Make EM6590 smoke alarm beep?

For Z-Wave related questions in Domoticz
Post Reply
User avatar
arjanvdwiel
Posts: 15
Joined: Thursday 15 January 2015 23:46
Target OS: Raspberry Pi
Domoticz version: V2.2284
Location: NL
Contact:

Make EM6590 smoke alarm beep?

Post by arjanvdwiel » Thursday 07 May 2015 15:57

I have a few Eminent EM6590 smoke detectors, which i can detect in domoticz.

When i press the (test) button on the smoke alarm, the domoticz-status is changed to 'on'.

But is there any way to trigger the alarms from domoticz? This way i can sync them so they all go off simultaneously? :roll:
RPi - RFXtrx433E - Mi Light - ICY Thermostat - Rubicson TX95 - HomeEasy EU - SelectPlus Chime - Elro AB400 - PT2262 Door sensors

D'rMorris
Posts: 296
Joined: Thursday 01 May 2014 9:01
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands - Sittard
Contact:

Re: Make EM6590 smoke alarm beep?

Post by D'rMorris » Thursday 07 May 2015 17:21

Yes, there is :). For example, if you have a PIR and you want the smoke detector to go off on motion you use:

Code: Select all

commandArray = {}

if (devicechanged['PIR'] == 'On')
then
print('Motion detected')
commandArray['SendNotification']='Motion detected#Motion detected somewhere!#2'
commandArray['SMOKEDETECTOR']='On'
end

return commandArray



User avatar
Derik
Posts: 1862
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: Make EM6590 smoke alarm beep?

Post by Derik » Thursday 07 May 2015 20:39

D'rMorris wrote:Yes, there is :). For example, if you have a PIR and you want the smoke detector to go off on motion you use:

Code: Select all

commandArray = {}

if (devicechanged['PIR'] == 'On')
then
print('Motion detected')
commandArray['SendNotification']='Motion detected#Motion detected somewhere!#2'
commandArray['SMOKEDETECTOR']='On'
end

return commandArray
And where do i have to place this?
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups

D'rMorris
Posts: 296
Joined: Thursday 01 May 2014 9:01
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands - Sittard
Contact:

Re: Make EM6590 smoke alarm beep?

Post by D'rMorris » Thursday 07 May 2015 20:43

Start by reading how to use LUA in the wiki: http://domoticz.com/wiki/Main_Page

User avatar
arjanvdwiel
Posts: 15
Joined: Thursday 15 January 2015 23:46
Target OS: Raspberry Pi
Domoticz version: V2.2284
Location: NL
Contact:

Re: Make EM6590 smoke alarm beep?

Post by arjanvdwiel » Friday 08 May 2015 10:41

The smoke detector is shown as a switch. When i switch it 'on' in domoticz, it doesnt start beeping..

So i guess a lua script wont work..
RPi - RFXtrx433E - Mi Light - ICY Thermostat - Rubicson TX95 - HomeEasy EU - SelectPlus Chime - Elro AB400 - PT2262 Door sensors

User avatar
Egregius
Posts: 2429
Joined: Thursday 09 April 2015 12:19
Target OS: Linux
Domoticz version: Beta
Location: Beitem, BE
Contact:

Re: Make EM6590 smoke alarm beep?

Post by Egregius » Friday 08 May 2015 10:52

I guess something else is wrong then.

I can test my smoke detectors by clicking the icon and let them beep with blocky. Should be possible in LUA also then.
Image

D'rMorris
Posts: 296
Joined: Thursday 01 May 2014 9:01
Target OS: Raspberry Pi
Domoticz version:
Location: Netherlands - Sittard
Contact:

Re: Make EM6590 smoke alarm beep?

Post by D'rMorris » Friday 08 May 2015 12:00

arjanvdwiel wrote:The smoke detector is shown as a switch. When i switch it 'on' in domoticz, it doesnt start beeping..

So i guess a lua script wont work..
It should be shown as a KD-101 and a fire icon, not a switch. Perhaps you can post a screenshot of the culprit?

User avatar
arjanvdwiel
Posts: 15
Joined: Thursday 15 January 2015 23:46
Target OS: Raspberry Pi
Domoticz version: V2.2284
Location: NL
Contact:

Re: Make EM6590 smoke alarm beep?

Post by arjanvdwiel » Friday 08 May 2015 14:20

Image

This is how i see them in domoticz
RPi - RFXtrx433E - Mi Light - ICY Thermostat - Rubicson TX95 - HomeEasy EU - SelectPlus Chime - Elro AB400 - PT2262 Door sensors

User avatar
Egregius
Posts: 2429
Joined: Thursday 09 April 2015 12:19
Target OS: Linux
Domoticz version: Beta
Location: Beitem, BE
Contact:

Re: Make EM6590 smoke alarm beep?

Post by Egregius » Friday 08 May 2015 14:22

Clicking on the round icon with flames does nothing?
Nevermind the KD-101 type, that's 433Mhz version (like mine and D'rMorris).

User avatar
arjanvdwiel
Posts: 15
Joined: Thursday 15 January 2015 23:46
Target OS: Raspberry Pi
Domoticz version: V2.2284
Location: NL
Contact:

Re: Make EM6590 smoke alarm beep?

Post by arjanvdwiel » Friday 08 May 2015 15:15

Clicking on the flames turns them on, and reset turns them off.

But no sound..
RPi - RFXtrx433E - Mi Light - ICY Thermostat - Rubicson TX95 - HomeEasy EU - SelectPlus Chime - Elro AB400 - PT2262 Door sensors

rik82
Posts: 5
Joined: Tuesday 09 June 2015 14:43
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Make EM6590 smoke alarm beep?

Post by rik82 » Sunday 10 January 2016 18:46

I have the same problem. Can't send on signal to pt2262 smoke detector...

User avatar
proohu01
Posts: 177
Joined: Friday 17 October 2014 12:20
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: Make EM6590 smoke alarm beep?

Post by proohu01 » Wednesday 09 March 2016 19:38

arjanvdwiel wrote:Image

This is how i see them in domoticz

Hi arjanvdwiel,

Would you mind sharing you smoke detector icon on the forum? (or PM) I like it and there is nothing in Domoticz like that by default.
Also, how did you get a reset button and how do you send this command to the smoke detector?
Pi 2 B | Pi Camera | PiFace 2 | RFXtrx433E (KaKu + Oregon Scientific) | Plugwise (9 Circles) | Aeon Z-Wave stick (Fibaro - dimmers, sockets, RGB, screens/blinds) | RFXMeter (Kwh/water/gaz) | WOL | Onkyo Receiver | RTC | Hikvision | Netatmo | Satel Integra

User avatar
jvdz
Posts: 1012
Joined: Tuesday 30 December 2014 20:25
Target OS: Raspberry Pi
Domoticz version: Stable
Location: Netherlands
Contact:

Re: Make EM6590 smoke alarm beep?

Post by jvdz » Wednesday 09 March 2016 19:41

The shown Icon and reset button are there with a standard installation for me (Everspring SF812 Smoke Alarms)

Jos

User avatar
proohu01
Posts: 177
Joined: Friday 17 October 2014 12:20
Target OS: Raspberry Pi
Domoticz version: Beta
Location: The Netherlands
Contact:

Re: Make EM6590 smoke alarm beep?

Post by proohu01 » Wednesday 09 March 2016 20:06

My bad! Looking in the wrong place. Found it. Sorry for hijacking this post.
Pi 2 B | Pi Camera | PiFace 2 | RFXtrx433E (KaKu + Oregon Scientific) | Plugwise (9 Circles) | Aeon Z-Wave stick (Fibaro - dimmers, sockets, RGB, screens/blinds) | RFXMeter (Kwh/water/gaz) | WOL | Onkyo Receiver | RTC | Hikvision | Netatmo | Satel Integra

adsernl
Posts: 3
Joined: Monday 14 December 2015 10:11
Target OS: Raspberry Pi
Domoticz version:
Contact:

Re: Make EM6590 smoke alarm beep?

Post by adsernl » Wednesday 16 March 2016 14:43

All,

i got the same problem with my pt2262 smoke detector. How can i make it beep?
thanks already

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests