Search found 175 matches

by Trigun
Monday 10 September 2018 9:45
Forum: Camera's
Topic: Has anyone has success with Zoneminder and Domoticz?
Replies: 14
Views: 6459

Re: Has anyone has success with Zoneminder and Domoticz?

got it working.
the username and password is still tough though but without it, it working fine.

thnx!
by Trigun
Friday 07 September 2018 9:27
Forum: Camera's
Topic: Has anyone has success with Zoneminder and Domoticz?
Replies: 14
Views: 6459

Re: Has anyone has success with Zoneminder and Domoticz?

hi there,

i know this is an old threat but i am hoping someone can help me out here.
I have zoneminder configured and working well(v1.30.4).

I would like to enable the zoneminder stream into domoticz.
I've read the posts but can't seem to get it to work.

thanks in advance!

Grtz
by Trigun
Thursday 19 July 2018 8:12
Forum: iOS
Topic: homebridge-edomoticz Plugin
Replies: 1555
Views: 233929

Re: homebridge-edomoticz Plugin

Hi All,

just a quick question as I am setting up Domoticz again in my new home.
I was just wondering which setup on page 1 of this threat, I should use to be compatible with Domoticz 4.9700?

thanks a lot!

Grtz.
by Trigun
Tuesday 05 December 2017 10:39
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

Just create it with the JSON command from the first page of this post. Don't forget to change the IP! I'll write a full guide tomorrow if OK for the authors because everything is spread now... Hi Sammyke007, I followed your feedback for a while and just wanted to say thanks! It’s been a great help!...
by Trigun
Monday 13 November 2017 22:08
Forum: Show your projects
Topic: Grafana with InfluxDB for Domoticz
Replies: 42
Views: 16260

Grafana with InfluxDB for Domoticz

you can run it on any device as long as you point the data towards the device on which the database is running and just point Grafana to the dB server

Those two can be on the same server by the way

Sent from my iPhone using Tapatalk
by Trigun
Wednesday 08 November 2017 13:52
Forum: Dashticz
Topic: Dashticz - General Discussions
Replies: 3492
Views: 288413

Re: Dashticz - General Discussions

Hello, Is there a possibility to make dashticz only accesible with password from external so another network than home network? And that you dont need it when you are in the network. Because when i create dashticz now you can just go to ip:port/directory/ and you will be in the dashboard withput an...
by Trigun
Sunday 29 October 2017 21:58
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

What happens when you swap the commandarray and weet line order. The print above the commandarray is in the log? something happend. 2017-10-13 21:29:06.049 LUA: Water usage is still 173.005m3 2017-10-13 21:29:06.050 LUA: wget http://192.168.1.94:8080/json.htm?type=command¶m=udevice&idx=157&svalue=1...
by Trigun
Friday 13 October 2017 21:33
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

What happens when you swap the commandarray and weet line order. The print above the commandarray is in the log? something happend. 2017-10-13 21:29:06.049 LUA: Water usage is still 173.005m3 2017-10-13 21:29:06.050 LUA: wget http://192.168.1.94:8080/json.htm?type=command¶m=udevice&idx=157&svalue=1...
by Trigun
Friday 13 October 2017 21:21
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

Do you get some sort of error in the log? Looks oke to me. Is the ip included in your system settings network e.g. 127.0.0.*;192.168.*.* of both devices? Executing in browser should be the same as in script. You can use a print for debuging instead of os.execute. I can see the lua script being trig...
by Trigun
Friday 13 October 2017 21:11
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

Do you get some sort of error in the log? Looks oke to me. Is the ip included in your system settings network e.g. 127.0.0.*;192.168.*.* of both devices? Executing in browser should be the same as in script. You can use a print for debuging instead of os.execute. I can see the lua script being trig...
by Trigun
Friday 13 October 2017 20:48
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Water meter readout with raspberry and Inductive NPN sensor

Should be sWaterUsage in keep Alice part! alright, I tested it with using the line in a browser and that works! the virtual device did change, great! but back in the script it does nog change, I've also tried the "Commandarray... etc" no luck either. any ideas? this is my setup: commandArray = {} -...
by Trigun
Friday 13 October 2017 10:14
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

I tried it as well, with the same result as LouiS22. I do see it in the logging though. But is stays 0. I’ll try when it get home this afternoon, thnx for you help!


Sent from my iPhone using Tapatalk
by Trigun
Thursday 12 October 2017 22:29
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

Hi Louis22, i think i might have the same question. You probably now have all the data on a remote pi? In my case, I can’t get the info to the master Pi through the “master-slave” functionality but am I correct that with using the solution above, this is possible? Thnx! Sent from my iPhone using Ta...
by Trigun
Thursday 12 October 2017 21:33
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Re: Watermeter lezen met raspberry en Inductieve NPN sensor

Hi Louis22, i think i might have the same question. You probably now have all the data on a remote pi? In my case, I can’t get the info to the master Pi through the “master-slave” functionality but am I correct that with using the solution above, this is possible? Thnx! Sent from my iPhone using Ta...
by Trigun
Thursday 12 October 2017 13:10
Forum: Dashticz
Topic: Dashticz - General Discussions
Replies: 3492
Views: 288413

Re: Dashticz - General Discussions

Maybe a dumb question but how does this work as dashticz is used within your local network? Besides the fact that is does not share personal info, I prefer to have my home automation cut off from the outside world as much as possible.


Sent from my iPhone using Tapatalk
by Trigun
Thursday 12 October 2017 10:29
Forum: Other questions and discussions
Topic: Watermeter lezen met raspberry en Inductieve NPN sensor
Replies: 270
Views: 41366

Watermeter lezen met raspberry en Inductieve NPN sensor

Hi Louis22, i think i might have the same question. You probably now have all the data on a remote pi? In my case, I can’t get the info to the master Pi through the “master-slave” functionality but am I correct that with using the solution above, this is possible? Thnx! Sent from my iPhone using Tap...
by Trigun
Tuesday 03 October 2017 19:58
Forum: General Discussion
Topic: TIP! android tablet on the wall
Replies: 40
Views: 9687

Re: TIP! android tablet on the wall

The probleem might be that the page uses the cache and after a while you might run out of memory, at least this what I experience with my IPad. Reloading the every few minute might solve this I guess.


Sent from my iPhone using Tapatalk
by Trigun
Friday 22 September 2017 15:43
Forum: Third party and supplementary tools
Topic: How to monitor your internet connection with virtual custom sensors
Replies: 189
Views: 35964

Re: How to monitor your internet connection with virtual custom sensors

As far as my knowledge goes \r is a dos<=>unix issue. Please open the file in a good editor and see your CarageReturns and Linefeed at then end of each line. Hi freijn, i am using an exact copy of the script being used(with my own info) not sure where it goed wrong, Ik keep getting the error. the r...
by Trigun
Monday 18 September 2017 23:10
Forum: Bugs and Problems
Topic: Some sensors on slave domoticz are not showing up on master
Replies: 44
Views: 6953

Re: Some sensors on slave domoticz are not showing up on master

No this has been reported before, and the reason is known. If it's very easy to fix (@tillo), please propose a patch... the main reason is little/big endian incompatibility so we need to send it via a json instead of binary And over the years (yes...) there have been made improvements Maybe a stupi...
by Trigun
Sunday 17 September 2017 20:51
Forum: Third party and supplementary tools
Topic: How to monitor your internet connection with virtual custom sensors
Replies: 189
Views: 35964

Re: How to monitor your internet connection with virtual custom sensors

hi all, I finally managed to install speedtest on my synology. when I run speedtest-cli I get results. but when I try to run the script, it doesn't work. when I run I get the following errors: Knipsel2.PNG Line 2 and line 11 are empty lines. #!/bin/bash #setup host=192.168.1.21 port=8084 pingidx=3 d...