- 1 Please note
- 2 433 MHz devices
- 3 EnOcean devices
- 4 Z-Wave devices
- 5 IP-networkcameras
- 5.1 General security warning
- 5.2 IP-Cameras sorted by brand
- 5.3 Grabbing snapshots from RTSP-stream with script based on 'ffmpeg'
- 5.4 Workaround for getting RTSP-based cam to work in Domoticz (through Synology NAS)
- 6 WiFi Light
- 7 Logitech Remote
- 8 Philips Hue
- 9 Internet Service
- 10 Solarinverters
- 11 USB Devices
- 12 PIFace
It is impossible for the developers to own all hardware that is supported by RFXCOM / Z-Wave / others, so this means that some devices are supported by RFXCOM / Z-Wave, but not yet supported in Domoticz.
To get your device supported in Domoticz, we need:
- In case of 433Mhz device with RFXCOM: RFXmngr screen dump (copy-paste text, not a screen dump)
If that is not enough, please provide us with either:
- Your device (please contact us before sending, we will ship it back), or
- Donate a device to us, also please contact us before doing so
You can also open a topic on the forum to discuss about the product.
433 MHz devices
Please also mention if you have the device working with the RFXtrx433 and/or the RFXtrx433E
Alecto WS1200 = Weatherstation
Alecto SA30 = Smoke Detector [ linkable smoke detector ]
ANSLUT = IKEA light
A-OK roller blind motor = Blind motor
ASA (RFXtrx433E) = Blind motor
ATI Remote Wonder = Remote
ATI Remote Wonder II = Remote
ATI Remote Wonder Plus = Remote
Atlantic = Sensor?
Banggood SKU174397 Temperature sensor. Seen as 'Alecto WS1700' when you enable 'Rubicson' protocol on RFXCOM. See also the forum topic.
Brel 45MR40 (=blinds motor) works with RFXtrx433E, connection procedure described in this forum topic .
Byron SX chime
Chacon (except EMW200)
Chacon (including EMW200)
CLSF LM-101LB Smoke detector
Cresta weather sensors (TX2/3/4/7/17,WS2300)
Cresta Temp/Hum Sensor TS34C
Cresta Temp/Hum Sensor TX320
Digimax RTS10 / RFS10 / TLX1206
ebode - XDOM
Efergy Engage forum tread engage efergy platform
Ematronic roller blind motor
Energenie ENER010 
Energenie ENER002  - manually add as COCO GDR2, put socket in learn mode, send a COCO GDR2 on/off command on the address you want it to learn to
ESP2866 With ESPEasy
Eurochron TSC34C (sold by Conrad)
Eurodomest/Intertek 972080 from Action [ Add as 'ARC' device, works with RFXCOM 'E' version. Included remote not working with Domoticz]
EV1527 PIR (branded BQ677 / 80L Wireless Intelligent Wide-Angle PIR sensor (using RFLink gateway 1.1 r35)
EverFlourish EMW203R-UK Remote Control Plug (Sold by B&Q as GAO Remote Control Switch GAO Remote Control Switch)(using RFLink gateway 1.1 r35)
Flamingo FA20RF [ linkable smoke detector ]
Focus MD-214R wireless alarm siren (RFXtrx433E)
Hideki, TFA weather sensors
HomeEasy (including HE105)
HomeEasy EU HE300
HomeEasy EU HE305 door sensor (RFXtrx433E)
HomeEasy EU HE800
Horstmann C-STAT 11/17 Thermostat and ASR-ZW Switch Forum post:
HomeEasy EU HE842 Remote Control Wall Switch (using RFLink gateway 1.1 r35)
HomeEasy EU HE863 Outdoor Light Sensor (using RFLink gateway 1.1 r35)
KD101 (Avidsen, Chacon, NEXA, Flamingo, Blyss, Proove)
La Crosse weather sensors
LightwaveRF, Siemens (lighting & power)
Maplin N32HN Sockets  - manually add as COCO GDR2 with address matching selector wheels on the socket
Media mount projection screen
Mertik Maxitrol (G6R-H4T1, G6R-H4TB)
Maverick bbq thermometer ET732
MAX Control sockets (C45-100150), use 'Impuls' protocol
Maplin branded RSL3660R (using RFLink Gateway 1.1 r35)
Nexa LGDR-3500 power outlet (RFXtrx433E)
Nexa LMST-606 door sensor (RFXtrx433E)
Nexus design IW008T
Oregon Scientific BWR101/BWR102, GR101
Oregon weather sensors (all 1.0,2.1,3.0)
OREGON SCIENTIFIC THGR328N
Oregon Scientific Motion sensor MSR939
OUDI AD-87 433MHz Wireless Door Contact - White | 'Lighting 4' protocol | RFXtrx433E | Forum
OWL Intuition CM180i
Prologue Temperature & Humidity sensor (Biltema 84-0871)
Raex roller blind motor
Sencor SWS 3TS (recognized as CrestaTS34C)
SUNLUXY PB-62 Wireless Doorsensor (recognized as Lighting4, PT2262)
Techno line TX95-TH
UPM/Esic Clas Ohlson (very short receive range)
Viking, FineOffset (02035,02038, 02811)
WH3 Temperature Sensor | 'FineOffset/Viking' protocol | RFXtrx433E | Forum
X10 lighting, X10 security
X10 dimming is not supported by the RFXCom
X10 MS13 Motion Sensor (Battery change will cause loss of ID and settings)
X10 MS13E2 Motion, Sensor (With memory, battery change will not cause loss of settings)
BSC EnOcean USB 300 USB-Gateway 868MHz / TCM310 Chipset
Eltako Wireless Sensor (Wireless push-buttons FT55-rw) PTM 215, PTM 210 module
NodOn Indoor Temperature and Humidity Sensor STPH-2-1-05
Trio2Sys Outdoor Temperature Sensor T2S10020076
Aeon Labs Aeotec Z-Stick S2 (non Z-Wave Plus)
Aeon Labs Aeotec Z-Stick Gen5 (Z-Wave Plus)
Vision Z-Wave Stick ZU1401
Z-Wave.Me RaZberry (Raspberry PI GPIO daughter card)
Z-Wave.Me UZB Z-Wave Plus USB stick
If you are going to buy a new usb stick, buy a Z-Wave Plus model because they will support all Z-Wave Plus and non-Plus devices.
DO NOT unplug the USB sticks while Domoticz is running or it will crash.
If you want to include nodes with the Aeotec sticks, turn off the Pi before removing the stick.
Also you sometimes need to be persistent when including a node fails for the first time.
Sometimes you need to try many times to include a node before it will work.
Aeon Labs = Aeotec
Aeon Labs Z-Wave stick
Aeotec Panic Button
Aeotec Z-Stick Series 2
Aeotec Z-Stick Series GEN5
Aeotec ZW088 Key Fob Gen5
Aeotec ZW100-C MultiSensor 6
Aeotec ZW096-C16 Smart Switch 6
Aeotec LED Bulb
Aeon Labs Recessed Door Sensor
Aeon Labs Multi Sensor
Aeon Labs Energie meter Hem3-100A
Aeon Labs Extender
Aeon Labs Recessed Door Sensor GEN5
Aeotec Micro Smart Energy Switch G2 (DSC18103)
BeNext Energy Switch [ incl. use measurement, and Solar measurement ]
Comm5 MA-5xxx-2 relay and digital sensors
Everspring SE812 Siren
Everspring SF812 Smoke Alarm
Everspring SP814 Motion Detector
Everspring AD142 Plug-in Dimmer Module
Everspring AN157 Plug-in Appliance Module
Everspring AN158 Plug-in Meter Appliance Module
Everspring TSE03-0 Doorbell
Everspring ST812 Flood Detector
Everspring ST814 Temperature and Humidity detector
Eminent EM6550 Wallplug (recognized as: 'Everspring AN145 Lamp Screw In Module')
Eminent EM6551 Wallplug dimmer (recognized as: 'Everspring AD142 Plug-in Dimmer Module')
Eminent EM6552 Wallplug (recognized as: 'Everspring AN158 Plug-in Appliance Module')
Eminent EM6555 Lamp Screw in module (recognized as: 'Everspring AN157 Plug-in Appliance Module')
Eminent EM6581 Motion Detector (recognized as: 'Everspring SP814 Motion Detector')
Eminent EM6601 Energy Reader (recognized as: 'NorthQ NQ-92021 Power Reader')
Eminent EM6575 Alarm module (recognized as: 'Everspring SE812 Siren')
EUROtronic EUR_STELLAZ Wall Radiator Thermostat Valve Control (temp. set, low-battery warning, temp. read (with polling on))
Fakro ZWS230 Window Opener (partially? open, stop, close works)
FIBARO System FGBS001 Universal Binary Sensor
FIBARO System FGBS321 Universal Binary Sensor (Shown as FGBS001)
FIBARO System FGD211 Universal Dimmer 500W
FIBARO System FGD212 Universal Dimmer 250W
FIBARO System FGK101 Door Opening Sensor (including optional temperature sensor)
FIBARO System FGMS001 Motion Sensor (movement, temperature, lightlevel, tamper) (EU ZW+ version 3.2 movement, temperature DOES NOT WORK)
FIBARO System FGRGBWM-441 (RGBW Controller)
FIBARO System FGRM222 Roller Shutter Controller 2
FIBARO System FGSS101 Smoke Sensor
FIBARO System FGSD-002 Smoke Sensor EU V3.3
FIBARO System FGS221 Double Relay Switch 2x1.5kW
FIBARO System FGS222 Double Relay Switch 2x1.5kW
FIBARO System FGS223 Double Relay Switch 2 2x1.5kW
FIBARO System FGWPE Wall Plug
FIBARO System FGFS101 Flood Sensor (including temperature,tamper)
FIBARO System FGSD002 Smoke sensor (including temperature,tamper)
FIBARO System FGS212 Switch 3kW
Greenwave PowerNodes 1 and 6 socket version with power measurement, also known as Nuon Smart Plug 1 and 6
EZ-Motion/Homeseer HSM100 (temp works, motion works, Lux does not work)
Jasco Z-Wave Wireless Lighting Control On/Off Switch, 45609
Nuon Smart Plug 1 and 6 with power measurement (are actually Greenwave PowerNodes 1 and 6)
Philio Technology Corporation PAN04-1 Double Relay Switch 2x1.5kW with Power Measurement
Philio Technology Corporation Slim Multi-Sensor PSM02
Popp 123580 Plug-in Dimmer
Popp 123658 Plug-in Switch plus Power Meter
Popp Z-Weather Station
Popp 123627 Plug-in switch
Popp / Duwi ZW ZSA 3500 Plugin Switch
Popp / Duwi ZW ZS 3500 Plugin Switch
Qubino ZMNHBA2 Flush 2 Relays (Also supports power measurement. Temp sensor optional.) - Not fully working, strange behavior when cliking switch on Domoticz
Qubino ZMNHDA2 Flush Dimmer (Also supports power measurement, two additional general purpose switches. Temp sensor optional.)
Qubino ZMNHDD1 Z-Wave Plus Flush Dimmer (Also supports power measurement, two additional general purpose switches. Temp sensor optional.)
Qubino ZMNHJD1 Dimmer "Fil Pilote" (for heater management) (requires to create xml config file - refer to post "QUBINO ZMNHJD1 not compatible with Domoticz ?" in forum)
The Z-Wave Plus devices might not work with the Aeon Labs S2 stick with Domoticz version <3.4834.
(Dimmer confirmed however to work with Aeon Labs V5 stick and Z-Wave.me stick).
To get the additional switches of Z-Wave Plus devices working you need to add the node in several groups. See the forum.
All Qubino dimmers can dim very low power LED lights without any bypass as they do not require a minimum load.
TKB TZ68 (on/off socket)
Vision ZS6301 CO Detector
Vision ZD2102 Door/Window Sensor
Vision ZP3102 PIR Motion Sensor (there is a red sensor's headline in Switches and Dashboard)
Vision ZG8101BR Garage Door Sensor
Vision ZM1601 alarm siren
Z-Wave.Me UZB Z-Wave Plus certified USB Stick
Z-Wave.Me RaZberry a tiny daughter card that sits on top of the Raspberry PI GPIO
Zipato RGBW LED bulb
ZOOZ ZSE40 Plus 4-in-1 Sensor
This page will give you an overview of IP-cameras that users have reported working with Domoticz.
Please mention the brand + type of your camera and also the URL to the image.
If you want to try if your camera works, a lot of settings for different brands of cameras can also be found here: http://www.ispyconnect.com/sources.aspx
Please only add the devices which are really known to work!
General security warning
When connecting the IP-camera to your network, be sure to put a username and a strong password on your IP-camera if you have it opened up to internet, otherwise you might end up at http://insecam.org/
Block internet access to the camera in your router if you don't want to have it connected to the internet.
A fast way to achieve this is to leave the 'Default gateway' field in the camera empty. By doing this it will only have access to your local LAN and no internet access.
IP-Cameras sorted by brand
Android Phone (Tested with Sony Xperia V) using this app: IP Camera (Change default port!) - Image URL: shot.jpg
AVtech AVN362 - Image URL: /cgi-bin/guest/Video.cgi?media=JPEG&channel=1
Axis M1054 - Image URL: jpg/image.jpg?size=3
Axis 206 - Image URL: jpg/image.jpg?size=3
D-Link DCS-825L - Image URL: /image/jpeg.cgi
D-Link DCS-932L - Image URL: image/jpeg.cgi
D-Link DCS-935L - Image URL: image/jpeg.cgi
D-Link DCS-942L - Image URL: image/jpeg.cgi
D-Link DCS-2332L - Image URL: image/jpeg.cgi
D-Link DCS-5009L - Image URL: /image.jpg
D-Link DCS-5020L - Image URL: image/jpeg.cgi
D-Link DCS-5222LB - Image URL: image/jpeg.cgi
Dahua HDW3200S - Image URL: http://<IP address>:9989/onvif/media_service/snapshot?channel=0&subtype=0
Dahua IPC-HDBW4421R - Port "empty" - Image URL: cgi-bin/snapshot.cgi?channel=0
DBPower MEYE-155303-FBACE - Image URL: http://<ip address>:81/snapshot.cgi?user=username&pwd=password
Ebode IPV38 - Port 80 - image URL: snapshot.cgi
Ebode IPV58P2P - Port 88 - Image URL: cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=<user>&pwd=<pwd>&
Elro C800IP (also known as Trendnet TV-IP100) - Port 80 - Image URL: /image.jpg
Eminent EM6225 - Port 81 - Image URL: auto.jpg
Floureon 4CH CCTV DVR - Port 80 - Image URL: /cgi-bin/snapshot.cgi?channel=1&user=USERNAME&password=PASSWORD
Foscam FI8905W - Port 80 - Image URL: /snapshot.cgi?user=#USERNAME&pwd=#PASSWORD
Foscam FI8907W - Port 80 - Image URL: /snapshot.cgi?user=#USERNAME&pwd=#PASSWORD
Foscam FI8909W - Port 80 - Image URL: /snapshot.cgi?user=#USERNAME&pwd=#PASSWORD
Foscam FI8910W - Port 80 - Image URL: snapshot.cgi
Foscam FI8918W - Port 80 - Image URL: snapshot.cgi
Foscam FI9853EP - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam FI9831P - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam FI9831W - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam FI9826P - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=USERNAME=&pwd=PASSWORD
Foscam FI9826W - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam FI9803P V2 - Port 80 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam FI9804W - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam FI9900P - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=#USERNAME&pwd=#PASSWORD
Foscam C1 - Port 88 - Image URL: /cgi-bin/CGIProxy.fcgi?cmd=snapPicture2&usr=USERNAME&pwd=PASSWORD
Hikvision DS-2CD2532F-IWS (Mini-Dome) - Port 80 - Image URL: Streaming/Channels/1/picture
Hikvision DS-2CD2032-I 3MP bullet cam
Hikvision DS-2CD2132F-IS - Port 80 - Image URL: /Streaming/Channels/1/picture
INSTAR IN-5905HD - Image URL: /tmpfs/snap.jpg?usr=YOUR_USER_NAME&pwd=YOUR_PASSWORD
Iphone 4 changed into IP cam using this app: http://skjm.com, Image URL: image.jpg
Level one FCS-5051 - Image URL: /cgi-bin/jpg/image.cgi?
Linksys WVC54GCA - Image URL: img/snapshot.cgi
Lowes Iris Digital Outdoor Security Camera - Image URL: img/snapshot.cgi?size=4 (size=3 enables zoom, username/password not required)
Maygion H264 IP Camera - Image URL: http://<ipaddress>:81/snapshot.cgi?user=usernamei&pwd=password
Neo Coolcam (Pan-tilt camera from http://www.kingstarinternational.nl/) - Port 1888 - Image URL: snapshot.cgi?user=XXX&pwd=XXXX" (where XXX = Username and XXXX = Password)
PANASONIC BL-C131 (only video streaming works : the snapshot does not work) - Port 80 - Image URL: SnapShotJPEG?Resolution=640x480&Quality=Standard
Reolink - Port 80 - /cgi-bin/api.cgi?cmd=Snap&channel=0&rs=wuuPhkmUCeI9WG7C&user=ADMINNAME&password=PASSWORD
Supra IPC-10AC (aldi) - Image URL: URL/snapshot.cgi?user=#USERNAME&pwd=#PASSWORD
Sunell (CGI API) - Image URL: cgi-bin/image.cgi?userName=#USERNAME&password=#PASSWORD&cameraID=1&quality=1
Sricam AP003 Use Admin User & Password in IP. - Image URL: snapshot.cgi (and/or: index.htm/videostream.asf?user=xxxxx&pwd=xxxxxxx&resolution=640*480 (or 320*240))
Tenvis jpt3815w - Image URL: snapshot.cgi?user=????&pwd=????
Tenvis IProbot 3 (PTZ controls + audio not available in Domoticz) - Image URL: ip:port/snapshot?username=[username]&[password]&strm=0
TOP201 - Image URL: http://x.x.x.x/webcapture.jpg?command=snap&channel=0
Ubiquiti AirCamDome - Port 80 - Image URL: snapshot.cgi?user=#USERNAME&pwd=#PASSWORD (make sure you have turned off "Use HTTPS" on "Device" tab, else it will redirect to https and that doesn't seem to work with Domoticz)
VIVOTEK FD8134V - Port 80 - Image URL: cgi-bin/viewer/video.jpg
VIVOTEK PT7137 - Port 80 - Image URL: cgi-bin/video.jpg
VStarcam C7824WIP - Port 81 - Image URL: snapshot.cgi?user=#USERNAME&pwd=#PASSWORD
WANSCAM HW0021 - Port 80 - Image URL: web/auto.jpg?-usr=****&-pwd=****&
WANSCAM JW008 - port 99 - image URL : snapshot.cgi
Xyclop XC-BU-34F-IR - port 80 - Image URL: Streaming/Channels/1/picture
Y Cam Knight SD - Image URL: snapshot.jpg
Grabbing snapshots from RTSP-stream with script based on 'ffmpeg'
Cams that spit out a RTSP-stream (Real Time Streaming Protocol) won't work in Domoticz.
With this script you can grab snapshots from a RTSP-stream. It uses 'ffmpeg' to open the RTSP-stream and grab a snapshot from it.
You still can't use it directly in Domoticz, but if you want to grab a snapshot when the doorbell is pressed for example, this script will do so (outside of Domoticz).
Workaround for getting RTSP-based cam to work in Domoticz (through Synology NAS)
Cams that spit out a RTSP-stream (Real Time Streaming Protocol) won't work in Domoticz.
However, if you have a Synology NAS and have the cam working in the Surveillance Station package, you can use this script. It grabs a the stream from the Surveillance Station package and spits it out as a JPEG-image.
You can then use this in Domoticz, because the PHP-script mimicks itself as a JPEG file. The conversion of the stream is done by the NAS. Pretty clever huh!? ;)
Harmony Smart Control
Harmony (Ultimate) Hub
(Be sure the Hub is included)
Domoticz can see and start activities on the Hub. It cannot control devices directly.
For every activity a switch device is added in Domoticz.
Logitech Harmony Hub wiki entry
Logitech Harmony forum topic
The Philips Hue bridge and ecosytem are natively supported in Domoticz.
Supported Hue lights:
Hue E27 bulb
Hue GU10 bulb
Hue Lux E27 bulb
Hue White bulb
Hue White and Color Ambiance A19/E27 bulb
Hue White and Color Ambiance GU10 bulb
Hue Lightstrip Plus (RGBW)
Philips Friends of Hue Bloom
Philips Friends of Hue Iris
Philips Friends of Hue Lightstrip (RGB)
All other official Philips Hue and Friends of Hue products.
LivingWhites E27 bulb
LivingColors gen 2
All other LivingColors will work too except generation 1.
As long as you can connect the light to the bridge, it will work.
The bridge supports up to 50 connected lights.
Both the old and the new 'Homekit ready' bridge are supported.
Because of limitations in the Hue API, Domoticz cannot 'see' the Hue Tap or the Hue dimmer switch.
LivingColors remote controls do not use the bridge but control the lights directly,
so Domoticz cannot 'see' these remotes.
Of course you can still use the Tap and LivingColors remotes, as the light status is polled by Domoticz.
External status changes to the Hue lights (via app, Tap, etc) will be reflected in Domoticz within 10 seconds.
Philips Hue wiki entry
Philips Hue forum topic
Forecast IO (Weather Lookup)
Aeon Labs Z-Stick S2
Z-Wave.me UZB Z-Wave plus usb stick
Vision Z-Wave Plus USB Stick
OpenTherm Gateway USB
Dutch DSMR smart meter with P1 port
These meters can be connected to Domoticz via a serial to USB converter cable.
Several ready made cables are available , but you can also create your own.
Depending on the type of meter a Baudrate of either 9600 or 115200 should be used.
f.i. Landis & Gyr E350 needs 115200, Kamstrup and Iskra often need 9600.
If one value does not work, try the other.
All meters with a S0 pulse port.
These meters are compatible too, but there are several methods to connect them to Domoticz.