Search found 34 matches

by DeBaat
Monday 26 November 2018 18:47
Forum: RFLink Transceiver
Topic: Chamberlain Garage door opener RFLink
Replies: 3
Views: 897

Re: Chamberlain Garage door opener RFLink

One other thing to consider is that the Chamberlain works on 868 Mhz instead of 433. At least, mine does.
So no wonder it cannot be seen by the RFLink... ;)
by DeBaat
Saturday 03 November 2018 0:08
Forum: Other questions and discussions
Topic: How to put logic to temperature events?
Replies: 6
Views: 320

Re: How to put logic to temperature events?

So how could I add a timer variable ... how long is the temp over 47F ?? Nice to see the way you think. How about running the script every minute and keep track of the number of minutes in a separate variable? Something like this: IF temp OK THEN NumDefrostMinutes = 0; ELSE NumDefrostMinutes + 1; A...
by DeBaat
Saturday 27 October 2018 11:54
Forum: Other questions and discussions
Topic: How to put logic to temperature events?
Replies: 6
Views: 320

Re: How to put logic to temperature events?

Hai,
Would it be possible to set the limit to another value before warning?

I can imagine the freezer would not reach e.g. 100F if it is working ok.
So you would only need to be informed when the temperature is not below the critical value.
by DeBaat
Saturday 27 October 2018 11:45
Forum: Other questions and discussions
Topic: Honeywell Round Wifi+Synology NAS
Replies: 6
Views: 355

Re: Honeywell Round Wifi+Synology NAS

Hai Chief,
Interesting project you have.

Can you tell me how you managed to connect the Honeywell?
I have a Remeha eBase communicating with a remote station and would like to control it via Domoticz as well.

Thanks.
DeBaat
by DeBaat
Sunday 02 September 2018 11:22
Forum: Installation, Compiling, Permissions, Security and Starting
Topic: Second raspberry
Replies: 5
Views: 536

Re: Second raspberry

You mention the log:
2018-09-02 08:59:47.090 Status: Domoticz: TCP connected to: 10.0.1.xx:6144
However, you also state:
they both run on the same internet network (standard port 6644)
Looks to me there are two different port numbers involved: 6144 vs 6644...
by DeBaat
Sunday 19 August 2018 10:37
Forum: RFLink Transceiver
Topic: how can i add Somfy blinds to Domoticz ? (i have de 433.92)
Replies: 14
Views: 2135

Re: how can i add Somfy blinds to Domoticz ? (i have de 433.92)

Hai, I've got my Somfy blinds working as Blinds Inverted using the RFXtrx433E. The trick I used is not to use the programming button on the remote but the programming option on the motor. The motor can be programmed to react to several remotes, the Domoticz device is just another remote. So, try the...
by DeBaat
Wednesday 20 June 2018 22:47
Forum: Suggestions
Topic: Request for the use of friendly names in addition to device names
Replies: 5
Views: 656

Re: Request for the use of friendly names in addition to device names

The data set of a device now contains the ID to identify a device. In order to get this suggestion working, we only need to define an additional field (e.g. "slug") and the ability to set and change its value. Of course there also needs to be some validation when setting and changing the value to en...
by DeBaat
Monday 14 May 2018 23:05
Forum: Suggestions
Topic: Remeha eTwist
Replies: 23
Views: 5159

Re: Remeha eTwist

Hai manjh,
Thanks for this reply.
Can you tell me which OTGW you have installed?
And how you have wired it?
I'm reasonably with software but hardware...
Thanks again.
by DeBaat
Monday 14 May 2018 23:02
Forum: General Discussion
Topic: Free GiveAway (Domoticz starter set, Raspberry Pi3b)
Replies: 81
Views: 10547

Re: Free GiveAway (Domoticz starter set, Raspberry Pi3b)

Great action. Please count me in.
One of my contributions:
viewtopic.php?f=4&t=23188&p=179013#p179013
by DeBaat
Tuesday 08 May 2018 23:21
Forum: Bugs and Problems
Topic: Domoticz - Remote Server not working
Replies: 6
Views: 927

Re: Domoticz - Remote Server not working

Did you check on the devices that are available from the remote user?
You can check this with Settings => More Options => Edit Users => Set Devices for the user you selected to communicate with the other server.
by DeBaat
Tuesday 01 May 2018 20:59
Forum: PHP and all others
Topic: Do I really need Apache?
Replies: 8
Views: 1241

Re: Do I really need Apache?

In another post I read about Dashticz.
This is also a (set of) php page(s) running in the Domoticz environment.
How about to use the same technique for your php pages?
by DeBaat
Tuesday 01 May 2018 18:33
Forum: Rfxcom Transceiver
Topic: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz
Replies: 59
Views: 26506

Re: Temperature & Humidity Sensor compatible with RFXCOM/Domoticz

Hai All, I just recieved my Digoo TH1980 sensor set for temperature measurments for both indoor and outdoor. After I inserted the batteries, it almost immediately showed in my Domoticz installation running on my Synology with an RFXCOM RFXtrx433E. However, as I would expect both temperature values, ...
by DeBaat
Sunday 29 April 2018 20:06
Forum: Other questions and discussions
Topic: Coupling two Domoticz instances together
Replies: 0
Views: 361

Coupling two Domoticz instances together

Hai, Would it be possible to have two Domoticz instances send information to each other? I have Domoticz running on a RPi 3B+ and one on a Synology NAS. Both are running on the same version (latest stable). It has been working for a while in a master - slave combination where the Synology was the sl...
by DeBaat
Saturday 28 April 2018 8:53
Forum: General Discussion
Topic: Pairing vHome 433 wall switch
Replies: 2
Views: 606

Re: Pairing vHome 433 wall switch

Hai, Strange you couldn't get it working. I have some experience with KaKu (KlikAanKlikUit) devices myself. Both with and without remotes. The procedure I used to add the device without the remote is by indeed adding the manual switch in Domoticz using these steps: 1. Add manual switch with correct ...
by DeBaat
Friday 20 April 2018 7:23
Forum: General Discussion
Topic: We give away a Yeelight Color RGBW for free!
Replies: 94
Views: 6496

Re: We give away a Yeelight Color RGBW for free!

Great idea!
I like the option to use it to wake up with a smile and color depending on the weatherforecast.
by DeBaat
Sunday 01 April 2018 14:00
Forum: Suggestions
Topic: Remeha eTwist
Replies: 23
Views: 5159

Re: Remeha eTwist

gizmocuz wrote:
Sunday 01 April 2018 12:17
Its compatible with opentherm, so use an opentherm gateway ?
The manual describes two types iSense:
• iSense OpenTherm
• iSense RF (wireless), in combination with iBase (basisstation) RF-zender

I have the latter, so probably no OpenTherm?
by DeBaat
Sunday 01 April 2018 12:07
Forum: Suggestions
Topic: Remeha eTwist
Replies: 23
Views: 5159

Re: Remeha eTwist

Did anyone try to put an OTGW on that link? (OTGW = OpenTherm GateWay). I've used it on a Remeha Calenta/iSense combination, works great. This means the Remeha "speaks" rather pure OpenTherm, I think. Hai, I've got a Remeha Tzerra in combination with a iSenseRF / iBase. Can this be controlled via D...
by DeBaat
Saturday 31 March 2018 18:19
Forum: General Discussion
Topic: Pi 3B+ / stretch discussion thread
Replies: 12
Views: 2037

Re: Pi 3B+ / stretch discussion thread

Interesting subject. My situation: + I started using Domoticz on my Synology NAS. It runs the stable version V3.8153 wonderfully, although I do have some quirks with some plugins. + As the RPi 3B+ came out on Pi-day, I bought that as well with the intention to either: A. Migrate and remove Domoticz ...
by DeBaat
Tuesday 27 March 2018 17:53
Forum: Other questions and discussions
Topic: Wordpress frontend
Replies: 5
Views: 619

Re: Wordpress frontend

Interesting idea.
I'm also a huge fan of WordPress.

Would it be possible to have WordPress plugin for handling Domoticz stuff?
I would be willing to help as I do have some experience in building a plugin myself.
by DeBaat
Tuesday 27 March 2018 17:49
Forum: Other questions and discussions
Topic: Beware of Raspberry Pi SSH hijacks
Replies: 14
Views: 1847

Re: Beware of Raspberry Pi SSH hijacks

This looks like a serious issue. And as I try to be carefull and accessible at the same time, I configured a Let's Encrypt certificate on my Synology to access it securely from outside. Now that I also have a RPi, I would like to extend the Lets Encrypt certificate to also make the RPi available fro...