Search found 15 matches

by RFAH
Friday 01 September 2017 23:14
Forum: Domoboard
Topic: Domoboard - Configuration issues
Replies: 51
Views: 4612

Re: Domoboard - Configuration issues

I'm starting with Domoboard, but it seems not to support my blinds... is this correct. i've tried; Uitval = <id>, blinds and Uitval = <id>, blinds, Data but nothing happens or shown on the dashboard. Ant ideas's? I have the same problem. As far as i know, blinds are not supported (yet). You can sho...
by RFAH
Monday 17 July 2017 22:22
Forum: Meters
Topic: DIY cheap USB-cable to read P1 port of Dutch smart meter
Replies: 122
Views: 55480

Re: DIY cheap USB-cable to read P1 port of Dutch smart meter

I've recently also the Landis + GYR 350 DSMR 5 installed. The parameters are baudrate=115200 parity=None databits=8 stopbit=1 I've tested this with cu The command: cu -l /dev/ttyUSB1 -s 115200 --parity=none It should give the response "connected" and a telegram should appear. I also found some docum...
by RFAH
Monday 06 February 2017 19:12
Forum: Domoboard
Topic: Domoboard - Configuration issues
Replies: 51
Views: 4612

Re: Domoboard - Configuration issues

Hi Awst6000, In the top-tiles, the status of my blinds are still shown. I'm using the latest version of the master-build, not the developers build. (Domoboard "says" hurray! There is no update available for Domoboard). Also i'm not using the word blinds behind the xid. Maybe that's the difference. M...
by RFAH
Thursday 26 January 2017 22:07
Forum: Domoboard
Topic: Domoboard - Configuration issues
Replies: 51
Views: 4612

Re: Domoboard - Configuration issues

Hello, I want to add the venetians blinds to domoboard. Their type in domoticz = RFY, sybtype = RFY. (They are controlled by RFXCOME) I have tried the selector switch as i understand that the selector switch can show several buttons for up, stop and down. However, no buttons are shown. Are venetians...
by RFAH
Sunday 22 January 2017 17:14
Forum: Domoboard
Topic: Domoboard - Bug reports
Replies: 35
Views: 2205

Re: Domoboard - Bug reports

squandor,

Thanks for your help.
The percentage is indeed of an another idx.
Unfortunally i can not code, but if it needs to be tested i will be happy to do so.

Thanks again,
René
by RFAH
Sunday 22 January 2017 16:58
Forum: Domoboard
Topic: Domoboard - Bug reports
Replies: 35
Views: 2205

Re: Domoboard - Bug reports

squandor, I changed my config accoording to your advice, but no luck. The icon is added to the tile and i see the text Status for a brief moment, but than i see the percentage again. a part of my config looks like: [[[Verlichting]]] Woonkamer Verlichting = 118 Woonkamer verlichting group = 1, info, ...
by RFAH
Sunday 22 January 2017 15:03
Forum: Domoboard
Topic: Domoboard - Bug reports
Replies: 35
Views: 2205

Re: Domoboard - Bug reports

Hello, I have created a group in Domoticz which switch on or off all lights in the living room. (The group exists of On/off switches and dimmers) If one of the lights is on, Domoticz shows the term "mixed". If all lights are off, Domoticz shows the term "Off" And if all the lights are on, Domoticz s...
by RFAH
Saturday 04 July 2015 15:50
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

I also (re)added netatmo and it works nicely. Thanks. The sign next to the rain gauge looks good, but i'll have to wait for the rain to see if it is working ;) But i do have a question. In the wiki ( http://www.domoticz.com/wiki/NetatmoWeatherStation ), a screen is shown that you have to fill in a c...
by RFAH
Wednesday 10 June 2015 19:00
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

Multinet wrote:Last question : I was using TempHumBaro (for inside) and TempBaro (for outside) before. Is there a way to continu to use it ?
I'm not sure what you mean.
If you were using it with Netatmo before, i think that you can use it again.
But please explain your problem.
by RFAH
Tuesday 09 June 2015 22:27
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

Hello Multinet, Have you checked that CO is written in capitals? Not only in your settings it needs to be written in capitals (which it already is), but also in the Netatmo script A line (line 54 in my script) needs to be changed into DATATYPE_CO2 = 'CO2' Maybe it is written in lower-case letters se...
by RFAH
Monday 08 June 2015 19:15
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

I have version 2.2534 installed and it is working again (except the rain sensor, but that did never work at all) @ brakc Maybe a stupid question, but did you allow Domoticz to add new devices? (Settings -> settings -> system -> accept new hardware/sensors) @multinet I did have that problem when i ne...
by RFAH
Saturday 06 June 2015 11:06
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

I just found a topic (Json call fail after update) which could be the problem we have if no values are recieved anymore in Domoticz and if you are using https in stead of http. http://www.domoticz.com/forum/viewtopic.php?f=6&t=6780&p=45060&hilit=update#p45060 Accoording to this topic, you now need t...
by RFAH
Friday 05 June 2015 22:09
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

Hello, I just updated Domoticz from version 2.2514 to version 2.2525. With version 2.2525, Domoticz does not receive any values. Restart and so on does not help. I restored a previous version (restore an image) and the Domoticz (version 2.2418) does recieve the information again. So may something in...
by RFAH
Friday 05 June 2015 18:48
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

Hallo, I also had the problem that my sensors in Domoticz recieved no values. Also no error was shown. However, recently Netatmo only accepts https calls and does not support http anymore. In the netatmo.py script, there are two records with http (line 20 and 21 in my script). I changed that to http...
by RFAH
Wednesday 25 March 2015 22:32
Forum: Python
Topic: Python script for Netatmo weather station
Replies: 143
Views: 30871

Re: Python script for Netatmo weather station

Hello, I've a problem with my rain sensor. I've installed the python script accoording to the install procedure given by Box18 (thanks for that) and i use the netatmo.py script provided by cyberbot with the noise and rain sensor lines added. (also thanks) All sensors are added to Domoticz, included ...