Search found 14 matches

by cato
Monday 09 July 2018 12:37
Forum: News & Updates
Topic: Domoticz version 4.9700 released (Stable)
Replies: 185
Views: 42141

Re: Domoticz version 4.9700 released (Stable)

After upgrade my system dosnt work anymore. I was running the stable version on my Rpi2 Wheezy. Now i get: domoticz: error while loading shared libraries: libudev.so.1: cannot open shared object file: No such file or directory Same problem here from an updated Wheezy. Domoticz does not start. Appar...
by cato
Wednesday 28 December 2016 12:51
Forum: Camera's
Topic: CGI commands for motion detection on Foscam cameras
Replies: 1
Views: 1986

CGI commands for motion detection on Foscam cameras

I use a virtual switch in domoticz to turn on and off motion detection on a FOSCAM FI8910W using a simple CGI command as ON action for the switch: http://IPADDRESS:PORT/set_alarm.cgi?mot ... d=PASSWORD This simple command does not work on the new models that I have (FI9831P and FI9828P but I guess t...
by cato
Monday 26 December 2016 19:55
Forum: PHP and all others
Topic: Script to toggle motion detection alarm on new FOSCAM's
Replies: 1
Views: 1117

Script to toggle motion detection alarm on new FOSCAM's

I use a virtual switch in domoticz to turn on and off motion detection on a FOSCAM FI8910W using a simple CGI command as ON action for the switch: http://IPADDRESS:PORT/set_alarm.cgi?motion_armed=1&user=USERNAME&pwd=PASSWORD This simple command does not work on the new models that I have (FI9831P an...
by cato
Wednesday 30 November 2016 14:47
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: Connecting to Domoticz behind non public IP - More than one
Replies: 15
Views: 5644

Re: Connecting to Domoticz behind non public IP - More than one

I answer myself in case others may have the same problem.
What was missing was editing sshd_config file in the myPublicIP-Pi machine to insert the option
'GatewayPorts yes'
This way the tunnel can be used also from other machines that can reach myPublicIP-Pi:8081
by cato
Monday 21 November 2016 19:29
Forum: Z-Wave
Topic: Howto use StellaZ in Domoticz? SetPoints...
Replies: 53
Views: 9358

Re: Howto use StellaZ in Domoticz? & Thermostat mode

As a late followup to my post above, I solved all those issues ... the reason the JSON commands were not working was due to the fact I needed to add username and password. After doing that the virtual switch was working fine. Now when you update to the new version of domoticz a new Thermostat Mode d...
by cato
Saturday 19 November 2016 9:36
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: Connecting to Domoticz behind non public IP - More than one
Replies: 15
Views: 5644

Re: Connecting to Domoticz behind non public IP - More than one

Sneezydevil, thank you for confirming I can still use the port locally. However I have some problems setting up the reverse tunnel: I use on Pi3g (this is the Pi without public IP that is running domoticz exposing it to local port 8080) ssh -R 8081:localhost:8080 me@myPublicIP-Pi -p222 (myPublicIP-P...
by cato
Thursday 17 November 2016 15:00
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: Connecting to Domoticz behind non public IP - More than one
Replies: 15
Views: 5644

Re: Connecting to Domoticz behind non public IP - More than one

Thank you for the pointer Tony, but I would prefer keeping my data on hosts that I control. Despite the https network connections, with mydomoticz the data is going to an intermediate server administered by a third party. I will look more into the security issues of that solution but I would also li...
by cato
Wednesday 16 November 2016 18:46
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: Connecting to Domoticz behind non public IP - More than one
Replies: 15
Views: 5644

Re: Connecting to Domoticz behind non public IP - More than one

I need to do a similar setup since I have a raspberry+domoticz with a 3G connection (no public IP), hence I cannot connect from outside the LAN. I am planning to do a ssh reverse tunnel from this raspberry to another one that has a public IP. Suppose the one in the 3G network is Pi-A and the other P...
by cato
Saturday 02 January 2016 17:15
Forum: Others
Topic: StellaZ Direct Mode?
Replies: 2
Views: 838

Re: StellaZ Direct Mode?

Same here. I am setting the temp only by changing the 'comfort' setpoint (to a fake value since the achieved temp is always 1-2 degrees below what I set). Looking forward to a way to use the direct mode. I have set up the corresponding slider control but can't be used to control the valve (it is onl...
by cato
Sunday 31 May 2015 18:42
Forum: Z-Wave
Topic: Howto use StellaZ in Domoticz? SetPoints...
Replies: 53
Views: 9358

Re: Howto use StellaZ in Domoticz? SetPoints...

Dear gabriels, making progress indeed. Thanks for support. About JSON commands I found out that I have to use the notation userid:password@IP:port since I do ask for credentials even within the LAN. Now the setpoint gets updated. I also managed to set the wakeup for the stellaZ at 1600 by pressing t...
by cato
Saturday 30 May 2015 15:21
Forum: Z-Wave
Topic: Howto use StellaZ in Domoticz? SetPoints...
Replies: 53
Views: 9358

Re: Howto use StellaZ in Domoticz? SetPoints...

I am trying to apply the useful suggestions, but I still can't see any effect in my setup. I think I have a basic problem as a beginner ... In the hardware node setup (the only place where I see the 'wake-up time' value) it is reported a wake-up of 604620. When I insert a shorter alternative value (...
by cato
Wednesday 27 May 2015 9:39
Forum: Z-Wave
Topic: Howto use StellaZ in Domoticz? SetPoints...
Replies: 53
Views: 9358

Re: Howto use StellaZ in Domoticz? SetPoints...

Thank you BertB!
I will try these settings. At least this would enable me to change based on a temperature setpoint.
Anyone that knows how to change modes in domoticz ? (it is a bit unconvenient to work with a single setpoint ...)
by cato
Monday 25 May 2015 23:47
Forum: Z-Wave
Topic: Howto use StellaZ in Domoticz? SetPoints...
Replies: 53
Views: 9358

Re: Howto use StellaZ in Domoticz? SetPoints...

really? nobody that can help me with these questions on StellaZ setup in domotics?
by cato
Friday 15 May 2015 8:39
Forum: Z-Wave
Topic: Howto use StellaZ in Domoticz? SetPoints...
Replies: 53
Views: 9358

Re: Howto use StellaZ in Domoticz? SetPoints...

Hi, I'm at my first experience with domoticz (installed over Pi2 + Razberry +Zway) and StellaZ. I have read this thread as well as what else I could find on this topic but I'm still puzzled on how to control the StellaZ that is not answering to my settings. After successful inclusion, I have the sli...