Search found 238 matches

by Domosapiens
Monday 16 April 2018 12:40
Forum: Blockly
Topic: Hotwater controll by time and temperature
Replies: 6
Views: 501

Re: Hotwater controll by time and temperature

Kre10, some remarks: - Nested IF is not allowed (remove the outer IF) - Use the IF with the blue star when ELSE is involved (correct for your inner IF) - use a Dummy Switch Device and let it switch ON at 6 and switch OFF at 22hr (with the Timer of the device) - combine this Dummy Switch in the IF pa...
by Domosapiens
Saturday 14 April 2018 22:09
Forum: Device information
Topic: Z-Wave factfile Fibaro FGBS-001 Universal Binary Sensor
Replies: 16
Views: 7051

Re: Z-Wave factfile Fibaro FGBS-001 Universal Binary Sensor

I am using a DC12V - 200mA charger
I think 200 mA is to weak.
Look for 500ma.
by Domosapiens
Monday 26 March 2018 15:25
Forum: Blockly
Topic: Automatically lock
Replies: 3
Views: 792

Re: Automatically lock

Build it like this:
Capture.JPG
Capture.JPG (23.15 KiB) Viewed 576 times
Check via the blue button "Show current states" if On/Off is correct (or Open/Closed?)
by Domosapiens
Sunday 25 March 2018 21:49
Forum: Blockly
Topic: PIR sensor turn off when no motion for 10 seconds
Replies: 1
Views: 499

Re: PIR sensor turn off when no motion for 10 seconds

Spoiler: show
(Remote control = On)
So many words and no picture ... :o
by Domosapiens
Sunday 25 March 2018 21:45
Forum: Blockly
Topic: Automatically lock
Replies: 3
Views: 792

Re: Automatically lock

Take a good look at the many examples here: https://www.domoticz.com/wiki/Blockly

Create the combinations like
(Nacht slot = Off) and (Remote control = On).

Start with "and" block
Add a left block: (Nacht slot = Off)
Add a right block: (Remote control = On)
Do the same for the Else if
by Domosapiens
Tuesday 27 February 2018 20:55
Forum: Blockly
Topic: "Start Script" will add # when passing an argument?
Replies: 4
Views: 598

Re: "Start Script" will add # when passing an argument?

Try %20 instead of the space?
by Domosapiens
Friday 23 February 2018 21:29
Forum: Other questions and discussions
Topic: Aeotec MultiSensor suddenly triggers all switches
Replies: 2
Views: 223

Re: Aeotec MultiSensor suddenly triggers all switches

It sounds like Z-Wave association, that is a direct connection between Z-Wave members. Normally this is arranged in the table on the right-hand side here: https://www.domoticz.com/wiki/images/d/d0/ZWaveNetworkInfo.jpg from here: https://www.domoticz.com/wiki/Zwave_network_and_group_info Check this t...
by Domosapiens
Thursday 22 February 2018 13:29
Forum: Blockly
Topic: Tuinlight wont work.
Replies: 3
Views: 663

Re: Tuinlight wont work.

I think Sunset and Sunrise is a time moment and not a time period. Start with a simple dummy switch: IS_DARK. IF (Time >= Sunset OR Time <= Sunrise) AND IS_DARK=Off Do IS_DARK=On IF (Time < Sunset OR Time > Sunrise) AND IS_DARK=On Do IS_DARK=Off If this works .. You can use IS_DARK in other Blokly's...
by Domosapiens
Wednesday 21 February 2018 23:18
Forum: Blockly
Topic: first blocky won't work
Replies: 5
Views: 686

Re: first blocky won't work

Make it
(....) AND ( (Camilla Telefoon=ON) OR (Mario Telefoon = ON) )
by Domosapiens
Tuesday 20 February 2018 17:03
Forum: Blockly
Topic: Maybe the easiest question (if you know the solution.
Replies: 10
Views: 795

Re: Maybe the easiest question (if you know the solution.

Start from fresh. Your If block is ok. take an "and" Blockly Then there is on the left space for a "=" blockly and on the right side for a "=" blockly Add on the left topolino and On Add on the right minnie and On Study the wiki http://www.domoticz.com/wiki/Blockly and look careful for the surroundi...
by Domosapiens
Tuesday 20 February 2018 14:37
Forum: Blockly
Topic: Maybe the easiest question (if you know the solution.
Replies: 10
Views: 795

Re: Maybe the easiest question (if you know the solution.

First pick the "and" block.
Put a condition to the left and one to the right.
Left: topolino=On
Right:minnie=On
Make this:
(topolino=On) AND (minnie=On)

And NOT as yours:
topolino=(On AND (minnie=On)
by Domosapiens
Tuesday 20 February 2018 11:52
Forum: Other questions and discussions
Topic: Timers attached to setpoints
Replies: 3
Views: 320

Re: Timers attached to setpoints

timer rules
by Domosapiens
Tuesday 20 February 2018 11:48
Forum: Other questions and discussions
Topic: Timers attached to setpoints
Replies: 3
Views: 320

Re: Timers attached to setpoints

Tested with stable version 3.8153 on Win7:
the timer function of the Setpoint dummy works correct
by Domosapiens
Tuesday 20 February 2018 1:01
Forum: Other questions and discussions
Topic: Timers attached to setpoints
Replies: 3
Views: 320

Re: Timers attached to setpoints

This command:

Code: Select all

http://127.0.0.1:8080/json.htm?type=command&param=udevice&idx=80&nvalue=0&svalue=22
adapts a dummy setpoint with IDX=80 to temperature=22.
Tested with stable version 3.8153 on Win7.

I assume you can use this command within a Blockly to set a temperature.
by Domosapiens
Monday 19 February 2018 23:01
Forum: Other questions and discussions
Topic: Dashboard
Replies: 3
Views: 472

Re: Dashboard

user variable to the dashboard so it can be modified, for example a "required temperature" variable
Use Dummy hardware.
Create Virtual Sensor
Select Thermostat Setpoint

This Setpoint can be used in Blockly to compare with a temperature sensor and take action.
by Domosapiens
Monday 19 February 2018 22:41
Forum: Blockly
Topic: Maybe the easiest question (if you know the solution.
Replies: 10
Views: 795

Re: Maybe the easiest question (if you know the solution.

First pick the "and" block.
Put a condition to the left and one to the right.
Left: topolino=On
Right:minnie=On
by Domosapiens
Tuesday 15 August 2017 10:40
Forum: Other questions and discussions
Topic: Nodes don't report status
Replies: 12
Views: 1547

Re: Nodes don't report status

That's not a real solution For me .. it was. A lot of "weak network" problems with S2. Migration to Gen5 solved it (or was it the clean start and rebuilding the network??) But there is some 4 years of technology difference between S2 and Gen5. You can try to use a short USB cable (0.5m) and relocat...