Search found 60 matches

by terrorsource
Monday 29 October 2018 10:14
Forum: LUA
Topic: Split Temperature Humidity
Replies: 7
Views: 717

Re: Split Temperature Humidity

I've now changed to a "Heiman Temperature Humidity Sensor HS1HT-Z+" from AliExpress but the script does not work. Data of the sensor is "23.3 C, 54 %" The script in the post above is only updating the Humidity and not the Temperature. can you execute the dumpscript below and send the dump output (p...
by terrorsource
Sunday 28 October 2018 16:53
Forum: LUA
Topic: Split Temperature Humidity
Replies: 7
Views: 717

Re: Split Temperature Humidity

I've now changed to a "Heiman Temperature Humidity Sensor HS1HT-Z+" from AliExpress but the script does not work.

Data of the sensor is "23.3 C, 54 %"

The script in the post above is only updating the Humidity and not the Temperature.
by terrorsource
Monday 01 October 2018 14:32
Forum: Device information
Topic: Neo CoolCam Wall Switch problem
Replies: 7
Views: 447

Re: Neo CoolCam Wall Switch problem

did you fix this issue? I have the same problem ,first i thought it was my script but after some testing and debugging is notice the same issue? SO my hotelswitch only works when i push 3 times Still have the same issue. Bought a Fibaro HC lite to test it out but results are not reliable (gf does n...
by terrorsource
Monday 01 October 2018 11:20
Forum: Device information
Topic: Neo CoolCam Wall Switch problem
Replies: 7
Views: 447

Re: Neo CoolCam Wall Switch problem

did you fix this issue? I have the same problem ,first i thought it was my script but after some testing and debugging is notice the same issue? SO my hotelswitch only works when i push 3 times Still have the same issue. Bought a Fibaro HC lite to test it out but results are not reliable (gf does n...
by terrorsource
Monday 01 October 2018 8:05
Forum: Device information
Topic: Neo CoolCam Wall Switch problem
Replies: 7
Views: 447

Re: Neo CoolCam Wall Switch problem

did you fix this issue? I have the same problem ,first i thought it was my script but after some testing and debugging is notice the same issue? SO my hotelswitch only works when i push 3 times Still have the same issue. Bought a Fibaro HC lite to test it out but results are not reliable (gf does n...
by terrorsource
Friday 28 September 2018 22:33
Forum: Others
Topic: Xiaomi Mi Flora [Temp/Light/Moisture] BLE Sensor
Replies: 317
Views: 60159

Re: Xiaomi Mi Flora [Temp/Light/Moisture] BLE Sensor

gropi wrote:
Friday 28 September 2018 21:14
That are good news. unfortunately my is not working stable.
Well, not anymore. Stopped working now also. Same issues. Really don’t know what the issue is.

Does anyone has this plugin working right now?
by terrorsource
Monday 24 September 2018 11:36
Forum: dzVents
Topic: group.state not on / mixed
Replies: 8
Views: 433

Re: group.state not on / mixed

The last script is just for test purposes only. Want to have it send a message when the group has changed (ON/OFF/Mixed). From there on i can switch "Sleeping" on and create an alarm for motion and doors. Maybe this other approach can help you achieving what you want. It will notify you within a mi...
by terrorsource
Friday 14 September 2018 9:28
Forum: dzVents
Topic: group.state not on / mixed
Replies: 8
Views: 433

Re: group.state not on / mixed

Try change all "dz" to "domoticz" or vice versa. Still not working. I've even cleaned up the script but it is not sending messages. Looks like it's never triggered. Now have only 1 switch in the group, a dummy switch. when i toggle it nothing happens. The script in its current form will only execut...
by terrorsource
Thursday 13 September 2018 20:25
Forum: dzVents
Topic: group.state not on / mixed
Replies: 8
Views: 433

Re: group.state not on / mixed

Yes, I've now created this, but it is not sending a message via Prowl when the status of the Group changes. Try change all "dz" to "domoticz" or vice versa. Verstuurd vanaf mijn ONEPLUS A3003 met Tapatalk Still not working. I've even cleaned up the script but it is not sending messages. Looks like ...
by terrorsource
Thursday 13 September 2018 13:18
Forum: dzVents
Topic: group.state not on / mixed
Replies: 8
Views: 433

Re: group.state not on / mixed

Yes, I've now created this, but it is not sending a message via Prowl when the status of the Group changes. return { on = { groups = { 'AlleLampenHuis' } }, execute = function(dz) myGroup = dz.groups("AlleLampenHuis") -- Change for your group if myGroup.state == "Mixed" and domoticz.devices("Thuis"...
by terrorsource
Thursday 13 September 2018 10:51
Forum: dzVents
Topic: group.state not on / mixed
Replies: 8
Views: 433

group.state not on / mixed

Hi, I'm trying to make a dzvents script based on a group of lights. I want to switch "Slapen" on when all lights are off between nighttime. Is it possible to get the status "Mixed" of a group? I now have a script based on "group.state == 'Off'" but "On" should not work because not all lights are on ...
by terrorsource
Sunday 09 September 2018 10:26
Forum: Others
Topic: Xiaomi Mi Flora [Temp/Light/Moisture] BLE Sensor
Replies: 317
Views: 60159

Re: Xiaomi Mi Flora [Temp/Light/Moisture] BLE Sensor

Few weeks back the scripts were working fine, unfortunately last days there was no chance. I got both with the module of Domoticz as well as with the python script errors. Now i updated bluez, some other python modules and placed my raspi closer (4 meters) to the MiFlora sensor. Right now everythin...
by terrorsource
Thursday 06 September 2018 12:35
Forum: Python
Topic: Python plugin: Xiaomi Mi Flower Mate
Replies: 55
Views: 8147

Re: Python plugin: Xiaomi Mi Flower Mate

I wonder if it is caused by the bluetooth dongle? I've a cheap chinese generic one. The Flower Care app on Android works very well so i doubt the issue is with the plant sensors. I doubt if the dongle is the issue here. I use a Raspberry-Pi model 3 with integrated BT, and have similar issues. Same ...
by terrorsource
Monday 03 September 2018 11:12
Forum: dzVents
Topic: Alarm with repeatAfterSec
Replies: 1
Views: 243

Alarm with repeatAfterSec

Hi, I'm trying to build an alarm script in DzVents and want to turn on the Siren for 10sec, then 5sec off then 10sec on etc etc so lang a dummy switch "Alarm_BG" is turned on. I was thinking that repeatAfterSec could help me with that. This is what i have so far, not very much but it's just a start....
by terrorsource
Sunday 26 August 2018 13:23
Forum: Others
Topic: Xiaomi Mi Flora [Temp/Light/Moisture] BLE Sensor
Replies: 317
Views: 60159

Re: Xiaomi Mi Flora [Temp/Light/Moisture] BLE Sensor

Does anyone have this miflora python working with domoticz right now? https://github.com/Tristan79/miflora hasn't been updated in 2yrs. running it now causes connecton errors between my pi 3b+ and the miflora sensor. Tried downloading the latest MiFlora 0.4 frm https://github.com/open-homeautomation...
by terrorsource
Sunday 29 July 2018 22:21
Forum: Heating/cooling
Topic: Controlling Toon [HACKED] from Domoticz
Replies: 267
Views: 62294

Re: Controlling Toon [HACKED] from Domoticz

The LUA script is triggered when there's a temperature change of 0.01 degrees, which causes a lot of logging in Domoticz. How can i set that to 0.1 so it it decreases the logs? I've changed to this local currentTemperature = tonumber(jsonThermostatInfo.currentTemp) / 100 currentTemperature = tonumb...
by terrorsource
Wednesday 25 July 2018 7:50
Forum: Z-Wave
Topic: Neo CoolCam PIR Temperature settings
Replies: 1
Views: 374

Neo CoolCam PIR Temperature settings

Hi, I've got a few Neo CoolCam PIR Motion Sensors v2's with temperature but i cannot set the the following settings (copied from Fibaro Smoke Sensor): 20. Temperature report interval: Time interval between consecutive temperature reports. Report is sent when new temperature value is different from t...
by terrorsource
Thursday 19 July 2018 17:09
Forum: Device information
Topic: Neo CoolCam Wall Switch problem
Replies: 7
Views: 447

Re: Neo CoolCam Wall Switch problem

Do you have enough zwave powered devices in the mesh to ensure you have a stable path to the server? Jos 5x Wall Switch 1CH 2x Wall Switch 2CH 1x Aeotech Switch 6 5x Fibaro Wall Plug So that shouldn't be an issue. Also having the issue if the Wall Switch is approx 1.5m from the Aeotec Gen.5 control...
by terrorsource
Thursday 19 July 2018 16:18
Forum: Device information
Topic: Neo CoolCam Wall Switch problem
Replies: 7
Views: 447

Neo CoolCam Wall Switch problem

Hi, I've installed a few Neo CoolCam Wall Switches 1CH/1-Gang and a few 2CH/2-Gang in my house. 2CH/2-Gang's are working fine, when i press the physical button Domoticz "sees" the state changed Press from OFF > ON = Domoticz ON Press from ON > OFF = Domoticz OFF 1CH/1-Gang's dont have that direct fe...
by terrorsource
Thursday 19 July 2018 10:17
Forum: Z-Wave
Topic: Cheap chinese z-wave products
Replies: 563
Views: 109376

Re: Cheap chinese z-wave products

Mmmhm, looks like the script isn't fully working in production. MASTER = connected to the black wire (single switch) SLAVE = no black wire connected ( double switch) When i press MASTER the lights will go ON but the SLAVE button does not switch ON When i press SLAVE the lights will go ON and the MAS...