Search found 53 matches

by Ron
Saturday 15 September 2018 16:20
Forum: Other questions and discussions
Topic: Zwave or klikaanklikuit sensor to read existing PIR
Replies: 1
Views: 149

Re: Zwave or klikaanklikuit sensor to read existing PIR

I think you can use the Fibaro binairy sensor for that.
I use them to build in a PIR sensor to transfer the status via Zwave to Domoticz.
by Ron
Friday 31 August 2018 10:43
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

Our new house is in the northern region of Den Bosch, Bokhoven.
by Ron
Wednesday 29 August 2018 20:19
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

I returned the OTGW to the Nodo shop and they replaced the voltage regulator. Now i have the new version, and i expect it will work as it should. As we just bought a new (beatiful old) house, i cannot test the gateway while the Nefit Excellent heating has no OT connection. When i have time enough i ...
by Ron
Monday 09 July 2018 9:02
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

The gateway is more stable now with the new changes. Just looked at the Nodo shop and it is clearly to see that the voltage regulator has been changed now to a step down converter. My conclusions were right, otherwise they didn't have to change this. Than i did some more research, and found this: ht...
by Ron
Sunday 08 July 2018 14:02
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

20180708_131320 [1024x768].jpg
20180708_131320 [1024x768].jpg (180.79 KiB) Viewed 1071 times
20180708_130914 [1024x768].jpg
20180708_130914 [1024x768].jpg (181.04 KiB) Viewed 1071 times
by Ron
Sunday 08 July 2018 14:00
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

Yesterday i modified the OTGW and casing. First i soldered a heatsink directly on the L7805 voltage regulator, as this is the component which get way to hot. Secondly i drilled som extra holes directly above the mounted heatsink, next to the already drilled holes i made. At third i dropped the power...
by Ron
Sunday 24 June 2018 13:27
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

Last weeks i had many problems regarding lost connection/no display on thermostat. This always happend at warm days en i suppose the circuit board or one or more components get to hot. As a solution i drlled many holes in the side and on the top side of the acrylic casing but that didn't help a lot....
by Ron
Friday 09 March 2018 8:02
Forum: OpenTherm gateway
Topic: experience with the OTGW from NODO-shop?
Replies: 50
Views: 8235

Re: experience with the OTGW from NODO-shop?

I am using the Nodo shop OTG now for a few days and it works fine.
Soldering was easy (expert) and following the instructions it worked right away.
I used the transparant casing and the wifi module. Looks great.
by Ron
Friday 09 March 2018 6:33
Forum: OpenTherm gateway
Topic: Problems with controlling the setpoint
Replies: 2
Views: 1319

Re: Problems with controlling the setpoint

I found out that only 1 degree settings works, not 0,5 degree. So if the roomtemperature setting is 20 degree i can not change it to 20,5 (I can but it doesn't work) but changing it to 21 works fine. Also you have to be patiënt, of takes some time untill the thermostat shows the changed temperature....
by Ron
Thursday 08 March 2018 1:42
Forum: OpenTherm gateway
Topic: MAX_CH Water Setpoint
Replies: 7
Views: 2417

Re: MAX_CH Water Setpoint

If you need any help Jake, i am the technical specialist at Jaga Nederland :-).
(HVAC and electronics)
by Ron
Tuesday 10 October 2017 23:28
Forum: Z-Wave
Topic: New Qubino Z-Wave+ dimmer ZMNHDD1 now available
Replies: 13
Views: 5242

Re: New Qubino Z-Wave+ dimmer ZMNHDD1 now available

I added two new ZMNHDD1 devices and excluded and re-included three others succesfully as discribed.
They all work perfectly now, and the "older" re-included ones are fully configurably now.
Before they worked, but there were no options to configur them.

Thanks!
by Ron
Tuesday 26 September 2017 12:45
Forum: Deals & bargains
Topic: Qubino sale from 18-09 till 24-09
Replies: 5
Views: 2049

Re: Qubino sale from 18-09 till 24-09

To late, i just received the two dimmers on my desk :-)
by Ron
Monday 25 September 2017 15:01
Forum: Deals & bargains
Topic: Qubino sale from 18-09 till 24-09
Replies: 5
Views: 2049

Re: Qubino sale from 18-09 till 24-09

Is it stil possible to order 2 Qubino modules today?
by Ron
Thursday 14 September 2017 21:54
Forum: Bugs and Problems
Topic: Lost switches on Dashboard and Switches tab
Replies: 12
Views: 1118

Re: Lost switches on Dashboard and Switches tab

Thanks for helping me, for sure!
The problem is that switches dissapear on my screen at the switches and at the dashboard tab when all rooms are shown at once.
If you select only one of the rooms, and ofcourse the room in where the switch is located the switches show up again.
by Ron
Thursday 14 September 2017 7:18
Forum: Bugs and Problems
Topic: Lost switches on Dashboard and Switches tab
Replies: 12
Views: 1118

Re: Lost switches on Dashboard and Switches tab

I know how it works, i think you didn't understand the question.
by Ron
Wednesday 13 September 2017 23:24
Forum: Bugs and Problems
Topic: Lost switches on Dashboard and Switches tab
Replies: 12
Views: 1118

Lost switches on Dashboard and Switches tab

Version: V2.3530 Platform: Raspberry Pi Plugin/Hardware: RFXtrx433 USB, Aeotec Z-Stick S2 Description: Lost switches on dashboard and Switches tab I have no idea how long this has been wrong, but at some point some of the switches disappeared of the Switches and Dashboard tab. In case i select a roo...
by Ron
Saturday 02 September 2017 7:44
Forum: Switches and Scenes
Topic: How can I use a KAKU remote AYCT-102 to dim Fibaro dimmer 2?
Replies: 6
Views: 1284

Re: How can I use a KAKU remote AYCT-102 to dim Fibaro dimmer 2?

Can you post a screenprint of your Blocky event?
by Ron
Tuesday 04 July 2017 23:21
Forum: Android
Topic: Android App can’t reach domoticz server from web. (not a port forwarding issue)
Replies: 8
Views: 5468

Re: Android App can’t reach domoticz server from web. (not a port forwarding issue)

I must say that the server settings in this Android app are not quit logical, or even simple to understand.
The best word i think is confusing, these settings should be made better.
by Ron
Tuesday 04 July 2017 23:16
Forum: Blockly
Topic: Blocky event stil active after deletion?
Replies: 6
Views: 1207

Re: Blocky event stil active after deletion?

Raspberry Pi, Domoticz version V2.3530
(haven't seen any updates after this one)
by Ron
Tuesday 04 July 2017 6:19
Forum: Blockly
Topic: Blocky event stil active after deletion?
Replies: 6
Views: 1207

Re: Blocky event stil active after deletion?

Yes, i did.
You can also see the unwanted on state is always 93% and not 99% as programmed in the active Blocky event.