Search found 24 matches

by Padster
Friday 29 December 2017 20:37
Forum: Blockly
Topic: Is it my Blockly or is it a bug?
Replies: 0
Views: 233

Is it my Blockly or is it a bug?

Hi, I posted in the bug section but I'm wondering if its my Blockly at fault? So as not to double post here is a link to my post; https://www.domoticz.com/forum/viewtopic.php?f=6&t=21136 Basically if you look at the log it appears to be sending multiple 'set levels' and 'offs' per second. Is it my B...
by Padster
Friday 29 December 2017 14:47
Forum: Bugs and Problems
Topic: Domitech Z-wave Bulb with blockly
Replies: 2
Views: 171

Domitech Z-wave Bulb with blockly

I have a Domitech Z-wave LED bulb together with a neo coolcam motion sensor in my hallway. I have created a Blockly to turn the bulb on at a certain brightness depending on the time of day and the LUX. However I'm getting erratic results. I'm seeing things like the first motion turing the bulb on an...
by Padster
Thursday 28 December 2017 21:12
Forum: Z-Wave
Topic: Domitech ZE27EU don't report status, and set random dim-levels
Replies: 11
Views: 1261

Re: Domitech ZE27EU don't report status, and set random dim-levels

I have the exact same problem. Any news?
by Padster
Thursday 30 November 2017 12:13
Forum: Bugs and Problems
Topic: Problems since brown out
Replies: 0
Views: 128

Problems since brown out

I have had Domoticz on a RPi 3 with Razberry2 since May and it has been working really well. At the weekend we suffered a brown out where our lights dimmed but nothing went off. Since then my zwave devices have been acting really weird. The first thing I noticed was the hall light stayed on all nigh...
by Padster
Friday 29 September 2017 10:44
Forum: Blockly
Topic: Time condition not working
Replies: 4
Views: 733

Re: Time condition not working

Thanks guys for the answer - its been driving me nuts.
by Padster
Wednesday 20 September 2017 19:25
Forum: Blockly
Topic: Time condition not working
Replies: 4
Views: 733

Time condition not working

Hi, I've a Blockly that turns my hall light on and off dependent on movement and LUX. The brightness the light is set to should be 80% between 9am and 9pm and 60% outwith those hours. The movement and LUX part of the script works fine but the light always comes on at 60%. The system time is correct....
by Padster
Tuesday 22 August 2017 21:13
Forum: Z-Wave
Topic: Neo Coolcam siren as both alarm and bell
Replies: 2
Views: 742

Neo Coolcam siren as both alarm and bell

I have two Neo Coolcam sirens, They are capable of being both a alarm and doorbell. Currently I have them configured to sound the alarm if my smoke detectors go off. I would like to expand on this and use the door bell sound when my doors are open. I have looked around and found this forum post but ...
by Padster
Thursday 10 August 2017 11:02
Forum: News & Updates
Topic: Domoticz version 3.8153 released (Stable)
Replies: 167
Views: 96012

Re: Domoticz version 3.8153 released (Stable)

I'm not sure if this is related to the upgrade which I performed on as soon as released but my smoke and heat alarms and also my two sirens have not been seen since the upgrade. At least that what it says in the 'Devices' tab. I noticed because I replaced the batteries in them and they still show th...
by Padster
Wednesday 05 July 2017 12:57
Forum: Blockly
Topic: Blockly script execution
Replies: 2
Views: 909

Re: Blockly script execution

Hi, The scripts are configured as 'ALL' type. The edits are made within the IF conditions. For example in the below Blockly the test for the livingroom lights device being off was originally a test against a user variable. When I made the change it was as if the script wasn't running and then eventu...
by Padster
Tuesday 04 July 2017 14:47
Forum: Other questions and discussions
Topic: sub/slave device
Replies: 0
Views: 274

sub/slave device

Hi, I have mi-lights configured. This gives me 5 switches. 1 for each of the 4 channels/Lights and a all on/off. I use the all on/off switch in a Blockly that turns the lights on and off depending on Lux and motion. I use the other 4 switches in 'scenes'. Currently If I turn a scene on the 'all' swi...
by Padster
Tuesday 04 July 2017 13:34
Forum: Blockly
Topic: Blockly script execution
Replies: 2
Views: 909

Blockly script execution

Hi,

I've noticed if I add a script or edit a script it doesn't run straight away. It can take a while sometimes over an hour for the script to appear to work.

Any Ideas?
by Padster
Monday 26 June 2017 10:38
Forum: Blockly
Topic: Blockly stops running when making changes
Replies: 0
Views: 446

Blockly stops running when making changes

I've noticed this behavior when adding a new z-wave device or If I've been editing Blockly scripts. Basically the scripts appear to stop running reboots of my RP3 don't help. Gradually after quite some time they will start to function but even then only partially. For example I have a script that lo...
by Padster
Wednesday 21 June 2017 16:23
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Re: Turn Light On

Thanks again.

My Blockly did work when the 'AND' and 'OR' conditions were all inline. Just not sure is nesting them changed the interpretation. I know the order of evaluation is important.

I'll press the smoke alarm test when I get home.
by Padster
Wednesday 21 June 2017 14:17
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Re: Turn Light On

See if I've got this right :) It the LR PIR is on AND (LR Lights Auto=on AND LR Updown Light=off) AND Living Room < 100 SET Updown Lights Level= 5% I need to learn Blockly better than I have. Would this smoke/heat detection work? Basically if any of the smoke or heat detectors are ON then Set Smoke_...
by Padster
Wednesday 21 June 2017 14:02
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Re: Turn Light On

Many thanks - I didn't even know you could right click on the Blockly elements.
by Padster
Wednesday 21 June 2017 13:21
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Re: Turn Light On

Hi Guys, A couple of follow up questions. Although the Blockly below works - should I be using the switch states rather than a string? Capture.JPG Also in StanHD's post in this thread his 'and' condition allows for two lines thus making the test format neater. I can only see an inline 'and' conditio...
by Padster
Wednesday 21 June 2017 13:04
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Re: Turn Light On

Yep - thanks guys that sorted it.
by Padster
Wednesday 21 June 2017 12:06
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Re: Turn Light On

Hi,

Here is the test Blockly - very simple
lamp.JPG
lamp.JPG (18.52 KiB) Viewed 1684 times
Here are the current states
variables.JPG
variables.JPG (56.48 KiB) Viewed 1684 times
The lamp stays off.

My Domoticz info is;

Version: 3.5877
Build Hash: 15b013c
Compile Date: 2016-11-10 15:44:33
by Padster
Wednesday 21 June 2017 11:50
Forum: Blockly
Topic: Turn Light On
Replies: 13
Views: 1904

Turn Light On

Hi, I have a number of 'Light' devices. I can turn the light on and off manually by clicking the 'bulb' icon on the device. However if I am creating a Blockly script and use the 'Logic' 'Set' statement to set the device to 'On' it won't turn the light on. If I create a scene or group with the light ...
by Padster
Tuesday 20 June 2017 10:27
Forum: Other questions and discussions
Topic: How to check presence of Beacon ?
Replies: 296
Views: 36214

Re: How to check presence of Beacon ?

I've been using this for a while now and its pretty reliable.

I wonder though if this is a good thing to be running on a RPi3 with SD card. I am running the python script and raspberry piet's script on page 6.

Will this be causing a lot of writes to the SD card?