check with rflink loader is you are receiving any devices.
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic RFLink Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

HFman
Posts: 37
Joined: Thursday 02 March 2017 21:28
Target OS: Linux
Domoticz version: 3.6635
Contact:

Re: RFlink doesn't detect divices

Post by HFman » Sunday 15 October 2017 22:05

Just to be sure.. you allowed domoticz to add/see new sensors ? (Settings -> System -> Hardware/Devices) ?
Raspberry PI 2 - Opentherm Gateway + ESP8826 - EvoHome - ESPEasy - RF-Link -

mwmaster
Posts: 4
Joined: Sunday 15 October 2017 21:22
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RFlink doesn't detect divices

Post by mwmaster » Sunday 15 October 2017 22:41

Stuntteam wrote:
Sunday 15 October 2017 22:02
Are your devices actually supported?
Check with rflink loader is you are receiving any devices.
devices are supported, i recive signals if i connect the arduino to my laptop.

mwmaster
Posts: 4
Joined: Sunday 15 October 2017 21:22
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: RFlink doesn't detect divices

Post by mwmaster » Sunday 15 October 2017 22:43

HFman wrote:
Sunday 15 October 2017 22:05
Just to be sure.. you allowed domoticz to add/see new sensors ? (Settings -> System -> Hardware/Devices) ?
all ready checkt, ;)

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 2 guests