Search found 48 matches

by multinet
Saturday 29 July 2017 14:03
Forum: Bugs and Problems
Topic: from raspi2 to raspi3 : crash when using my backup db
Replies: 2
Views: 379

Re: from raspi2 to raspi3 : crash when using my backup db

Hello Unfortunately not, I was considering to upgrade to raspi3 because of a lot of freeze of my domoticz on raspi2 I solved them (this freeze) by moving my installation from an Sd card to an Emmc card. Now it works like a charm with - domoticz - about 10 Lupa scripts and 10 events blocky - a dump10...
by multinet
Tuesday 04 July 2017 18:27
Forum: LUA
Topic: Traffic with waze in Domoticz
Replies: 104
Views: 16348

Re: Traffic with waze in Domoticz

Hello it seems that waze routingmanger return a 403 forbidden Do you have the same pb ? [email protected]:/home/pi# curl "https://www.waze.com/row-RoutingManager/routingRequest?from=x:***HERE_MY_X_FROM***+y:***HERE_MY_Y_FROM***&to=x:***HERE_MY_X_TO***+y:***HERE_MY_Y_TO***&returnJSON=true&returnGeometrie...
by multinet
Tuesday 27 June 2017 17:45
Forum: Bugs and Problems
Topic: Edomoticz install pb / npm and so
Replies: 1
Views: 257

SOLVED) Edomoticz install pb / npm and so

SOLVED by ruuning an apt-get remove nodejs
and running the install process from wiki
by multinet
Tuesday 27 June 2017 11:57
Forum: Bugs and Problems
Topic: Edomoticz install pb / npm and so
Replies: 1
Views: 257

Edomoticz install pb / npm and so

Hello Version: 5877 Platform: RASPI2 Plugin/Hardware: edomoticz Description: I've a trouble in installing edomoticz according to the wiki page I've this error message : [email protected]:~$ sudo npm install -g homebridge-edomoticz npm ERR! Linux 4.1.19-v7+ npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "i...
by multinet
Saturday 24 June 2017 22:23
Forum: Bugs and Problems
Topic: from raspi2 to raspi3 : crash when using my backup db
Replies: 2
Views: 379

from raspi2 to raspi3 : crash when using my backup db

Hello Version: lastest stable Platform: Raspi2 I want to move my domoticz from my raspi2 to my new raspi3 (using a emmc card instead of a sd card) I make a clean domoticz install on my pi3. I started domiticz on it and it runs OK Then I stop domoticz on my pi2&pi3, I copy the domoticz.db on my pi3 a...
by multinet
Saturday 10 June 2017 19:26
Forum: Bugs and Problems
Topic: Switch type Light1 does not run correclty
Replies: 1
Views: 265

Switch type Light1 does not run correclty

Hello I've a reed switch on my GPIO 17 (and a 8k fuse) and I put a switch lightning1 using this gpio and I've declared the correct export lines in my domiticz.sh The fuse in in a sureflap (catdoor) Under domoticz when my cat goes in the tunnel domoticz update the "last seen" date time but : - i've n...
by multinet
Saturday 25 March 2017 10:09
Forum: Python
Topic: Plex Status
Replies: 21
Views: 7560

Re: Plex Status

Hello

Since a plex update, the url of plex http:// ...... /status/sessions return a 401 unauthorized

Multinet
by multinet
Friday 24 March 2017 14:33
Forum: LUA
Topic: Real-time solar data : azimuth, Altitude, Lux sensor...
Replies: 217
Views: 23644

Re: Real-time solar data : azimuth, Altitude, Lux sensor...

I've adapted the script to call wunderground by pws and not by city it works too
by multinet
Friday 24 March 2017 14:09
Forum: LUA
Topic: Real-time solar data : azimuth, Altitude, Lux sensor...
Replies: 217
Views: 23644

Re: Real-time solar data : azimuth, Altitude, Lux sensor...

Ok if I change the City to Bordeaux (nearest big city from mine) it works fine and i got this json result : { "response": { "version":"0.1", "termsofService":"http://www.wunderground.com/weather/api/d/terms.html", "features": { "conditions": 1 } } , "current_observation": { "image": { "url":"http://...
by multinet
Friday 24 March 2017 13:51
Forum: LUA
Topic: Real-time solar data : azimuth, Altitude, Lux sensor...
Replies: 217
Views: 23644

Re: Real-time solar data : azimuth, Altitude, Lux sensor...

Hello The script was working like a charm before mid march. But now i've this error in log : 2017-03-24 10:05:00.570 Error: EventSystem: in /home/pi/domoticz/scripts/lua/script_time_SolarSendor.lua: /home/pi/domoticz/scripts/lua/script_time_SolarSendor.lua:75: attempt to index field 'current_observa...
by multinet
Tuesday 21 February 2017 13:58
Forum: Other questions and discussions
Topic: howto do a fullscreen chrome shortcuts like domoticz
Replies: 0
Views: 347

howto do a fullscreen chrome shortcuts like domoticz

Hello

Question for Gizmocuz !

On android when a add to homescreen the url of domoticz, it permit to run chrome in fullscreen mode.

I want to do the same with a homeweb site

How to do This ?

Thanks

Multinet
by multinet
Monday 13 February 2017 23:13
Forum: Other questions and discussions
Topic: Heat pump hitachi and domoticz
Replies: 0
Views: 284

Heat pump hitachi and domoticz

Hello

Does anyone control it's heat pump (mine is an hitachi) using domoticz?

If yes how ?

Thanks for sharing :)

Multinet
by multinet
Monday 13 February 2017 23:10
Forum: General Discussion
Topic: Best cheap hardware to run domoticz on?
Replies: 15
Views: 2548

Re: Best cheap hardware to run domoticz on?

Hello

Where did you found them ?

Multinet
by multinet
Wednesday 14 December 2016 10:19
Forum: Scripts [cleaning in progress]
Topic: Domoticz duplicate event when I save it after modification
Replies: 1
Views: 478

Domoticz duplicate event when I save it after modification

Hello I use the latest stable release on pi2 Sometimes (not all the time) when I modify an event and save it (via chrome on mac OS X) domoticz duplicate it in the list The lastest event with the modification gets the name of the original + a number. I had to delete the original one Can you explain m...
by multinet
Wednesday 14 December 2016 10:16
Forum: Scripts [cleaning in progress]
Topic: Force off to rfxcom device even if state is off in domoticz
Replies: 2
Views: 453

Re: Force off to rfxcom device even if state is off in domoticz

Zwave is the good solution for sure but I will migrate to it Amin 2017

I found a trick in blockly : set on and then set off seems to work (force off to device even if the state if already off in domoticz)
by multinet
Wednesday 14 December 2016 0:21
Forum: Scripts [cleaning in progress]
Topic: Force off to rfxcom device even if state is off in domoticz
Replies: 2
Views: 453

Force off to rfxcom device even if state is off in domoticz

Hello I´ve some shutter controlled by DIO rfxcom device If I control the device by the local switch domoticz does not catch The command so that it doesn't update the off to on status So I can have a shutter opened (should be on in domoticz) with a status at off in domoticz In that case In blocky the...
by multinet
Wednesday 14 December 2016 0:07
Forum: Scripts [cleaning in progress]
Topic: detect the chage in a selector if IF statement
Replies: 1
Views: 370

Re: detect the chage in a selector if IF statement

Found : need to test the string label instead of the integer value
by multinet
Tuesday 13 December 2016 14:25
Forum: Scripts [cleaning in progress]
Topic: detect the chage in a selector if IF statement
Replies: 1
Views: 370

detect the chage in a selector if IF statement

Hello

I've read the forum but not found the answer at this question :

How to test in a IF statement the change value in a selector

I tried using IF selector=level% (10) or IF selector=10 or IF selector="text" but not success
Blockly type All or device always not running

Any Help ?

Thanks
by multinet
Monday 12 December 2016 22:39
Forum: Blockly
Topic: Strange IF DO ELSEIF in blocky ?
Replies: 4
Views: 512

Re: Strange IF DO ELSEIF in blocky ?

You're right it works :)
Thanks