machinon theme

vamp
Posts: 6
Joined: Saturday 06 October 2018 13:20
Target OS: Linux
Domoticz version:
Contact:

Re: machinon theme

Post by vamp » Saturday 06 October 2018 13:26

Hi there,

I installed the latest beta but i can not found the new icons...


Image

And the left top Domoticz icon is a bit ugly... :) your screenshots the theme is look mutch better! How to do the same result?

OK the browser flush cache is helped :)

But found a another bug:

Image

the "last seen" line is missing.

Ehh i found it in theme settings... :D No more problem...

Ronker
Posts: 6
Joined: Saturday 10 March 2018 8:24
Target OS: Raspberry Pi
Domoticz version: 4.9700
Contact:

Re: machinon theme

Post by Ronker » Saturday 06 October 2018 13:57

vamp wrote:
Saturday 06 October 2018 13:26
Hi there,

I installed the latest beta but i can not found the new icons...


Image

And the left top Domoticz icon is a bit ugly... :) your screenshots the theme is look mutch better! How to do the same result?

OK the browser flush cache is helped :)

But found a another bug:

Image

the "last seen" line is missing.

Ehh i found it in theme settings... :D No more problem...

I have cleared the cache but still get the domoticz icon instead. Had to replace the image folder

User avatar
EdddieN
Posts: 523
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Monday 08 October 2018 13:13

updated to zeplin a darker blue bar plus also added a notification icon. The icon only appears when something (yet to be decided) needs to be decided by the system, like an unplanned reboot, etc..
Dashboard_Dark.jpg
Dashboard_Dark.jpg (226.92 KiB) Viewed 400 times

Dashboard_light.jpg
Dashboard_light.jpg (244.48 KiB) Viewed 400 times
11101101 - www.machinon.com

User avatar
EdddieN
Posts: 523
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Tuesday 09 October 2018 19:53

Here is a thought, I just saw this post: http://www.domoticz.com/forum/viewtopic ... 68#p193764 which notifes via dzVents about a reboot or similar. Would be nice if these could be tied up on a 'Domoticz notification center' where things like reboots, warning about file systems (or even temperature), basically anything that is related to the operation of Domoticz and the RPI (or whatever hardware).

I have something similar in my NAS and I found it quite useful.
11101101 - www.machinon.com

User avatar
EdwinK
Posts: 1317
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Rhoon
Contact:

Re: machinon theme

Post by EdwinK » Tuesday 09 October 2018 19:57

Looking a bit strange, but with a refresh it's fixed.

Image
Running latest BETASTABLE on a Pi-3 | Toon Thermostat (rooted) | RFxcom | Dashticz V2 |
Back to stable for now, as beta ***** over my installation

User avatar
EdddieN
Posts: 523
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Tuesday 09 October 2018 20:04

EdwinK wrote:Looking a bit strange, but with a refresh it's fixed.

Image
That sounds like cache and app cache. Are you still seeing the screen like that?
11101101 - www.machinon.com

User avatar
EdwinK
Posts: 1317
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Rhoon
Contact:

Re: machinon theme

Post by EdwinK » Tuesday 09 October 2018 20:18

Only when I return to it after some time, refreshing fixes it. I;m going to clear the appcache when I'm ready for today
Running latest BETASTABLE on a Pi-3 | Toon Thermostat (rooted) | RFxcom | Dashticz V2 |
Back to stable for now, as beta ***** over my installation

User avatar
remb0
Posts: 989
Joined: Thursday 11 July 2013 22:21
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: machinon theme

Post by remb0 » Friday 12 October 2018 17:10

when does the beta pushed to the master?
I see some nice commits ;)

User avatar
EdddieN
Posts: 523
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Friday 12 October 2018 17:32

I use beta and it is pretty stable (for now), however there're a couple of issues with some browsers regarding tiles flex, @landaisbenj working hard to recode that part.

@landaisbenj and @DewGew had forked beta into further two branches (alphas?). I hope we could reach a stable milestone release soon as there're many new features planned, but best to close property stage 1.

I also like to say that without @landaisbenj and @DewGew involvement on this theme, this would not be possible - BIG thank you!

To check beta:
cd domoticz/www/styles
git clone https://github.com/EdddieN/machinon-domoticz_theme.git machinon-beta
cd machinon-beta
git checkout beta
11101101 - www.machinon.com

User avatar
heggink
Posts: 580
Joined: Tuesday 08 September 2015 21:44
Target OS: Raspberry Pi
Domoticz version: V4.9999
Location: NL
Contact:

Re: machinon theme

Post by heggink » Friday 12 October 2018 17:35

I use the beta and an very happy with it. Wish I had the time to contribute...
Pi3, latest beta
RFXCOM, z-wave (AEOTEC, switches, temhum, pir, contacts),
Plugwise2py, P1 'smart'meter & solar panel
Alexa, Wifi Cams motion detection
ESP: relays, PIR & Temp/TempHum
Geofence iCloud, Bluetooth & Wifi ping
Harmony hub, Nest

landaisbenj
Posts: 148
Joined: Wednesday 02 August 2017 18:12
Target OS: Raspberry Pi
Domoticz version: stable
Location: France
Contact:

Re: machinon theme

Post by landaisbenj » Friday 12 October 2018 20:30

heggink wrote:
Friday 12 October 2018 17:35
I use the beta and an very happy with it. Wish I had the time to contribute...
Wish i had More Time to contribute too :(
Platforme: Rpbi3b
Domoticz: Last stable
Bridge: RFLINK last stable

EastXIII
Posts: 10
Joined: Monday 08 October 2018 13:56
Target OS: Raspberry Pi
Domoticz version: Beta
Contact:

Re: machinon theme

Post by EastXIII » Friday 12 October 2018 21:07

Very, very nice theme! Thank you for that!

Because i'm busy building my custom Dashticz V2 dash I found that I'm searching for the IDX numbers quite often. They can be found in "Devices" obviously, but the Aurora theme has the great advantage, at least for me, that the IDX is visible in the block itself.
Not within the favorits section of Domoticz, but in the specific tabs it is.

Is this something that could be implemented in this beauty? Off course only when I'm not the only one seeing this advantage.

landaisbenj
Posts: 148
Joined: Wednesday 02 August 2017 18:12
Target OS: Raspberry Pi
Domoticz version: stable
Location: France
Contact:

Re: machinon theme

Post by landaisbenj » Friday 12 October 2018 21:10

EastXIII wrote:
Friday 12 October 2018 21:07
Very, very nice theme! Thank you for that!

Because i'm busy building my custom Dashticz V2 dash I found that I'm searching for the IDX numbers quite often. They can be found in "Devices" obviously, but the Aurora theme has the great advantage, at least for me, that the IDX is visible in the block itself.
Not within the favorits section of Domoticz, but in the specific tabs it is.

Is this something that could be implemented in this beauty? Off course only when I'm not the only one seeing this advantage.
Yes i had think about this.. We must to open an issue to add this on our todo.
Platforme: Rpbi3b
Domoticz: Last stable
Bridge: RFLINK last stable

poudenes
Posts: 555
Joined: Wednesday 08 March 2017 10:42
Target OS: Linux
Domoticz version: 3.8993
Location: Amsterdam
Contact:

Re: machinon theme

Post by poudenes » Saturday 13 October 2018 7:44

EastXIII wrote:
Friday 12 October 2018 21:07
Very, very nice theme! Thank you for that!

Because i'm busy building my custom Dashticz V2 dash I found that I'm searching for the IDX numbers quite often. They can be found in "Devices" obviously, but the Aurora theme has the great advantage, at least for me, that the IDX is visible in the block itself.
Not within the favorits section of Domoticz, but in the specific tabs it is.

Is this something that could be implemented in this beauty? Off course only when I'm not the only one seeing this advantage.
That is a good idea. I'll like it!
RPi3 with OSMC - RPi3 with Domoticz - Dashticz - MiLight - Nanolead Aurora - KaKu - Logitech Hamony - Nest - RFLink

User avatar
EdwinK
Posts: 1317
Joined: Sunday 22 January 2017 22:46
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Rhoon
Contact:

Re: machinon theme

Post by EdwinK » Saturday 13 October 2018 9:17

EdwinK wrote:
Tuesday 09 October 2018 20:18
Only when I return to it after some time, refreshing fixes it. I;m going to clear the appcache when I'm ready for today
And nw, suddenly it works like it should.
Running latest BETASTABLE on a Pi-3 | Toon Thermostat (rooted) | RFxcom | Dashticz V2 |
Back to stable for now, as beta ***** over my installation

User avatar
heggink
Posts: 580
Joined: Tuesday 08 September 2015 21:44
Target OS: Raspberry Pi
Domoticz version: V4.9999
Location: NL
Contact:

Re: machinon theme

Post by heggink » Saturday 13 October 2018 9:17

It's a shame that so much in domoticz is dependent on the idx. One reason I really like dzvents. Replacing a device is a no maintenance event. Idx' really should be an internal thing.
Pi3, latest beta
RFXCOM, z-wave (AEOTEC, switches, temhum, pir, contacts),
Plugwise2py, P1 'smart'meter & solar panel
Alexa, Wifi Cams motion detection
ESP: relays, PIR & Temp/TempHum
Geofence iCloud, Bluetooth & Wifi ping
Harmony hub, Nest

poudenes
Posts: 555
Joined: Wednesday 08 March 2017 10:42
Target OS: Linux
Domoticz version: 3.8993
Location: Amsterdam
Contact:

Re: machinon theme

Post by poudenes » Saturday 13 October 2018 19:24

heggink wrote:
Saturday 13 October 2018 9:17
It's a shame that so much in domoticz is dependent on the idx. One reason I really like dzvents. Replacing a device is a no maintenance event. Idx' really should be an internal thing.
I have a global_data and give any IDX a name. When a device change and also IDX i only have to change it on the global_data and all my dzvents script are working normal without changing anything
RPi3 with OSMC - RPi3 with Domoticz - Dashticz - MiLight - Nanolead Aurora - KaKu - Logitech Hamony - Nest - RFLink

User avatar
heggink
Posts: 580
Joined: Tuesday 08 September 2015 21:44
Target OS: Raspberry Pi
Domoticz version: V4.9999
Location: NL
Contact:

Re: machinon theme

Post by heggink » Sunday 14 October 2018 10:01

I know but that doesn't work for things like dashticz and you still need to maintain global data. My point was more generic in a sense that the idx should have been an internal thing. Even blockly works with idx so if you swap a device, you need to update it...
Pi3, latest beta
RFXCOM, z-wave (AEOTEC, switches, temhum, pir, contacts),
Plugwise2py, P1 'smart'meter & solar panel
Alexa, Wifi Cams motion detection
ESP: relays, PIR & Temp/TempHum
Geofence iCloud, Bluetooth & Wifi ping
Harmony hub, Nest

User avatar
EdddieN
Posts: 523
Joined: Wednesday 16 November 2016 12:31
Target OS: Raspberry Pi
Domoticz version: 4.9700
Location: Scotland
Contact:

Re: machinon theme

Post by EdddieN » Monday 15 October 2018 11:42

Anyone that could help us make this happen?
https://github.com/EdddieN/machinon-dom ... issues/138
11101101 - www.machinon.com

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests