Search found 366 matches

by b_weijenberg
Thursday 22 February 2018 16:06
Forum: General Discussion
Topic: rfcom stopped working
Replies: 4
Views: 98

Re: rfcom stopped working

A firmware update is not a solution.
Please check the RFXtrx433E with RFXmngr on a Windows system.
by b_weijenberg
Thursday 22 February 2018 12:48
Forum: General Discussion
Topic: rfcom stopped working
Replies: 4
Views: 98

Re: rfcom stopped working

In most cases this is due to a frozen FTDI USB interface. This can happen by a voltage dip or spike on the USB interface. Solutions can be: - A shorter USB cable (but keep the RFXtrx433E away from PC, modem, RPI etc..) - Keep the USB cable away from power cables. - Use a USB hub with a good quality ...
by b_weijenberg
Wednesday 21 February 2018 10:51
Forum: Rfxcom Transceiver
Topic: Increase robustnes in a Rfxcom433 and Nexa combo
Replies: 6
Views: 110

Re: Increase robustnes in a Rfxcom433 and Nexa combo

The RFXCOM transmits a limited number of RF packets. Is the Nexa remote always working if you push the OFF button for max 0.5 seconds?
by b_weijenberg
Sunday 18 February 2018 15:37
Forum: Rfxcom Transceiver
Topic: Increase robustnes in a Rfxcom433 and Nexa combo
Replies: 6
Views: 110

Re: Increase robustnes in a Rfxcom433 and Nexa combo

If switch ON operates but OFF doesn't it is in most cases the device connected to the NEXA module that produces RF noise, for example a LED light.
You can try to increase the RF signal of the RFXtrx433E a little bit. Search on ebay or aliexpress for "3dBi magnetic antenna" 433MHz
by b_weijenberg
Friday 09 February 2018 16:38
Forum: Compatibility
Topic: Compatible Smoke detectors
Replies: 46
Views: 15475

Re: Compatible Smoke detectors

The RM174 is received by the RFXtrx433E with Ext2 firmware and ARC enabled.
by b_weijenberg
Thursday 25 January 2018 22:23
Forum: Meters
Topic: Revolt NC5461
Replies: 6
Views: 334

Re: Revolt NC5461

Are all 4 sensors received in RFXmngr?
Note that the revolt transmits very often and can disturb other sensor packets also other sensors than Revolt.
by b_weijenberg
Thursday 25 January 2018 10:25
Forum: Meters
Topic: Revolt NC5461
Replies: 6
Views: 334

Re: Revolt NC5461

There is no problem to use any of the firmware types Type1, Type2, Ext or Ext2 in the RFXtrx433E.
See also the remark in the firmware zip files on the RFXCOM Downloads page
by b_weijenberg
Tuesday 23 January 2018 0:20
Forum: Meters
Topic: Revolt NC5461
Replies: 6
Views: 334

Re: Revolt NC5461

please test with RFXmngr with only RSL enabled and use Type2 firmware (see chapter 2.2.2 in the RFXtrx User Guide)
by b_weijenberg
Friday 19 January 2018 10:49
Forum: Other questions and discussions
Topic: Most compatible 433mhz hardware???
Replies: 3
Views: 283

Re: Most compatible 433mhz hardware???

It looks the same as the supported Aidebao security beam
https://aidebao.en.alibaba.com/product/ ... ector.html

Check with RFXmngr with only Meiantech/Atlantic enabled.

Or contact support rfxcom.com
by b_weijenberg
Sunday 14 January 2018 17:52
Forum: General Discussion
Topic: 433mhz Doorbell - not found?
Replies: 3
Views: 309

Re: 433mhz Doorbell - not found?

I suppose this doorbell is not supported.
Please see chapter 2 in the RFXtrx User Guide for the list of supported devices.
by b_weijenberg
Wednesday 10 January 2018 17:41
Forum: Compatibility
Topic: Low cost window/door sensor
Replies: 280
Views: 72753

Re: Low cost window/door sensor

The Kerui D026 is supported, enable Lighting4 + X10 and the sensor is received as X10 security sensor.
https://www.aliexpress.com/item/6pcs-lo ... 26744.html
by b_weijenberg
Tuesday 09 January 2018 10:09
Forum: Compatibility
Topic: New RFXcom device to Domoticz
Replies: 10
Views: 2091

Re: New RFXcom device to Domoticz

Kangtai is controlled by Lighting5 - Kangtai, Cotech in RFXmngr.
I guess you need to receive the remote to create the Kangtai device in Domoticz. Enable receive of new devices in Domoticz and try with only Lighting4 + AC enabled.
by b_weijenberg
Wednesday 03 January 2018 10:43
Forum: ESP8266
Topic: SONOFF RF 433
Replies: 4
Views: 481

Re: SONOFF RF 433

Add a Lighting4 device using the sonoff remote,
See also chapter 14.5 in the RFXtrx User Guide.
by b_weijenberg
Wednesday 27 December 2017 20:32
Forum: Bugs and Problems
Topic: Adding a Dooya curtain motor
Replies: 18
Views: 2941

Re: Adding a Dooya curtain motor

Did you follow the instructions in chapter 10 with RFXmngr??
Which motor and remote type?
by b_weijenberg
Wednesday 27 December 2017 19:28
Forum: Bugs and Problems
Topic: Adding a Dooya curtain motor
Replies: 18
Views: 2941

Re: Adding a Dooya curtain motor

Dooya receive is not implemented and you you need to enable a protocol.
Create the BlindsT6 device in Domoticz and pair this with the Dooya motor.
See also chapter 10 in the RFXtrx User Guide.
by b_weijenberg
Tuesday 19 December 2017 17:40
Forum: Rfxcom Transceiver
Topic: Sockets Signal transmit/learn and store?
Replies: 2
Views: 271

Re: Sockets Signal transmit/learn and store?

Enable the AC protocol if the Intertechno is a self learning type or the ARC protocol if it is the type with code wheels. Click the "Allow for 5 Minutes" button in the Setup-Settings menu at "Accept new Hardware Devices" Transmit an Intertechno command. The device should show up in the Setup-devices...
by b_weijenberg
Saturday 16 December 2017 12:19
Forum: Bugs and Problems
Topic: TEMP_HUM sensors not recognized
Replies: 2
Views: 266

Re: TEMP_HUM sensors not recognized

Maybe RF interference of the RPI.
Place the RFXtrx433E antenna not close to the RPI (use the full USB cable length)
Use a good quality power supply o the RPI.
Check with only Hideki enabled in Domoticz.
Check with RFXmngr at the same location as used on the RPI.
by b_weijenberg
Thursday 07 December 2017 10:48
Forum: Bugs and Problems
Topic: [SOLVED] Domoticz + RFXCOM - temperature not updating
Replies: 5
Views: 339

Re: Domoticz + RFXCOM - temperature not updating

1 You have the same protocols enabled in Domoticz as used in RFXmngr?
2 The RFXtrx433E was on the same location with both tests?
by b_weijenberg
Saturday 25 November 2017 11:49
Forum: Bugs and Problems
Topic: [SOLVED] Domoticz + RFXCOM - can't learn switches
Replies: 5
Views: 518

Re: Domoticz + RFXCOM - can't learn switches

I sent you a PM
by b_weijenberg
Friday 24 November 2017 22:33
Forum: Rfxcom Transceiver
Topic: KERUI P829 Motion sensor
Replies: 5
Views: 959

Re: KERUI P829 Motion sensor

Enable also lighting4