Search found 43 matches

by ubfssF
Saturday 17 June 2017 23:01
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

Nice. Not only the Algrabridge, but when garbage is collected. Could you please share the code for that? My code is still a bit messy, so here is the whole lot. look for "afval" in the code to find the relevant bits for the garbage info. <!DOCTYPE html> <html lang="en"> <head> <style type "text/css...
by ubfssF
Tuesday 13 June 2017 21:11
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

Just thought i'd share my frontpage. The information about the next garbage pickup is grabbed from the (dutch) afvalwijzer.nl site. And i think switches which state On or Off in big letter are not informative enough. So i swap the vdata and desc element, and make the button text yellow when on and ...
by ubfssF
Monday 08 May 2017 19:31
Forum: Bugs and Problems
Topic: ThermoSmart error login
Replies: 4
Views: 685

Re: ThermoSmart error login

As far as I can see every morning at 01:35 the login-errors starts. At 01:39 it works again. So, not a real problem?
by ubfssF
Saturday 25 March 2017 16:10
Forum: Lights and Switches
Topic: Set temperature with virtual button for smartwares 433 thermostat valve
Replies: 13
Views: 1482

Re: Set temperature with virtual button for smartwares 433 thermostat valve

@K3rryBlue: haha, the Smartvalves are definitely not the sharpest knives in the kitchen. I might switch to Danfoss valves, but I then have to add Zwave to my setup first. For the moment the Smartvalves are just good enough, also because I only need "wide open" and "fully closed". Controlling room te...
by ubfssF
Saturday 25 March 2017 8:25
Forum: Lights and Switches
Topic: Set temperature with virtual button for smartwares 433 thermostat valve
Replies: 13
Views: 1482

Re: Set temperature with virtual button for smartwares 433 thermostat valve

See the thread in Heating and cooling about these valves for experiences! Mine are not too bad. I have 5 and I use Eneloop pro batteries to power them (charging every 3 months). When batteries are low, they don't open or close anymore, but don't give a warning (still a normal display). They are a bi...
by ubfssF
Monday 20 February 2017 22:17
Forum: Heating/cooling
Topic: Smartwares introduces 433 thermostat valve
Replies: 80
Views: 24433

Re: Smartwares introduces 433 thermostat valve

Hello, I received it today and ... yes, it is noisy. Too much for me to put it in a bedroom, I will not say it is suitable for a bedroom. Fairly tested until now, I could say remote is only to put the device in Day or Night mode (and progrmmation is on the device itself for the temperature of night...
by ubfssF
Monday 20 February 2017 22:12
Forum: Heating/cooling
Topic: Smartwares introduces 433 thermostat valve
Replies: 80
Views: 24433

Re: Smartwares introduces 433 thermostat valve

If it isn't getting warmer than 26-27°C in that cabinet you could just set them to 28 when you want them open and on 4 if you want them closed. Understood. But in my case I would want to be able to set it to half open, or 1/3 or 3/4, regardless of what temp the thermostat measures. I guess setting ...
by ubfssF
Monday 20 February 2017 22:05
Forum: Heating/cooling
Topic: Smartwares introduces 433 thermostat valve
Replies: 80
Views: 24433

Re: Smartwares introduces 433 thermostat valve

Hello, For a while now i have 2 of these thermostat's and they work good to me. But the issue i have is that when i turn them off it seems like the next switch-command take 5-10 seconds to complete. I mean when i press the "away" switch, it turn of 1 or 2 lights, then the thermostat-valve, then not...
by ubfssF
Tuesday 14 February 2017 23:29
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

Right.. Has anyone succeeded with displaying a group? I have entered the group into the roomplan, and added the line below to frontpage_settings.js: ['1','Status', 'cell11', 'Licht Beneden','1','0'], The IDX is correct for sure.. But, the cell in Chrome stays empty. When I inspect the element, I ge...
by ubfssF
Saturday 28 January 2017 14:12
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

I suspect Buienradar also for the slow loading, but an hour is way too much. I have a Ubuntu setup, so I don't know the pitfalls of a Synology setup, but I suspect that Frontpage isn't able to reach the Domoticz server. The IP address or port number are the first to think of, but maybe with a Synolo...
by ubfssF
Friday 27 January 2017 23:58
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

Floorplan 0 will do for starting. Later on, you can create one specially for the Frontpage.
IP address of the domoticz server has to be right.
If you have at least one sensor configured, you should see something.
Page loads slowly, but if configured right it should work.
by ubfssF
Monday 23 January 2017 16:38
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

To answer my own question... :D

I had to look up the available datafields, for example in: http://127.0.0.1:8080/json.htm?type=devices&plan=0
There it was clear that I needed the contents of "Data":

So the right line is:

Code: Select all

['181','Data',          'cell8',        'Alblasserdam-Gorinchem','1','0'],
by ubfssF
Monday 23 January 2017 11:46
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

I am using the frontpage-version by Swordfish, which is based on the frontpage of this thread, just some tweaks to cell colors etc. What I cannot achieve is displaying travel times in the frontpage. When I browse the Domoticz database I can see the custom sensor (ID=181) and its value (sValue=12), b...
by ubfssF
Saturday 21 January 2017 19:30
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

OK, you probably mean to run apache or nginx then. I see
by ubfssF
Sunday 15 January 2017 18:15
Forum: Heating/cooling
Topic: Smartwares introduces 433 thermostat valve
Replies: 80
Views: 24433

Re: Smartwares introduces 433 thermostat valve

A short post about the battery usage. I started using Lithium batteries (brand Eve), but I also had one valve equipped with Panasonic Eneloop pro rechargeable batteries. Conclusion: both work for 3 months (depending a bit on the location of the the valve. Some valves have more work to do during the ...
by ubfssF
Saturday 14 January 2017 18:36
Forum: Design, usability and languages
Topic: NEW frontpage.html - request comments
Replies: 1261
Views: 239193

Re: NEW frontpage.html - request comments

A question before I install this frontpage: will it be visible from the outside world? I use Domoticz with a port forwarding in my router (with SSL) to port 443 to the Domoticz-PC and the built-in webserver is serving the Domoticz pages. I have the basic authentication "on", so that only with a pass...
by ubfssF
Tuesday 03 January 2017 11:36
Forum: Other questions and discussions
Topic: Tablet + Domoticz
Replies: 9
Views: 1779

Re: Tablet + Domoticz

I use my Wetab tablet PC for Domoticz, purely because because it was collecting dust. There is no real advantage in using a tablet, Ican say after a year. After installing Ubuntu I used remote access with SSH. One could use the tablet wall-mounted for displaying a Frontpage, or the standard Domoticz...
by ubfssF
Sunday 25 December 2016 15:52
Forum: Bugs and Problems
Topic: Permission for using port 443 for Domoticz
Replies: 4
Views: 1062

Re: Permission for using port 443 for Domoticz

I found it. What works, is using the full path of authbind in the systemd configuration file, which is /etc/systemd/system/domoticz.service for Ubuntu: [Unit] Description=domoticz_service [Service] User=domoticz Group=domoticz ExecStart=/usr/bin/authbind –deep /home/domoticz/domoticz/domoticz -www 8...
by ubfssF
Saturday 24 December 2016 23:42
Forum: Others
Topic: SolarEdge api
Replies: 28
Views: 5136

Re: SolarEdge api

Hi, I also have the same issue. I can make successful REST request manually. But Domoticz just starts and nothing more is shown. /Xter Same for me. Requesting data by giving in Site-id, Ser-nr and API-key works in browser. In Domoticz no new devices during 5 minutes. The log states that the worker ...
by ubfssF
Monday 19 December 2016 19:33
Forum: Bugs and Problems
Topic: Permission for using port 443 for Domoticz
Replies: 4
Views: 1062

Permission for using port 443 for Domoticz

I did a new install on the pc that runs Domoticz, with Ubuntu 16.04 (while before I was using 14.04). I compiled Domoticz (3.6179) and restored the database. Everything went well (except for the python scripts t, but that is a different story). I decided not to use nginx as a reverse proxy, but to t...